DFN1010-4

PACKAGE INFORMATION
•
PE-DFN1010-4-120323
DFN1010-4
Unit: mm
PACKAGE DIMENSIONS
0.22±0.05
5
.0
±0
0.
48
1.00
A
48
0.
±0
.0
5
0.05 M AB
B
3
4
∗
×4
1.00
45
°
0.05
C0.12
0.1 +0.08
−0.03
INDEX
2
1
0.65
Bottom View
S
0.25±0.05
0.4Max.
4-C0.157
∗) Tab is VDD or GND level. (They are connected to
the reverse side of this IC.)
The tab is better to be connected to the VDD or
GND, but leaving it open is also acceptable.
0.05 S
4.0±0.1
1.1
3.5±0.05
1.5 +0.1
0
2.0±0.1
0.55±0.1
0.5±0.1
8.0±0.3
2.0±0.05
0.2±0.1
1.75±0.1
TAPING SPECIFICATION
1.1
TR
User Direction of Feed
TAPING REEL DIMENSIONS
REUSE REEL (EIAJ-RRM-08Bc)
11.4±1.0
(1reel=10,000pcs)
21±0.8
∅13±0.2
2±0.5
∅ 60 +1
0
0
∅ 180 −1.5
9.0±0.3
PACKAGE INFORMATION
PE-DFN1010-4-120323
POWER DISSIPATION (DFN1010-4)
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board.
This specification is based on the measurement at the condition below:
Measurement Conditions
Standard Land Pattern
Environment
Mounting on Board (Wind velocity=0m/s)
Board Material
Glass cloth epoxy plastic (Double sided)
Board Dimensions
40mm × 40mm × 1.6mm
Copper Ratio
Top side : Approx. 50% , Back side : Approx. 50%
Through-holes
φ0.54mm × 24pcs
Measurement Results
(Topt=25°C, Tjmax=125°C)
400mW
Thermal Resistance
θja=(125−25°C)/0.4W=250°C/W
Thermal Resistance
θjc=67°C/W
40
600
500
500
On Board
400
400
300
40
Power Dissipation PD (mW)
Standard Land Pattern
Power Dissipation
150
200
100
0
Free Air
0
25
85
50
75
100
125
Ambient Temperature (°C)
150
Measurement Board Pattern
IC Mount Area
Power Dissipation
RP110L
∗The volume is calculated on the supposition that
operating four hours/day.
4
3
0.40
1
0.22
RP109L
Operating Estimated
years∗
time
13,000hrs
9 years
0.25
0.47
Product Name
RECOMMENDED LAND PATTERN
1.30
The above graph shows the Power Dissipation of the
package based on Tjmax=125°C and Tjmax=150°C.
Operating the IC in the shaded area in the graph might
have an influence it's lifetime.
Operating time must be within the time limit described in
the table below, in case of operating in the shaded area.
(Unit: mm)
2
0.65
∗) In common with DFN(PLP)1010-4.
(Unit: mm)