Data Sheets - Skyworks Solutions, Inc.

DATA SHEET
SE5023L: 5 GHz, +26 dBm Power Amplifier
with Power Detector
Applications
Description
 DSSS 5 GHz WLAN (IEEE 802.11ac)
The SE5023L is a 5 GHz power amplifier offering high linear
power for wireless LAN applications.
 DSSS 5 GHz WLAN (IEEE 802.11n)
The SE5023L offers a high level of integration for a simplified
design, providing quicker time to market and higher application
board production yield. The device integrates all matching
elements, a temperature compensated, load insensitive power
detector with 15 dB of dynamic range and a 3.8 GHz notch filter.
 Access points, PCMCIA, PC cards
Features
 5 GHz matched +24 dBm 802.11ac power amplifier
For wireless LAN applications, the device meets the requirements
of IEEE 802.11ac and 802.11n, and delivers approximately
+24 dBm of 802.11ac output power or +26 dBm of 802.11n
output power at 5 V.
 External analog reference voltage (VREF) for maximum flexibility
 Buffered, temperature compensated power detector
 1.8% EVM, +24 dBm, 256 QAM, 802.11ac
3% EVM, +26 dBm, 64 QAM, 802.11n
A 2.85 V reference voltage on VREF is all that is required to enable
or disable the power amplifier.
 32 dB Gain
A block diagram of the SE5023L is shown in Figure 1. The device
pinout for the 20-pin QFN are shown in Figure 2. Signal pin
assignments and functional pin descriptions are described in
Table 1.
 Lead-free, RoHS-compliant and halogen-free
(20-pin, 4  4  0.9 mm) QFN package (MSL1, 260 C per
JEDEC J-STD-020)
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
SP2
SP1
VREF
RFIN
Bias
Input
Match
Intersatage
Match
Intersatage
Match
Output
Match
RFOUT
Detector
VCC1
VCC2
VDET
Note: RFIN and RFOUT include DC shunt to Ground.
External blocking capacitors are recommended.
VCC3
ts177
Figure 1. SE5023L Block Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202521B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 23, 2014
1
DATA SHEET • SE5023L: POWER AMPLIFIER WITH POWER DETECTOR
VCC1
VCC2
VCC3
GND
GND
20
19
18
17
16
VREF
1
15
GND
GND
2
14
GND
RFIN
3
13
RFOUT
GND
4
12
GND
VREF
5
11
GND
6
7
8
9
10
DET
VCC3
VCC2
SP2
SP1
ts178
Figure 2. SE5023L Pinout – 20-Pin QFN
(Top View)
