Outdoor Selectable- Output Strobes and Horn

Outdoor SelectableOutput Strobes and
Horn Strobes for
Ceiling Applications
SpectrAlert® Advance outdoor audible visible products
are rich with features that cut installation times and
maximize profits.
Features
• Weatherproof NEMA 4X, IP56 rated
• Listed to UL 1638 (strobe) and UL 464 (horn)
• C
ompatible with System Sensor synchronization protocol and
legacy SpectrAlert products
• F
ield-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115,
135, 150, 177, and 185
• A
utomatic selection of 12- or 24-volt operation at 15 and 15/75 candela
• Rotary switch for horn tone and three volume selections
• Horn rated at 88+ dBA at 16 volts
• Rated from –40°F to 151°F
• U
niversal mounting plate with an onboard shorting spring that
tests wiring continuity before devices are installed
• Plug-in design with minimal intrusion into the back box
• Tamper-resistant construction
• Listed for ceiling or wall mounting
Agency Listings
S4011 (chimes, horn strobes, horns)
S3593 (outdoor and alert strobes)
3023572
MEA452-05-E
7300-1653:187 (outdoor strobes)
7125-1653:188 (horn strobes,
chime strobes)
7135-1653:189 (horns, chimes)
SpectrAlert Advance offers the broadest line of outdoor horns,
strobes, and horn strobes in the industry. With white or red plastic
housings, wall or ceiling mounting options, and plain or FIRE-printed
devices, SpectrAlert Advance can meet virtually any application
requirement, including indoor, outdoor, wet, and dry applications in
temperatures from −40°F to 151°F.
Like the entire SpectrAlert Advance line, outdoor strobes and horn
strobes for ceiling applications include a variety of features that
increase application flexibility and simplify installation. First, fieldselectable settings, including candela, automatic selection of 12- or
24-volt operation, horn tones, and three volume options enable
installers to easily adapt devices to meet requirements.
Next, SpectrAlert Advance devices use a universal mounting plate
for both wall and ceiling applications. This mounting plate includes
an onboard shorting spring that ensures wiring continuity before
devices are installed, so installers can verify proper wiring without
mounting the devices and exposing them to potential construction
damage. Once the plates are mounted, all SpectrAlert Advance
devices utilize a plug-in design with a single captured screw to
speed installation and virtually eliminate costly ground faults.
Outdoor devices ship with weatherproof plastic back boxes (metal
back boxes are available separately) that accommodate in-andout wiring for daisy chaining devices. Plastic back boxes feature
removable side flanges and improved resistance to saltwater
corrosion. Plastic and metal weatherproof back boxes come with
¾‑inch top and bottom conduit entries and ¾‑inch knock-outs at the
back. Three screw-in NPT plugs with O-ring gaskets for a watertight
seal is included with each back box.
SpectrAlert Advance Outdoor Strobe, and Horn Strobe Specifications
Architect/Engineer Specifications
General
SpectrAlert Advance outdoor horns, strobes, and horn strobes shall mount to a weatherproof back box. A universal mounting plate shall
be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate.
Also, SpectrAlert Advance products, when used with the Sync•Circuit™ Module accessory, shall be powered from a non-coded notification
appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated notification
appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between
16.5 and 33 volts. Outdoor SpectrAlert Advance products shall operate between −40 and 151 degrees Fahrenheit from a regulated DC or fullwave rectified unfiltered power supply. Strobes and horn strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95,
110, 115, 135, 150, 177, and 185.
Strobe
The strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1638 and shall be approved for fire protective service.
The strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for
visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash
tube and associated lens/reflector system. The strobe must be installed with its weatherproof back box in order to remain outdoor approved
per UL. The strobe shall be suitable for use in wet environments.
