Zener Diode Datasheet YFZVFH series Application AEC-Q101 Qualified Land size figure (Unit : mm) Dimensions (Unit : mm) Voltage regulation 1.1 0.17 0.10 0.05 2.0 1.40 0.10 0～ 0.10 3) By chip-mouter, automatic mouting is possible. 0.80 0.05 0.20 0.60 0.10 0.8 0.5 2.50 0.20 2) High reliability N6 1) Small power mold type (TUMD2M) 2.00 0.10 Features TUMD2M Cathode Structure ROHM : TUMD2M Construction dot (year week factory) day EX. YFZVFH3.6B Silicon epitaxial planar Taping dimensions (Unit : mm) 0.25±0.05 8.0±0.2 2.75 1.43±0.05 4.0±0.1 1.0 0.2 φ1.0±0.2 0 2.8±0.05 1.55 0.1 φ1.55±0.1 0 1.75±0.1 2.0±0.05 3.5±0.05 4.0±0.1 Anode 0.9±0.08 Absolute maximum ratings (Ta = 25°C) Parameter Symbol Limits Unit Power dissipation () P 500 mW Junction temperature Tj 150 °C Storage temperature Tstg 55 to 150 °C Operating temperature Topr 55 to 150 °C () Device mounted on glass-epoxy board(50×50mm, t=1.6mm) Solder land (10×10mm) www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 1/6 2015.05 - Rev.B Data Sheet YFZVFH series Electrical characteristics (Ta= 25°C) Symbol Dynamic Impedance : Reverse current : Zener voltage : VZ(V) TYP. ZZ() IR(A) IZ(mA) VR(V) IZ(mA) MAX. MAX. MIN. MAX. 0.5 YFZV 2.0B 2.020 2.200 20 140 20 120 0.7 YFZV 2.2B 2.220 2.410 20 120 20 120 2.430 2.630 1.0 YFZV 2.4B 20 100 20 120 2.690 2.910 1.0 YFZV 2.7B 20 100 20 100 3.010 3.220 1.0 YFZV 3.0B 20 80 20 50 3.320 3.530 1.0 YFZV 3.3B 20 70 20 20 3.600 3.845 1.0 YFZV 3.6B 20 60 20 10 3.890 4.160 1.0 YFZV 3.9B 20 50 20 5 4.170 4.430 1.0 YFZV 4.3B 20 40 20 5 4.550 4.800 1.0 YFZV 4.7B 20 25 20 5 4.940 5.200 1.5 YFZV 5.1B 20 20 20 5 5.450 5.730 2.5 YFZV 5.6B 20 13 20 5 5.960 6.270 3.0 YFZV 6.2B 20 10 20 5 6.490 6.830 3.5 YFZV 6.8B 20 8 20 2 7.070 7.450 4.0 YFZV 7.5B 20 8 20 0.5 7.780 8.190 5.0 YFZV 8.2B 20 8 20 0.5 8.570 9.010 6.0 YFZV 9.1B 20 8 20 0.5 9.410 9.900 7.0 YFZV 10B 20 8 20 0.2 10.500 11.050 8.0 YFZV 11B 10 10 10 0.2 11.440 12.030 9.0 YFZV 12B 10 12 10 0.2 12.550 13.210 10 YFZV 13B 10 14 10 0.2 13.890 14.620 11 YFZV 15B 10 16 10 0.2 15.250 16.040 12 YFZV 16B 10 18 10 0.2 16.820 17.700 13 YFZV 18B 10 23 10 0.2 18.630 19.590 15 YFZV 20B 10 28 10 0.2 20.640 21.710 17 YFZV 22B 5 30 5 0.2 22.610 23.770 19 YFZV 24B 5 35 5 0.2 24.970 26.260 21 YFZV 27B 5 45 5 0.2 27.700 29.130 23 YFZV 30B 5 55 5 0.2 30.320 31.880 25 YFZV 33B 5 65 5 0.2 32.790 34.490 27 YFZV 36B 5 75 5 0.2 35.360 37.190 30 YFZV 39B 5 85 5 0.2 (1) The zener voltage(VZ) is measured 40ms after power is supplied. (2) The Dynamic Impedance(ZZ) are measured by superimposing a minute alternating current on the regulated current(IZ) MARKING (TYPE NO.) TYPE YFZV 