PACKAGE INFORMATION • PE-DFN1212-6-100709 DFN1212-6 Unit: mm PACKAGE DIMENSIONS 0.94±0.05 B 4 6 0.05 0.4Max. INDEX S 1 3 0.05 0.20±0.05 C0.15 0.30±0.05 1.20 ×4 0.20±0.05 1.20 A 0.40 0.18±0.05 0.05 M AB Bottom View ) Tab in the parts have VDD or GND level. (They are connected to the back side of the IC.) Do not connect to other wires or land patterns. 0.05 S 4.0±0.1 1.5 +0.1 0 1.3 3.5±0.05 2.0±0.05 8.0±0.3 0.2±0.1 1.75±0.1 TAPING SPECIFICATION 4.0±0.1 1.2Max. TR TAPING REEL DIMENSIONS 0.5±0.1 1.3 User Direction of Feed REUSE REEL (EIAJ-RRM-08Bc) 11.4±1.0 (1reel=5,000pcs) 21±0.8 0 ∅ 180 −1.5 ∅ 60 +1 0 2±0.5 ∅13±0.2 9.0±0.3 PACKAGE INFORMATION PE-DFN1212-6-100709 POWER DISSIPATION (DFN1212-6) This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: Measurement Conditions Standard Land Pattern Environment Mounting on Board (Wind velocity=0m/s) Board Material Glass cloth epoxy plastic (Double sided) Board Dimensions 40mm × 40mm × 1.6mm Copper Ratio Top side : Approx. 50% , Back side : Approx. 50% Through-holes φ0.5mm × 28pcs Measurement Results (Topt=25°C, Tjmax=125°C) Standard Land Pattern Power Dissipation 600mW Thermal Resistance θja=(125−25°C)/0.6W=167°C/W Thermal Resistance θjc=30°C/W 40 750 700 600 600 500 400 40 Power Dissipation PD (mW) 800 300 200 100 0 0 25 50 75 85 100 Ambient Temperature (°C) 125 150 Power Dissipation The above graph shows the Power Dissipation of the package based on Tjmax=125°C and Tjmax=150°C. Operating the IC in the shaded area in the graph might have an influence it's lifetime. Operating time must be within the time limit described in the table below, in case of operating in the shaded area. Measurement Board Pattern IC Mount Area (Unit: mm) RECOMMENDED LAND PATTERN 0.18 RP152L ∗The volume is calculated on the supposition that operating four hours/day. 0.30 0.35 Product Name 1.40 0.94 Operating Estimated years∗ time 13,000hrs 9 years 0.40 (Unit: mm)