Horn Strobe Combination
The horn strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1638 and UL 464 and shall be approved for
fire protective service. The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with
Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light
shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to switch
between a temporal three pattern and a non-temporal (continuous) pattern. These options shall be set by a multiple position switch. On fourwire products, the strobe shall be powered independently of the sounder. The horn strobe on a 2-wire model shall work on a non-coded power
supply. The horn on 4-wire horn strobe models shall operate on a coded or non-coded power supply. The horn strobe must be installed with
its weatherproof back box in order to remain outdoor listed per UL. The horn strobe shall be suitable for use in wet environments.
Physical/Electrical Specifications
Operating Temperature
–40°F to 151°F (–40°C to 66°C)
Strobe Flash Rate
1 flash per second
Nominal Voltage
Regulated 12 DC/FWR or regulated 24 DC/FWR1
Operating Voltage Range2
8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal)
Operating Voltage Range with MDL3 Sync Module
8.5 to 17.5V (12 V nominal) or 16.5 to 33V (24 V nominal)
Input Terminal Wire Gauge
12 to 18 AWG
Ceiling-Mount Dimensions (including lens)
6.8˝ diameter × 2.5˝ high (173 mm diameter × 64 mm high)
Strobe / Horn Strobe Dimensions
5.6˝ L × 4.7˝ W × 1.3˝ D (142 mm L × 119 mm W × 33 mm D)
Strobe / Horn Strobe Dimensions with Back Box
5.6˝ L × 4.7˝ W × 1.3˝ D (142 mm L × 119 mm W × 33 mm D)
Ceiling-Mount Weatherproof Back Box Dimensions
7.1˝ diameter × 2.0˝ high (180 mm diameter × 51 mm high)
Notes:
1. F
ull Wave Rectified (FWR) voltage is a non-regulated, time-varying power source that is used on some power supply and panel outputs.
2. Products will operate at 12 V nominal only for 15 and 15/75 cd.
AVDS11401
UL Current Draw Data
UL Max. Strobe Current Draw (mA RMS)
UL Max. Horn Current Draw for 4-Wire Horn Strobes (mA RMS)
8–17.5 Volts
16–33 Volts
8–17.5 Volts
16–33 Volts
Candela DC
FWR
DC
FWR
Sound Pattern
dB
DC
FWR
DC
FWR
Standard
15
123
128
66
71
Temporal
High
57
55
69
75
Candela
15/75
142
148
77
81
Temporal
Medium
44
49
58
69
Range
Temporal
Low
38
44
44
48
30
NA
NA
94
96
Non-Temporal
High
57
56
69
75
75
NA
NA
158
153
Non-Temporal
Medium
42
50
60
69
95
NA
NA
181
176
Non-Temporal
Low
41
44
50
50
110
NA
NA
202
195
Coded
High
57
55
69
75
115
NA
NA
210
205
Coded
Medium
44
51
56
69
High
135
NA
NA
228
207
Candela
Coded
Low
40
46
52
50
150
NA
NA
246
220
Range
177
NA
NA
281
251
185
NA
NA
286
258
UL Max. Current Draw (mA RMS), 2-Wire Horn Strobe, Standard Candela Range (15–115 cd)
8–17.5 Volts
16–33 Volts
DC Input
15
15/75
15
15/75
30
75
95
110
115
Temporal High
137
147
79
90
107
176
194
212
218
Temporal Medium
132
144
69
80
97
157
182
201
210
Temporal Low
132
143
66
77
93
154
179
198
207
Non-Temporal High
141
152
91
100
116
176
201
221
229
Non-Temporal Medium
133
145
75
85
102
163
187
207
216
Non-Temporal Low
131
144
68
79
96
156
182
201
210
FWR Input
Temporal High
136
155
88
97
112
168
190
210
218
Temporal Medium
129
152
78
88
103
160
184
202
206
Temporal Low
129
151
76
86
101
160
184
194
201
Non-Temporal High
142
161
103
112
126
181
203
221
229
Non-Temporal Medium
134
155
85
95
110
166
189
208
216
Non-Temporal Low
132
154
80
90
105
161
184
202
211
UL Max. Current Draw (mA RMS), 2-Wire Horn Strobe, High Candela Range (135–185 cd)
16–33 Volts
DC Input
135
150
177
185
FWR Input
Temporal High
245
259
290
297
Temporal High
Temporal Medium
235
253
288
297
Temporal Medium
Temporal Low
232
251
282
292
Temporal Low
Non-Temporal High
255
270
303
309
Non-Temporal High
Non-Temporal Medium
242
259
293
299
Non-Temporal Medium
Non-Temporal Low
238
254
291
295
Non-Temporal Low
Candela Derating
177
258
250
248
275
262
256
185
265
258
256
281
267
262
Horn Tones and Sound Output Data
For K series products used at low temperatures, listed
candela ratings must be reduced in accordance with
this table.