2.0B YFZV 2.2B YFZV 2.4B YFZV 2.7B YFZV 3.0B YFZV 3.3B YFZV 3.6B YFZV 3.9B YFZV 4.3B YFZV 4.7B YFZV 5.1B YFZV 5.6B YFZV 6.2B YFZV 6.8B YFZV 7.5B YFZV 8.2B TYPE NO. N1 N4 N5 N3 N4 N5 N6 N7 N8 N9 NA NB NC ND NE NF www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. TYPE YFZV 9.1B YFZV 10B YFZV 11B YFZV 12B YFZV 13B YFZV 15B YFZV 16B YFZV 18B YFZV 20B YFZV 22B YFZV 24B YFZV 27B YFZV 30B YFZV 33B YFZV 36B YFZV 39B 2/6 TYPE NO. NG NH NJ NK NL NM NN NP NQ NR NS NT NU NV NW NX 2015.05 - Rev.B Data Sheet YFZVFH series Electrical characteristic curves 100 3.6 3.9 4.7 5.6 4.3 5.1 6.2 3.3 3.0 6.8 7.5 8.2 9.1 10 11 12 13 15 2.7 2.4 10 2.2 16 18 20 22 24 27 30 33 36 39 ZENER CURRENT : IZ(mA) 2.0 1 0.1 0.01 0.001 0 5 10 15 20 25 30 35 40 ZENER VOLTAGE : VZ(V) VZ -IZ CHARACTERISTICS www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 3/6 2015.05 - Rev.B Data Sheet YFZVFH series Electrical characteristic curves 10000 500 REVERS SURGE MAXIMUM POWER : PRSM(W) POWER DISPERSION : Pd(mW) 600 400 300 200 100 0 0 50 100 150 t 1pulse 100 10 1 0.001 200 0.01 0.1 1 10 TIME : t(ms) PRSM-TIME CHARACTERISTICS AMBIENT TEMPERATURE : Ta(°C) Pd-Ta CHARACTERISTICS 0.08 35 %/°C 0.06 30 0.04 25 0.02 20 mV/°C 0 15 -0.02 10 -0.04 5 -0.06 0 -0.08 -5 TEMP.COEFFICIENCE : Z(mV/°C) 40 0.1 TEMP.COEFFICIENCE : Z(%/°C) PRSM 1000 -10 -0.1 0 5 10 15 20 25 30 35 40 ZENER VOLTAGE : VZ(V) Z -VZ CHARACTERISTICS www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 4/6 2015.05 - Rev.B Data Sheet YFZVFH9.1B Electrical Characteristic Curves 10000 REVERSE CURRENT : IR(pA) ZENER CURRENT : IZ(mA) 100 Ta = 125°C 10 Ta = 75°C 1 Ta = 25°C Ta = 25°C 0.1 0.01 Ta = 125°C 1000 100 10 Ta = 75°C 1 Ta = 25°C 0.1 0.001 7 8 9 10 0 11 1 2 3 5 6 REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS ZENER VOLTAGE : VZ(V) VZ -IZ CHARACTERISTICS 1000 9.1 ZENER VOLTAGE : VZ(V) f = 1MHz CAPACITANCE BETWEEN TERMINALS : Ct(pF) 4 100 10 Ta=25°C IZ=20mA n=30pcs 9 8.9 AVE. : 8.83V 8.8 8.7 8.6 0 1 2 3 4 5 6 REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. VZ DISPERSION MAP 5/6 2015.05 - Rev.B Data Sheet YFZVFH9.1B Electrical Characteristic Curves 1000 200 Ta=25°C VR=6V n=30pcs 800 700 600 Ta=25°C f=1MHz VR=0V n=10pcs 190 CAPACITANCE BETWEEN TERMINALS : Ct(pF) REVERSE CURRENT : IR(pA) 900 AVE. : 244pA 500 400 300 200 180 170 160 140 130 120 100 110 0 100 IR DISPERSION MAP AVE. : 126.3pF 150 Ct DISPERSION MAP DYNAMIC IMPEDANCE : ZZ() 100 10 1 0.1 1 10 ZENER CURRENT : IZ(mA) ZZ -IZ CHARACTERISTICS www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 6/6 2015.05 - Rev.B Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. R1102A