Outdoor SelectableOutput Horns, Strobes, and Horn Strobes for Wall Applications SpectrAlert® Advance outdoor audible visible products are rich with features that cut installation times and maximize profits. Features • Weatherproof per NEMA 4X, IP56 • Listed to UL 1638 (strobe) and UL 464 (horn) • C ompatible with System Sensor synchronization protocol and legacy SpectrAlert products • F ield-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185 • A utomatic selection of 12- or 24-volt operation at 15 and 15/75 candela • Rotary switch for horn tone and three volume selections • Horn rated at 88+ dBA at 16 volts • Rated from –40°F to 151°F • U niversal mounting plate with an onboard shorting spring that tests wiring continuity before devices are installed • Plug-in design with minimal intrusion into the back box • Tamper-resistant construction • Listed for ceiling or wall mounting Agency Listings S4011 (chimes, horn strobes, horns) S3593 (outdoor and alert strobes) 3023572 MEA452-05-E 7300-1653:187 (outdoor strobes) 7125-1653:188 (horn strobes, chime strobes) 7135-1653:189 (horns, chimes) SpectrAlert Advance offers the broadest line of outdoor horns, strobes, and horn strobes in the industry. With white or red plastic housings, wall or ceiling mounting options, and plain or FIRE-printed devices, SpectrAlert Advance can meet virtually any application requirement, including indoor, outdoor, wet, and dry applications in temperatures from −40°F to 151°F. Like the entire SpectrAlert Advance line, outdoor horns, strobes, and horn strobes for wall applications include a variety of features that increase application flexibility and simplify installation. First, field-selectable settings, including candela, automatic selection of 12- or 24-volt operation, horn tones, and three volume options enable installers to easily adapt devices to meet requirements. Next, SpectrAlert Advance devices use a universal mounting plate for both wall and ceiling applications. This mounting plate includes an onboard shorting spring that ensures wiring continuity before devices are installed, so installers can verify proper wiring without mounting the devices and exposing them to potential construction damage. Once the plates are mounted, all SpectrAlert Advance devices utilize a plug-in design with a single captured screw to speed installation and virtually eliminate costly ground faults. Outdoor devices ship with weatherproof plastic back boxes (metal back boxes are available separately) that accommodate in-andout wiring for daisy chaining devices. Plastic back boxes feature removable side flanges and improved resistance to saltwater corrosion. Knock-outs located on the back eliminate the need to drill holes for screw-in mounting. Plastic and metal weatherproof back boxes come with ¾‑inch top and bottom conduit entries and ¾‑inch knock-outs at the back. A screw-in NPT plug with an O-ring gasket for a watertight seal is included with each back box. SpectrAlert Advance Outdoor Horn, Strobe, and Horn Strobe Specifications Architect/Engineer Specifications General SpectrAlert Advance outdoor horns, strobes, and horn strobes shall mount to a weatherproof back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance products, when used with the Sync•Circuit™ Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated notification appliance circuit outputs shall operate between 9 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 17 and 33 volts. Outdoor SpectrAlert Advance products shall operate between −40 and 151 degrees Fahrenheit from a regulated DC or full-wave rectified unfiltered power supply. Strobes and horn strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185. Strobe The strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1971 and shall be approved for fire protective service. The strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The strobe shall be suitable for use in wet environments. Horn Strobe Combination The horn strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1971 and UL 464 and shall be approved for fire protective service. The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to switch between a temporal three pattern and a non-temporal (continuous) pattern. These options shall be set by a multiple position switch. On four-wire products, the strobe shall be powered independently of the sounder. The horn or horn strobe models shall operate on a coded or non-coded power supply. The horn strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The horn strobe shall be suitable for use in wet environments. Physical/Electrical Specifications Operating Temperature –40°F to 151°F (–40°C to 66°C) Strobe Flash Rate 1 flash per second Nominal Voltage Regulated 12 DC/FWR or regulated 24 DC/FWR1 Operating Voltage Range2 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal) Input Terminal Wire Gauge 12 to 18 AWG Wall-Mount Dimensions (including lens) 5.6˝ L × 4.7˝ W × 2.5˝ D (142 mm L × 119 mm W × 64 mm D) Horn Dimensions 5.6˝ L × 4.7˝ W × 1.3˝ D (142 mm L × 119 mm W × 33 mm D) Wall-Mount Weatherproof Back Box Dimensions (SA-WBB) 5.7˝ L × 5.1˝ W × 2.0˝ D (145 mm L × 130 mm W × 51 mm D) Notes: 1. F ull Wave Rectified (FWR) voltage is a non-regulated, time-varying power source that is used on some power supply and panel outputs. 