Data Sheet - System Sensor

Outdoor, SelectableOutput Speaker
Strobes and DualVoltage Evacuation
Speakers for Ceiling
Applications
SpectrAlert® Advance outdoor audible visible products
are rich with features that cut installation times and
maximize profits.
Features
• Weatherproof per NEMA 4X, IP56
• Rated from –40°F to 151°F
• Plug-in design reduces ground faults
• Universal mounting plate with onboard shorting spring that tests
wiring continuity before devices are installed
• Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115,
135, 150, 177, and 185
• Automatic selection of 12- or 24-volt operation at 15 and
15/75 candela
• Rotary switch for speaker voltage (25 and 70.7 Vrms) and power
settings (1/4, 1/2, 1 and 2 watts)
• Compatible with System Sensor synchronization protocol and
legacy SpectrAlert products
• Tamper-resistant construction
• Listed for ceiling or wall mounting
Agency Listings
75S0
7320-1653:201
10-08-E
SpectrAlert Advance offers the broadest line of outdoor
speakers and speaker strobes in the industry. From metal and plastic
outdoor back boxes, to white and red plastic housings, to wall and
ceiling mounting options, SpectrAlert Advance can meet virtually any
application requirement.
Ceiling-mount outdoor speakers and speaker strobes can be used
indoors or outdoors in wet or dry applications, and can provide
reliable operation from −40°F to 151°F. These speakers provide
a broad frequency response range, low harmonic distortion and
maintain a high sound pressure level at all tap settings to provide
accurate and intelligible broadcast of evacuation messages.
Like the entire SpectrAlert Advance line, ceiling-mount outdoor
speakers and speaker strobes include a variety of features that
increase application flexibility and simplify installation. First, fieldselectable settings, including candela, speaker voltage and power
settings, and automatic selection of 12- or 24-volt operation enable
installers to easily adapt devices to meet requirements.
Next, these devices use a universal mounting plate with an onboard
shorting spring that ensures wiring continuity before devices are
installed, so installers can verify proper wiring without mounting the
devices and exposing them to potential construction damage. Once
the plates are mounted, all SpectrAlert Advance devices utilize a
plug-in design with a single captured screw to speed installation and
virtually eliminate costly ground faults.
Outdoor devices ship with weatherproof plastic back boxes (metal
back boxes are available separately) that accommodate in-andout wiring for daisy chaining devices. Plastic back boxes feature
removable side flanges and improved resistance to saltwater
corrosion. Knock-outs located on the back eliminate the need to drill
holes for screw-in mounting. Plastic and metal weatherproof back
boxes come with ¾-inch top and bottom conduit entries and ¾-inch
knock-outs at the back. A screw-in NPT plug with an O-ring gasket
for a watertight seal is included with each back box.
SpectrAlert® Advance Outdoor Speaker and Speaker Strobe Specifications
Architectural/Engineering Specifications
General
SpectrAlert Advance outdoor speakers and speaker strobes shall mount to a weatherproof back box. A universal mounting plate shall be
used for mounting ceiling and wall products. The notification appliance circuit and amplifier wiring shall terminate at the universal mounting
plate. Also, SpectrAlert Advance speaker strobes, when used with the Sync•Circuit™ Module accessory, shall be powered from a non-coded
notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated
notification appliance circuit outputs shall operate between 9 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate
between 17 and 33 volts. Outdoor SpectrAlert Advance products shall operate between –40°F and 151°F from a regulated DC, or full-wave
rectified, unfiltered power supply.
Speaker
Speaker shall be a System Sensor SpectrAlert Advance Model ______ dual-voltage transformer speaker capable of operating at 25.0 or 70.7
nominal Vrms. Speaker shall be listed to Underwriters Laboratories Standard S4048 for outdoor fire protective signaling systems. Speaker
shall have a frequency range of 400 to 4,000 Hz and shall have an operating temperature from –40°F to 150.8°F. Speaker shall have power
taps and wattage settings that are selected by rotary switches. The speaker must be installed with its weatherproof back box in order to
remain outdoor approved per UL listing S4048. The speaker shall be suitable for use in air handling spaces and wet environments.