Strobe Output (cd)
Listed Candela
15
15/75
30
75
95
110
115
135
150
177
185
16–33 Volts
135
150
215
231
209
224
207
221
233
248
219
232
214
229
Horn Strobe Output (dBA)
Switch
Position
1
2
3
4
Candela rating at –40°F
Do not use below 32°F
44
70
110
115
135
150
177
185
5
6
7
8†
9†
†
Sound
Pattern
Temporal
Temporal
Temporal
NonTemporal
NonTemporal
NonTemporal
Coded
Coded
Coded
8–17.5
Volts
dB
DC FWR
High
78 78
Medium 74 74
Low
71 73
High
82 82
Medium
16–33
Volts
DC FWR
84 84
80 80
76 76
24-Volt Nominal
Reverberant Anechoic
DC
FWR DC FWR
88
88
99 98
86
86
96 96
83
80
94 89
88
88
93
92
100 100
78
78
85
85
90
90
98
98
75
75
81
81
88
84
96
92
High
82
Medium 78
Low
75
82
78
75
88
85
81
88
85
81
93
90
88
92
90
85
101 101
97 98
96 92
Low
Settings 7, 8, and 9 are not available on 2-wire horn strobe.
†
AVDS11401
SpectrAlert Advance Diagrams
6.8˝
Dia.
2.5˝
2.5˝
Ceiling-Mount Horn Strobes
Ceiling Plastic Weatherproof Back Box
Ceiling-Mount Horn Strobe with Plastic Weatherproof Back Box
SpectrAlert Advance Ordering Information
Model
Ceiling Horn Strobes
PC2RK
PC2RHK
PC2WK
PC2WHK
Ceiling Strobes
SCRK
SCRHK
SCWK
SCWHK
Accessories
SA-WBBC
SA-WBBCW
MP120K
Description
2-Wire Horn Strobe, Standard cd, Red, Outdoor (includes plastic weatherproof back box)
2-Wire Horn Strobe, High cd, Red, Outdoor (includes plastic weatherproof back box)
2-Wire, Horn Strobe, Standard cd, White, Outdoor (includes plastic weatherproof back box)
2-Wire, Horn Strobe, High cd, White, Outdoor (includes plastic weatherproof back box)
Strobe, Standard cd, Red, Outdoor (includes plastic weatherproof back box)
Strobe, High cd, Red, Outdoor (includes plastic weatherproof back box)
Strobe, Standard cd, White, Outdoor (includes plastic weatherproof back box)
Strobe, High cd, White, Outdoor (includes plastic weatherproof back box)
Red, Metal Weatherproof Back Box
White, Metal Weatherproof Back Box
Notes:
“Standard cd” refers to strobes that include 15, 15/75, 30, 75, 95, 110, and 115 candela settings. “High cd” refers to strobes that include 135, 150, 177, and 185
candela settings. When replacing outdoor units, both the device and back box must be replaced.
3825 Ohio Avenue • St. Charles, IL 60174
Phone: 800-SENSOR2 • Fax: 630-377-6495
©2015 System Sensor.
Product specifications subject to change without notice. Visit systemsensor.com
for current product information, including the latest version of this data sheet.
AVDS11402 • 02/15