Table 1. SE5023L Signal Descriptions
Pin
Name
Description
Pin
Name
Description
1
VREF
Reference voltage
9
VCC3
Third stage supply voltage
2
GND
Ground
10
DET
Analog power detector output
3
RFIN
Power amplifier RF input, DC block required
4
GND
Ground
5
VREF
Reference voltage
11, 12
13
14, 15, 16, 17
GND
Ground
RFOUT
Power amplifier RF output
GND
Ground
6
SP1
Port for optional capacitor to improve dynamic EVM
18
VCC3
Third stage supply voltage
7
SP2
Port for optional capacitor to improve dynamic EVM
19
VCC2
Second stage supply voltage
8
VCC2
Second stage supply voltage
20
VCC1
First stage supply voltage
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
2
September 23, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202521B
DATA SHEET • SE5023L: POWER AMPLIFIER WITH POWER DETECTOR
Electrical and Mechanical Specifications
The absolute maximum ratings of the SE5023L are provided in
Table 2. Recommended operating conditions are specified in
Table 3. Electrical specifications are provided in Tables 4 through
6. Figure 3 shows the power detector characteristics.
Table 2. SE5023L Absolute Maximum Ratings (Note 1)
Parameter
Symbol
Supply voltage on pins VCC3
VCC
Supply voltage on pins VCC1, VCC2
Power amplifier enable and reference voltage
VREF
RF input power, RFOUT into 50  match,
TCASE_MAX = 85 C
RFIN
Storage temperature range
TSTG
Maximum junction temperature
TJ
Electrostatic discharge:
ESD
Minimum
Maximum
Units
0.3
+6
V
0.3
VCC3
V
0.3
+3.6
V
+6
dBm
40
Human Body Model (HBM), Class 1B
+160
C
+160
C
500
V
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. SE5023L Recommended Operating Conditions
Parameter
Symbol
Supply voltage VCC3
VCC
Supply voltage VCC1, VCC2
Minimum
Maximum
Units
3.0
5.5
V
3.0
VCC3
V
Maximum case temperature
TCASE_MAX
40
+85
C
Reference voltage
VREF
2.8
2.9
V
Table 4. SE5023L Electrical Specifications: DC Characteristics (Note 1)
(VCC = 5.0 V, VREF = 2.85 V, TA = +25 C as Measured on Skyworks’ SE5023L-EK1 Evaluation Board, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Supply current
ICC_802.11a
POUT = 26 dBm, 54 Mbps, 64 QAM,
Quiescent current
IQC
No RF
Supply current
IOFF
VREF = 0 V, no RF
0.5
Bias control current
IEN
VREF = VREF_H,
Internal 2 k pull down resistor
10
Reference voltage enabled
VREF_H
Reference voltage current
IREF
Reference voltage disabled
VREF_L
150
2.80
VREF voltage set to 2.85 V
2.85
Max
Units
600
mA
300
mA
10
A
mA
2.9
10
0
V
mA
0.5
V
Note 1: Performance is guaranteed only under the conditions listed in this table.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202521B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 23, 2014
3
DATA SHEET • SE5023L: POWER AMPLIFIER WITH POWER DETECTOR
Table 5. SE5023L Electrical Specifications: AC Characteristics (Note 1)
(VCC = 5.0 V, VREF = 2.85 V, f = 5.4 GHz, TA = +25 C as Measured on the SE5023L-EK1 Evaluation Board, Unless Otherwise Noted)
Parameter
Symbol
Frequency range
Test Condition
Min
fL_U
Typical
5.15
Max
Units
5.85
GHz
MCS9, −35 dB DEVM,
UNII-1
UNII-2 & 3
+17
+22
+19
+24
dBm
dBm
+22
+24
+24
+26
dBm
dBm
+25
+27
+27
+29
dBm
dBm
+34
dBm
MCS9, −30 dB DEVM
Output power
POUT
UNII-1
UNII-2 & 3
MCS0, mask limited
UNII-1
UNII-2 & 3
Output 1 dB compression point
P1dB
No modulation
Small signal gain
S21
PIN = 25 dBm
Small signal gain variation
S21
Within each UNII Band
Gain at 3.8 GHz
S21_3.8
PIN = 25 dBm
2f
Harmonic
28
32
34
dB
3
POUT = +26 dBm, 5 V
dB
0
dB
−45
dBm/MHz
0.3
s
3f
Rise and fall time
tR, tF
0.15
Stability
STAB
POUT = +26 dBm, VCC = 5 V, 54 Mbps, 64QAM,
VSWR = 6:1, all phases
Tolerance to constant input power into
a mismatch load
Ruggedness
PIN = 10 dBm, CW, VSWR = 6:1, all phases
All non-harmonically related outputs
less than 50 dBc/100 kHz
No damage
Note 1: Performance is guaranteed only under the conditions listed in this table.
Table 6. SE5023L Electrical Specifications: Power Detector Characteristics (Note 1)
(VCC = 5.0 V, VREF = 2.85 V, f = 5.4 GHz, TA = +25 C as Measured on the SE5023L-EK1 Evaluation Board, Unless Otherwise Noted)
Parameter
Symbol
POUT detect range
PDR
Detector voltage
VDET
Test Condition
Min
Max
Units
0
Typical
P1dB
dBm
POUT = +26 dBm
0.8
1.2
V
POUT = No RF
0.22
0.33
V
5.15 GHz to 5.70 GHz
5.70 GHz to 5.85 GHz
−0.5
−0.5
+0.5
+0.5
dB
dB
POUT at constant VDET, VSWR = 3:1
−1.5
+1.5
dB
POUT at constant VDET,
Detector accuracy
ERRDET
Output impedance
PDZOUT
0.7
k
DC load impedance
PDZLOAD
26.5
k
Note 1: Performance is guaranteed only under the conditions listed in this table.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
4
September 23, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202521B
DATA SHEET • SE5023L: POWER AMPLIFIER WITH POWER DETECTOR
Power Detector Response
1.4
5150 MHz
1.2
5500 MHz
VDET (V)
1
5850 MHz
0.8
0.6
0.4
ts179
0.2
0
3
5
7
9
11
13
15
17
19
21
23
25
27
29
Output Power (dBm)
Figure 3. SE5023L Power Detector Characteristic over Frequency
Package Dimensions
The PCB layout footprint for the SE5023L is provided in Figure 4.
Typical part markings are shown in Figure 5. Package dimensions
for the 20-pin QFN are shown in Figure 6, and carrier tape
dimensions are provided in Figure 7.
