Part Number: XZDG68W-2 1.0X0.5mm SMD CHIP LED LAMP Package Schematics Features ● Ideal for indication light on hand held products ● Long life and robust package ● Variety of lens types and color choices available ● Package: 2000pcs / reel ● Moisture sensitivity level : level 3 ● RoHS compliant ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) DG (InGaN) Unit Operating Characteristics (TA=25°C) DG (InGaN) Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Forward Voltage (Typ.) (IF=20mA) VF 3.3 V VF 4.1 V Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 150 mA Forward Voltage (Max.) (IF=20mA) Power Dissipation PD 102.5 mW Reverse Current (Max.) (VR=5V) IR 50 uA Operating Temperature TA -40 ~ +85 λP 515 nm Tstg -40 ~ +85 Wavelength of Peak Emission (Typ.) (IF=20mA) Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 525 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 30 nm C 45 pF Storage Temperature Electrostatic Discharge Threshold (HBM) 450 °C V Capacitance (Typ.) (VF=0V, f=1MHz) Part Number XZDG68W-2 Emitting Color Green Emitting Material InGaN Lens-color Water Clear Apr 02,2011 Luminous Intensity (IF=20mA) mcd min. typ. 300 447 XDSB4268 SunLED Corporation Wavelength nm λP Viewing Angle 2θ 1/2 515 120° V2 Layout: Maggie L. P. 1/4 Part Number: XZDG68W-2 1.0X0.5mm SMD CHIP LED LAMP DG LED is recommended for reflow soldering and soldering profile is shown below. Apr 02,2011 XDSB4268 SunLED Corporation V2 Layout: Maggie L. P. 2/4 Part Number: XZDG68W-2 1.0X0.5mm SMD CHIP LED LAMP The device has a single mounting surface. The device must be mounted according to the specifications. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Apr 02,2011 XDSB4268 SunLED Corporation V2 Layout: Maggie L. P. 3/4 Part Number: XZDG68W-2 1.0X0.5mm SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Apr 02,2011 XDSB4268 SunLED Corporation V2 Layout: Maggie L. P. 4/4