PACKAGE INFORMATION • PE-SC-88A-100709 SC-88A Unit: mm PACKAGE DIMENSIONS 5 0.15±0.07 B 1.3±0.2 0.36±0.1 2.0±0.2 A 4 2.1±0.3 +0.2 1.25 −0.1 2 0 1 4 3 0.65 1 0.10 S AB 0.10 S S 0 0.1 +0.1 0.9 −0.2 +0.1 0.2−0.05 1.1Max. 1 0.15 TAPING SPECIFICATION +0.1 4.0±0.1 ∅1.5 0 2.0±0.05 8.0±0.3 2.4 3.5±0.05 1.75±0.1 0.2±0.1 2.3 1.6Max. ∅1.05±0.1 4.0±0.1 TR User Direction of Feed TAPING REEL DIMENSIONS REUSE REEL (EIAJ-RRM-08Bc) 11.4±1.0 9.0±0.3 2±0.5 21±0.8 +1 60 0 0 180 −1.5 13±0.2 (1reel=3,000pcs) PACKAGE INFORMATION PE-SC-88A-100709 POWER DISSIPATION (SC-88A) This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: Measurement Conditions Standard Land Pattern Environment Mounting on Board (Wind velocity=0m/s) Board Material Glass cloth epoxy plastic (Double sided) Board Dimensions 40mm × 40mm × 1.6mm Copper Ratio Top side : Approx. 50%, Back side : Approx. 50% Through-holes φ0.5mm × 44pcs Measurement Results (Topt=25°C, Tjmax=125°C) Standard Land Pattern Free Air Power Dissipation 380mW 150mW Thermal Resistance θja=(125−25°C)/0.38W=263°C/W θja=(125−25°C)/0.15W=667°C/W Thermal Resistance θjc=75°C/W − 40 475 500 On Board 400 380 300 40 Power Dissipation PD (mW) 600 200 150 100 Free Air 0 0 25 50 75 85 100 125 150 Measurement Board Pattem Ambient Temperature (°C) Power Dissipation IC Mount Area (Unit: mm) RP105Q RP109Q RP114Q RP171Q RP200Q RP201Q Operating time Estimated years∗ 13,000hrs 9years RP170Q ∗The volume is calculated on the supposition that operating four hours/day. 0.35 1.90 Product Name RECOMMENDED LAND PATTERN 0.7 The above graph shows the Power Dissipation of the package based on Tjmax=125°C and Tjmax=150°C. Operating the IC in the shaded area in the graph might have an influence it's lifetime. Operating time must be within the time limit described in the table below, in case of operating in the shaded area. 0.65 (Unit: mm)