RLT350-0.3-15 UV-LED lamp RLT350-0.3-15 is a InGaN UV-LED mounted on a lead frame with a clear UV resistant epoxy lens. On forward bias it emits UV light, which peaks at 351 nm. package dimensions emitted light spectrum Key Specifications HVPE epitaxy process Chip material: InGaN Peak wavelength: typ. 351 nm Package type: Lead Frame Resin material: 5 mm clear UV resistant epoxy photography Absolute Maximum Ratings (Ta = 25 °C) Item Symbol Maximum Rated Value Unit Ambient Temperature Power Dissipation PD 130 mW Ta = 25°C Forward Current Pulse Forward Current IF IFP 30 80 mA mA Ta = 25°C Ta = 25°C Reverse Voltage VR 5 V Ta = 25°C Operating Temperature Storage Temperature TOPR TSTG -20 ~ +80 -40 ~ +100 °C °C Soldering Temperature TSOL 260 °C ‡ Pulse forward current condition: duty cycle = 10% and pulse width = 10 ms. Soldering condition: soldering must be completed within 3 seconds at 260°C Optical and Electrical Characteristics (Ta = 25 °C) Item Symbol Condition Minimum Typical Maximum Unit 3.6 4.3 5.0 V 100 Forward Voltage VF IF = 20 mA Reverse Current Radiated Power IR PO VR = 5 V IF = 20 mA 100 200 350 uA µW Peak Wavelength λP IF = 20 mA 350 351 353 nm Spectral Half Width Viewing Half Angle Δλ θ1/2 IF = 20 mA IF = 20 mA 8 10 ±15 12 nm deg 17.08.2010 rlt350_03_15.doc 1 of 1