G3VM-353B/E MOS FET Relays DIP 6-pin package, Analog-switching MOS FET Relays with SPST-NC Contact. RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections • Communication equipment 6 5 4 • Security systems OMRON logo • FA systems Model name LOT.NO. 932 Pin 1 mark • Test & Measurement equipment 1 3 2 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form DIP6 1b (SPST-NC) Terminals Load voltage (peak value) * Model 350 V G3VM-353B G3VM-353E G3VM-353E (TR) PCB Terminals Surface-mounting Terminals Minimum package quantity Number per tube Number per tape and reel 50 - - 1,500 * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25°C) Output Input Item LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Connection A Continuous Connection B load current Connection C Connection A ON current reduction Connection B rate Connection C Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF IFP ∆IF/°C VR TJ VOFF IO ∆IO/°C TJ VI-O Ta Tstg - Rating 50 1 −0.5 5 125 350 150 150 300 −1.5 −1.5 −3.0 125 2500 −40 to +85 −55 to +125 260 Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C °C °C Measurement conditions 100 µs pulses, 100 pps Ta ≥ 25°C Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram Connection A Connection A: AC peak/DC Connection B and C: DC Ta ≥ 25°C AC for 1 min With no icing or condensation With no icing or condensation 10 s Connection B Connection C 1 6 Load 2 5 3 4 or AC DC 1 6 2 5 3 4 1 6 2 5 3 4 Load DC Load DC ■ Electrical Characteristics (Ta = 25°C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 30 Trigger LED forward current IFC 1 3 Connection A 15 25 Maximum resistance with Connection B RON 8 14 output ON Connection C 4 7 Current leakage when the relay is open ILEAK 1.0 Capacity between terminals COFF 85 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 Turn-ON time tON 0.1 1.0 Turn-OFF time tOFF 1.0 3.0 Unit V µA pF mA Ω Ω Ω µA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V Note: 2. Turn-ON and Turn-OFF Times V = 0, f = 1 MHz IF 1 IOFF = 10 µA 6 RL VDD IO = 150 mA VOUT 2 4 IO = 150 mA IO = 300 mA IF = 5 mA, VOFF = 350 V V = 0, f = 1 MHz, IF = 5 mA IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60% 90% VOUT 10% IF = 5 mA, RL = 200 Ω, t ON t OFF VDD = 20 V(See note 2.) 1 G3VM-353B/E MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Load voltage (AC peak/DC) VDD - - 280 Unit V Operating LED forward current IF 5 - 25 mA Continuous load current (AC peak/DC) IO - - 150 mA Ambient operating temperature Ta −20 - 65 °C ■ Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature IO - Ta 80 60 40 20 400 Connection C 300 200 Connection A and B 0 20 40 60 80 100 20 40 60 80 100 0.6 0.8 1 1 IO = 150 mA t<1s 15 10 -20 2 0 20 40 On-state voltage VON (V) 60 80 IOFF = 10 µA 4 3 2 1 0 -40 100 Turn ON, Turn OFF time vs. Ambient temperature tON, tOFF - IF 0 -20 20 VDD = 20 V, RL = 200 Ω tOFF 500 300 tON 100 50 VDD = 20 V, RL = 200 Ω IF = 5 mA 80 100 ILEAK - Ta 1200 tOFF 1000 60 Current leakage vs. Ambient temperature Current leakage ILEAK (nA) Turn ON, Turn OFF time tON, tOFF (µs) Ta = 25ºC 40 Ambient temperature Ta (°C) tON, tOFF - Ta 2000 1.8 5 Ambient temperature Ta (°C) Turn ON, Turn OFF time vs. LED forward current 1.6 IFC - Ta 20 0 -200 1.4 Trigger LED forward current vs. Ambient temperature 5 -100 0 1.2 LED forward voltage VF (V) Trigger LED forward current IFC (mA) 0 1000 3 120 On-state resistance vs. Ambient temperature On-state resistance RON (Ω) Continuous load current IO (mA) 100 -1 5 RON - Ta Ta = 25°C -2 10 Ambient temperature Ta (°C) IO - VON 200 30 0.1 0 Ambient temperature Ta (°C) Continuous load current vs. On-state voltage 50 0.3 -20 120 Ta = 25°C 1 0 -20 100 0.5 100 0 Turn ON, Turn OFF time tON, tOFF (µs) IF - VF 500 LED forward current IF (mA) 100 Continuous load current IO (mA) LED forward current IF (mA) IF - Ta LED forward current vs. LED forward voltage 800 600 1000 VOFF = 350 V IF = 5 mA 100 10 400 tON 200 30 1 3 5 10 30 50 100 1 0 -40 -20 LED forward current IF (mA) ■ Safety Precautions • Refer to "Common Precautions" for all G3VM models. 2 0 20 40 60 80 100 Ambient temperature Ta (°C) 0 20 40 60 80 100 Ambient temperature Ta (°C) Appearance/Dimensions DIP6 type ■ Appearance DIP (Dual Inline Package) DIP6 OMRON logo Model name 932 Pin 1 mark LOT.NO. Note: The actual product is marked differently from the image shown here. ■ Dimensions (Unit: mm) PCB Terminals Surface-mounting Terminals Weight: 0.4 g PCB Dimensions (BOTTOM VIEW) Six, 0.8-dia. holes 2.54 Weight: 0.4 g (0.61) 2.54 7.12±0.25 7.12±0.25 6.4±0.25 (0.61) (1.52) (1.52) 6.4±0.25 Actual Mounting Pad Dimensions 7.62±0.25 0.8±0.25 7.62±0.25 (Recommended Value, TOP VIEW) 3.65 +0.15 −0.25 0.25 +0.1 −0.05 2.5 min. 1.2±0.15 0.5±0.1 2.54±0.25 3.65 +0.15 −0.25 4.0 +0.25 −0.2 2.54 2.54 1.0 min. 7.85 to 8.80 1.2±0.15 2.54±0.25 Note: The actual product is marked differently from the image shown here. 1.0 min. 10.0 max. 8.3 to 8.8 1.3 1.5 • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. K249-E1-01 0413(0413)(O)