Schottky Barrier Diode Datasheet RB168L-40TF Application AEC-Q101 Qualified Land Size Figure (Unit : mm) Dimensions (Unit : mm) General rectification 2.0 (PMDS) 5.0±0.3 4.5±0.2 1) Small power mold type 1.2±0.3 Features 4.2 2.0 2.6±0.15 0.1±0.02 1 2 PMDS 2) High reliability Cathode 2.0±0.2 1.5±0.2 3) Super low IR Structure ROHM : PMDS JEDEC : SOD-106 1 Construction 2 : Manufacture Date Anode Taping Dimensions (Unit : mm) Silicon epitaxial planar type 2.0±0.05 1.550.05 φ1.55±0.05 0.3 12±0.2 5.5±0.05 5.3±0.1 0.05 9.5±0.1 1.75±0.1 4.0±0.1 1.55 φ1.55 2.9±0.1 4.0±0.1 2.8MAX Absolute Maximum Ratings (Tc= 25°C) Parameter Symbol Conditions Limits Unit Repetitive peak reverse voltage VRM Duty≦0.5 40 V Reverse voltage VR Direct reverse voltage 40 V Average forward rectified current Io Glass epoxy board mounted, 60Hz half sin wave, 1 A 30 A Non-repetitive forward current surge peak IFSM resistive load, Tc=125ºC Max. 60Hz half sin wave, one cycle, non-repetitive at Ta=25ºC Tj - 150 °C Tstg - 55 to 150 °C Operating junction temperature Storage temperature Electrical Characteristics (Tj= 25°C) Symbol Conditions Min. Forward voltage VF IF=1.0A - - 0.65 V Reverse current IR VR=40V - - 0.55 A Parameter www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 1/5 Typ. Max. Unit 2015.07 - Rev.A Data Sheet RB168L-40TF Electrical Characteristic Curves 10 1000 REVERSE CURRENT : IR(A) FORWARD CURRENT : IF(A) Tj = 150°C Tj = 125°C 1 Tj = 75°C 0.1 Tj = 25°C 0.01 Tj = 25°C 0.001 0 10 Tj = 125°C 1 Tj = 75°C 0.1 0.01 Tj = 25°C Tj = 25°C 0.001 0.0001 100 200 300 400 500 600 700 800 900 1000 0 FORWARD VOLTAGE : VF(mV) VF-IF CHARACTERISTICS 10 20 30 40 REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS 1000 640 Tj = 25°C f = 1MHz FORWARD VOLTAGE : VF(mV) CAPACITANCE BETWEEN TERMINALS : Ct(pF) Tj = 150°C 100 100 10 0 5 10 15 20 25 620 610 600 Ave. : 576.8mV 590 580 570 560 30 REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Tj=25°C IF=1.0A n=30pcs 630 VF DISPERSION MAP 2/5 2015.07 - Rev.A Data Sheet RB168L-40TF Electrical Characteristic Curves 200 381 REVERSE CURRENT : IR(nA) 180 160 140 120 100 Ave. : 43.5nA 80 60 40 341 321 301 281 241 221 0 201 IR DISPERSION MAP Ct DISPERSION MAP 40 IFSM 300 1cyc 8.3ms Ta=25°C 250 Ave. : 118A 150 100 50 REVERSE RECOVERY TIME : trr(ns) PEAK SURGE FORWARD CURRENT : IFSM(A) 400 200 Ave. : 242pF 261 20 350 Tj=25°C f=1MHz VR=0V n=10pcs 361 CAPACITANCE BETWEEN TERMINALS : Ct(pF) Tj=25°C VR=40V n=30pcs 0 Tj=25°C IF=0.5A IR=1.0A Irr / IR=0.25 n=10pcs 35 30 25 20 15 Ave. : 7.9ns 10 5 0 IFSM DISPERSION MAP www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. trr DISPERSION MAP 3/5 2015.07 - Rev.A Data Sheet RB168L-40TF Electrical Characteristic Curves 1000 IFSM PEAK SURGE FORWARD CURRENT : IFSM(A) PEAK SURGE FORWARD CURRENT : IFSM(A) 1000 8.3 8.3 ms ms 1cyc Ta=25°C 100 10 time Ta=25°C 100 10 1 10 100 1 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 10 100 TIME : t(ms) IFSM-t CHARACTERISTICS 1.5 0.010 Tj = 150°C Tj = 150°C REVERSE POWER DISSIPATION : PR (W) FORWARD POWER DISSIPATION : PF (W) 1cyc IFSM 1.0 D = 1/2 Sin(θ=180) 0.5 DC 0.0 0.008 0.006 Sin(θ=180) 0.004 D = 1/2 DC 0.002 0.000 0 0.5 1 1.5 2 0 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-PF CHARACTERISTICS www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 10 20 30 40 REVERSE VOLTAGE : VR(V) VR-PR CHARACTERISTICS 4/5 2015.07 - Rev.A Data Sheet RB168L-40TF Electrical Characteristic Curves 3 Rth(j-a) AVERAGE RECTIFIED FORWARD CURRENT : Io(A) TRANSIENT THERMAL IMPEDANCE : Rth (°C/W) 1000 100 Rth(j-c) 10 Glass epoxy board mounted IM=100mA IF=1.0A 1 time IO 0A 0V VR 2 D=t/T VR=VRM/2 Tj=150°C T DC D = 1/2 1 Sin(θ=180) 1ms 300s 0.1 0.001 0 0.01 0.1 1 10 100 0 1000 TIME : t(s) Rth-t CHARACTERISTICS 25 50 75 100 125 150 AMBIENT TEMPERATURE : Ta(°C) DERATING CURVE (Io-Ta) 30 3 No destruction at 30kV IO 0A 0V VR 2 ELECTROSTATIC DISCHARGE TEST : ESD(kV) AVERAGE RECTIFIED FORWARD CURRENT : Io(A) t t DC T D=t/T VR=VRM/2 Tj=150°C D = 1/2 1 Sin(θ=180) 0 25 20 15 10 5 0 0 25 50 75 100 125 150 CASE TEMPERATURE : Tc(°C) DERATING CURVE (Io-Tc) www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. AVE. : 6.1kV C=200pF R=0 C=100pF R=1.5k ESD DISPERSION MAP 5/5 2015.07 - Rev.A Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. R1102A