Speaker Strobe Combination
The speaker strobe shall be a System Sensor Model _____ listed to UL 1638 and UL 1480 and be approved for fire protective signaling
systems. Speaker shall be capable of operating at 25.0 or 70.7 nominal Vrms and shall have a frequency range of 400 to 4,000 Hz. Speaker
shall have power taps that are selected by rotary switch. The strobe shall consist of a xenon flash tube with associated lens/reflector system
and operate on either 12 or 24 volts. The strobe shall also feature selectable candela output, providing options for 15 or 15/75 candela when
operating on 12 volts and 15, 15/75, 30, 75, 110, 115, 135, 150, 177 or 185 candela when operating on 24 volts. The strobe shall comply with
the Americans with Disabilities Act requirement for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage
range. The speaker strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The speaker strobe
shall be suitable for use in wet environments.
Physical Specifications
Operating Temperature
Dimensions, Ceiling-Mount
SPS Speaker Strobe
SP Speaker
Dimensions, Ceiling-Mount Weatherproof Back
Box
Electrical/Operating Specifications
Nominal Voltage (speakers)
Maximum Supervisory Voltage (speakers)
Strobe Flash Rate
Nominal Voltage (strobes)
Operating Voltage Range (includes fire alarm
panels with built in sync)
Operating Voltage with MDL Sync Module
Frequency Range
Power
AVDS00901
–40°F to 151°F (–40°C to 66°C)
6.8˝ Dia. × 4.7˝ D (including lens and speaker)
6.8˝ Dia. × 2.9˝ D
7.2˝ Dia. × 2.9˝ D
25 V or 70.7 V (nominal)
50 VDC
1 flash per second
Regulated 12 VDC/FWR or regulated 24 DC/FWR
8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal)
9 to 17.5 V (12 V nominal) or 17 to 33 V (24 V nominal)
400 to 4,000 Hz
¼, ½, 1, 2 watts
UL Current Draw Data
Candela Derating
UL Max. Strobe Current Draw (mA RMS)
8 to 17.5 Volts
DC
FWR
Candela
Standard
15
123
128
Candela Range
15/75
142
148
30
NA
NA
75
NA
NA
95
NA
NA
110
NA
NA
115
NA
NA
High
135
NA
NA
Candela Range
150
NA
NA
177
NA
NA
185
NA
NA
Sound Output
UL Reverberant (dBA @ 10 ft.)
2W
1W
Outdoor Speaker
90
87
Outdoor Speaker/Strobe
89
86
16 to 33 Volts
DC
FWR
66
71
77
81
94
96
158
153
181
176
202
195
210
205
228
207
246
220
281
251
286
258
½W
84
83
¼W
81
80
For K series products used at low
temperatures, listed candela ratings must be
reduced in accordance with this table.
Strobe Output (cd)
Listed Candela
15
15/75
30
75
95
110
115
135
150
177
185
Candela rating at
–40°F
Do not use below 32°F
44
70
110
115
135
150
177
185
Dimensions
7.19˝
.97˝
2.83˝
7.19˝
2.83˝
1.60˝
2.83˝
7.14˝
7.14˝
Ceiling-Mount Outdoor Speaker
Ceiling-Mount Outdoor Speaker Strobe
AVDS00901
Surface Mounting
Ceiling-Mount Speaker Strobe with Plastic Weatherproof Back Box
Ceiling-Mount Speaker with Plastic Weatherproof Back Box
Ceiling-Mount Speaker Strobe with Metal Weatherproof Back Box
Ceiling-Mount Speaker with Metal Weatherproof Back Box
Ordering Information for SpectrAlert® Advance Outdoor Speakers and Speaker Strobes
Ceiling Mount
White
SPCWK
SPSCWK
SPSCWHK
SPSCWHK-P
SPSCWK-CLRALERT
Accessories
White
MWBBCW
Red
—
—
—
—
—
Description
Outdoor Speaker (includes plastic weatherproof back box)
Outdoor Speaker Strobe, Standard cd, (includes plastic weatherproof back box)
Outdoor Speaker Strobe, High cd (includes plastic weatherproof back box)
Outdoor Speaker Strobe, High cd, PLAIN; (includes plastic weatherproof back box)
Outdoor Speaker Strobe, Selectable Candela, Clear Lens, ALERT Printed;
(includes plastic weatherproof back box)
Red
—
Description
Ceiling, Metal Weatherproof Back Box
Notes:
“Standard cd” refers to strobes that include 15, 15/75, 30, 75, 95, 110, and 115 candela settings. “High cd” refers to strobes that include 135, 150, 177, and 185
candela settings. When replacing standard outdoor units, both the device and back box must be replaced.
3825 Ohio Avenue • St. Charles, IL 60174
Phone: 800-SENSOR2 • Fax: 630-377-6495
©2012 System Sensor.
Product specifications subject to change without notice. Visit systemsensor.com
for current product information, including the latest version of this data sheet.
AVDS00901 • 03/12