Package Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SE5023L is rated to Moisture Sensitivity Level 1 (MSL1) at
260 C. It can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202521B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 23, 2014
5
DATA SHEET • SE5023L: POWER AMPLIFIER WITH POWER DETECTOR
2X 1.78
5X 1.02
5X 0.51
0.0
5X 0.51
2X 0.20
5X 1.02
2X 1.78
4.40
2.60
2X 1.78
5X 1.02
4X 0.20
5X 0.51
(0.25 REF) TYP
2.60
0.0
0.0
2X 0.20
4.40
R0.15 TYP
5X 0.51
5X 1.02
0.70
TYP
2X 1.78
2X 0.20
0.25 TYP
25X Ø0.254
4X Ø0.457
0.500 TYP
Board Metal
Via Pattern (Note 4)
4.50
4.40
2.40
0.20 TYP
0.95 TYP
0.95 TYP
2.40
4.40
0.20 TYP
4.50
0.80
TYP
0.70
TYP
0.35 TYP
0.500 TYP
4 × 4 QFN
Package
Outline
0.25 TYP
Solder Mask Pattern (Note 6)
0.500 TYP
Stencil Pattern (Note 5)
(61% solder coverage on center Pad)
Notes:
1. All dimensions are in millimeters.
2. Interpret dimensioning and tolerancing per ASME Y14.5M-1994.
3. Unless specified, dimensions are symmetrical about center lines.
4. Via hole recommendations: 0.025 mm Cu via wall plating (minimum). Via holes to be filled with conductive paste and plated over.
5. Stencil recommendations: 0.125 mm stencil thickness., laser cut apertures, trapezodial walls and rounded corners will offer better paste release.
6. Solder mask recommendations: contact board fabricator for recommended solder mask offset and tolerance.
Figure 4. PCB Layout Footprint for the SE5023L
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
6
September 23, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202521B
ts181
DATA SHEET • SE5023L: POWER AMPLIFIER WITH POWER DETECTOR
20
Pin 1
Indicator
19
18
17
16
Terminal
Finish Symbol
1
15
2
14
3
13
4
12
5
11
Part number
6
7
8
9
Lot Code
10
ts182
Figure 5. Typical Part Markings
(Top View)
4.00 ± 0.05
// 0.05 C
A
2.50 ± 0.05
0.85 ± 0.05
0.203 REF
B
O.30 x 45°
0.000 to 0.050
Pin 1
Indicator
Pin 1
Indicator
Exposed
Pad
4.00 ± 0.05
2.50 ± 0.05
R0.075
TYP
20X 0.15 MIN
0.05 C
2X
20X
0.05 C
2X R0.075
See Detail A
0.500
4
C
Top View
0.08 C
Seating
Plane
2X
Bottom View
Side View
Detail A
0.50 ± 0.05
Scale 2X
(20 PLCS)
0.25 ± 0.05
5
0.10
0.05
C A B
C
Notes:
1. All measurements are in millimeters.
2. Dimensioning and tolerancing according to ASME Y14.5M-1994.
3. Tolerancing (unless otherwise specified):
Decimal Tolerance:
Angular Tolerance:
X.X (1 PLC) ± 0.1 mm
±1°/2°
X.XX (2 PLCs) ± 0.05 mm
X.XXX (3 PLCs) ± 0.025 mm
4. Coplanarity applies to the exposed center ground pad as well as the terminal.
5. Dimension applies to metalized terminal. If the terminal has a radius, the dimension should not be measured in the radius area.
6. Plating requirements per source control drawing (SCD) 2504.
7. Unless specified, dimensions are symmetrical about center lines.
ts183
Figure 6. SE5023L 20-Pin QFN Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202521B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 23, 2014
7
DATA SHEET • SE5023L: POWER AMPLIFIER WITH POWER DETECTOR
2.00 ± 0.10 (Note 1)
Y
1.75 + 0.10
Ø1.5 Min.
4.35 ± 0.10
Ref. 3º
12.00 ± 0.30
Ø1.55 + 0.05
(Note 1)
5.50 ± 0.10
0.30 ± 0.05
4.00 ± 0.10 (Note 2)
Pin #1
Y
8.00 ± 0.10
Ref.
R0.25
4.35 ± 0.10
R
0. ef.
25
1.10 ± 0.10
Section Y-Y
Notes:
1. Measured from centreline of sprocket hole to centreline of pocket.
2. Cumulative tolerance of 10 sprocket holes is ±0.20 mm.
3. Other material available.
4. All measurements are in millimeters unless otherwise stated.
View “A”
Figure 7. SE5023L 20-pin QFN Carrier Tape Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
8
September 23, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202521B
ts184
DATA SHEET • SE5023L: POWER AMPLIFIER WITH POWER DETECTOR
Ordering Information
Model Name
SE5023L: 5 GHz, 26 dBm Power Amplifier with Power Detector
Manufacturing Part Number
Evaluation Board Part Number
SE5023L
SE5023L-EK1
Copyright © 2012-2014 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202521B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 23, 2014
9