2SAR293P5 Datasheet Middle Power Transistors (-30V / -1.0A) l Outline Parameter Value VCEO -30V IC -1A MPT3 (SC-62) l Features 1) Suitable for Middle Power Driver. 2) Complementary NPN Types : 2SCR293P5. 3) Low V CE(sat) VCE(sat)=-350mV(Max.). (IC/IB=-500mA/-25mA) l Inner circuit l Application LOW FREQUENCY AMPLIFIER, DRIVER l Packaging specifications Part No. Package Package size 2SAR293P5 MPT3 6595 Taping code T100 Basic Reel size Tape width ordering (mm) (mm) unit.(pcs) 330 16 1000 Marking ML www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 1/6 20150724 - Rev.001 2SAR293P5 Datasheet l Absolute maximum ratings (Ta = 25°C) Parameter Symbol VCBO VCEO VEBO IC ICP*1 PD*2 PD*3 Tj Tstg Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Power dissipation Junction temperature Range of storage temperature Values -30 -30 -6 -1 -2 0.5 2.0 150 -55 to +150 Unit V V V A A W W ℃ ℃ l Electrical characteristics (Ta = 25°C) Parameter Symbol Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cut-off current Emitter cut-off current BVCBO BVCEO Collector-emitter saturation voltage DC current gain Transition frequency Output capacitance Min. Values Typ. Max. IC = -10μA -30 - - V IC = -1mA -30 - - V -6 - - -100 -100 V nA nA - -150 -350 mV 270 - 680 - - 320 - MHz - 7 - pF - 60 - ns - 160 - ns - 50 - ns Conditions BVEBO ICBO IEBO IE = -10μA VCB = -30V VEB = -6V VCE(sat)*4 IC = -500mA, IB = -25mA hFE VCE = -2V, IC = -100mA VCE = -2V, IE = 100mA, f T*4 f = 100MHz VCB = -10V, IE = 0A, Cob f = 1MHz Turn-On time ton Storage time tstg Fall time tf IC = -500mA, IB1 = -25mA, IB2 = 25mA, VCC ⋍ -5V, RL = 10Ω See test circuit *1 Pw=10ms Sigle Pulse Unit *2 Each terminal mounted on a reference land. *3 Mounted on a ceramic board(40×40×0.7 mm) . *4 Pulsed www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 2/6 20150724 - Rev.001 2SAR293P5 Datasheet l Electrical characteristic curves(Ta = 25°C) Fig.1 Grounded Emitter Propagation Characteristics Fig.2 Typical Output Characteristics Fig.3 DC Current Gain vs. Collector Current(I) Fig.4 DC Current Gain vs. Collector Current(II) www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 3/6 20150724 - Rev.001 2SAR293P5 Datasheet l Electrical characteristic curves(Ta = 25°C) Fig.5 Collector-Emitter Saturation Voltage vs. Collector Current(I) Fig.6 Collector-Emitter Saturation Voltage vs. Collector Current(II) Fig.7 Base-Emitter Saturation Voltage vs. Collector Current Fig.8 Gain Bandwidth Product vs. Emitter Current www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 4/6 20150724 - Rev.001 2SAR293P5 Datasheet l Electrical characteristic curves(Ta = 25°C) Fig.9 Emitter input capacitance vs.Emitter-Base Voltage Collector output capacitance vs. Collector-Base Voltage Fig.10 Safe Operating Area SWITCHING TIME TEST CIRCUIT www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 5/6 20150724 - Rev.001 2SAR293P5 Datasheet l Dimensions www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 6/6 20150724 - Rev.001