2. P, S, PC, and SC products will operate at 12 V nominal only for 15 and 15/75 cd. AVDS01201 UL Current Draw Data UL Max. Strobe Current Draw (mA RMS) UL Max. Horn Current Draw (mA RMS) 8–17.5 Volts 16–33 Volts 8–17.5 Volts Candela DC FWR DC FWR Sound Pattern dB DC FWR Standard 15 123 128 66 71 Temporal High 57 55 Candela 15/75 142 148 77 81 Temporal Medium 44 49 Range Temporal Low 38 44 30 NA NA 94 96 Non-Temporal High 57 56 75 NA NA 158 153 Non-Temporal Medium 42 50 95 NA NA 181 176 Non-Temporal Low 41 44 110 NA NA 202 195 Coded High 57 55 115 NA NA 210 205 Coded Medium 44 51 High 135 NA NA 228 207 Candela Coded Low 40 46 150 NA NA 246 220 Range 177 NA NA 281 251 185 NA NA 286 258 UL Max. Current Draw (mA RMS), 2-Wire Horn Strobe, Standard Candela Range (15–115 cd) 8–17.5 Volts 16–33 Volts DC Input 15 15/75 15 15/75 30 75 95 110 Temporal High 137 147 79 90 107 176 194 212 Temporal Medium 132 144 69 80 97 157 182 201 Temporal Low 132 143 66 77 93 154 179 198 Non-Temporal High 141 152 91 100 116 176 201 221 Non-Temporal Medium 133 145 75 85 102 163 187 207 Non-Temporal Low 131 144 68 79 96 156 182 201 FWR Input Temporal High 136 155 88 97 112 168 190 210 Temporal Medium 129 152 78 88 103 160 184 202 Temporal Low 129 151 76 86 101 160 184 194 Non-Temporal High 142 161 103 112 126 181 203 221 Non-Temporal Medium 134 155 85 95 110 166 189 208 184 202 Non-Temporal Low 132 154 80 90 105 161 UL Max. Current Draw (mA RMS), 2-Wire Horn Strobe, High Candela Range (135–185 cd) 16–33 Volts DC Input 135 150 177 185 FWR Input Temporal High 245 259 290 297 Temporal High Temporal Medium 235 253 288 297 Temporal Medium Temporal Low 232 251 282 292 Temporal Low Non-Temporal High 255 270 303 309 Non-Temporal High Non-Temporal Medium 242 259 293 299 Non-Temporal Medium Non-Temporal Low 238 254 291 295 Non-Temporal Low Candela Derating 115 218 210 207 229 216 210 218 206 201 229 216 211 177 258 250 248 275 262 256 185 265 258 256 281 267 262 Horn Tones and Sound Output Data For K series products used at low temperatures, listed candela ratings must be reduced in accordance with this table. Strobe Output (cd) Listed Candela 15 15/75 30 75 95 110 115 135 150 177 185 16–33 Volts 135 150 215 231 209 224 207 221 233 248 219 232 214 229 16–33 Volts DC FWR 69 75 58 69 44 48 69 75 60 69 50 50 69 75 56 69 52 50 Horn and Horn Strobe Output (dBA) Switch Position 1 2 3 4 Candela rating at –40°F Do not use below 32°F 44 70 110 115 135 150 177 185 5 6 7 8† 9† † Sound Pattern Temporal Temporal Temporal NonTemporal NonTemporal NonTemporal Coded Coded Coded 8–17.5 Volts dB DC FWR High 78 78 Medium 74 74 Low 71 73 High 82 82 Medium 16–33 Volts DC FWR 84 84 80 80 76 76 24-Volt Nominal Reverberant Anechoic DC FWR DC FWR 88 88 99 98 86 86 96 96 83 80 94 89 88 88 93 92 100 100 78 78 85 85 90 90 98 98 75 75 81 81 88 84 96 92 High 82 Medium 78 Low 75 82 78 75 88 85 81 88 85 81 93 90 88 92 90 85 101 101 97 98 96 92 Low Settings 7, 8, and 9 are not available on 2-wire horn strobe. † AVDS01201 SpectrAlert Advance Diagrams 4.7˝ 6.8˝ Dia. 2.5˝ 2.5˝ 5.6˝ Wall-Mount Horn Strobes Wall Plastic Weatherproof Back Box Wall-Mount Horn Strobe with Plastic Weatherproof Back Box SpectrAlert Advance Ordering Information Model Wall Horn Strobes P2RK*† P2RHK*† P2WK*† P2WHK*† P4RK† P4WK P2RHK-120 Wall Strobes SRK*† SRHK*† SWK*† SWHK*† Horns HRK† Accessories SA-WBB SA-WBBW Description 2-Wire Horn Strobe, Standard cd, Red, Outdoor (includes plastic weatherproof back box) 2-Wire Horn Strobe, High cd, Red, Outdoor (includes plastic weatherproof back box) 2-Wire Horn Strobe, Standard cd, White, Outdoor (includes plastic weatherproof back box) 2-Wire Horn Strobe, High cd, White, Outdoor (includes plastic weatherproof back box) 4-Wire Horn Strobe, Standard cd, Red, Outdoor (includes plastic weatherproof back box) 4-Wire Horn Strobe, Standard cd, White, Outdoor (includes plastic weatherproof back box) 2-Wire Horn Strobe, High cd, Red, Outdoor, 120 V (includes plastic weatherproof back box) Strobe, Standard cd, Red, Outdoor (includes plastic weatherproof back box) Strobe, High cd, Red, Outdoor (includes plastic weatherproof back box) Strobe, Standard cd, White, Outdoor (includes plastic weatherproof back box) Strobe, High cd, White, Outdoor (includes plastic weatherproof back box) Horn, Red, Outdoor (includes plastic weatherproof back box) Red, Metal Weatherproof Back Box White, Metal Weatherproof Back Box Notes: * Add “-P” to model number for plain housing (no “FIRE” marking on cover), e.g., P2RK-P. † Add “-R” to model number for weatherproof replacement device (no back box included), only for use with weatherproof outdoor flush mounting plate, WTP and WTPW. “Standard cd” refers to strobes that include 15, 15/75, 30, 75, 95, 110, and 115 candela settings. “High cd” refers to strobes that include 135, 150, 177, and 185 candela settings. When replacing standard outdoor units both the device and back box must be replaced. 3825 Ohio Avenue • St. Charles, IL 60174 Phone: 800-SENSOR2 • Fax: 630-377-6495 ©2012 System Sensor. Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. AVDS01201 • 3/12