Audible Visible Accessories

Audible Visible
Accessories
System Sensor offers a wide range of Audible Visible (AV) accessories to enable you to meet a variety of application requirements.
Features
MP120K Mounting Plate
• Designed for both indoor and outdoor use
• Plug-in design eliminates ground faults
• Power supply that converts 120 VAC to nominal 24 V FWR
• Compatible with all two-wire SpectrAlert Advance® devices
Color Lens Attachments
• E
asily turns any device into a strobe for ECS/MNS events:
severe weather, toxic gases, sprinkler activation and more
• Outdoor rated from −35°F to 151°F
• Wall- or ceiling-mount lenses available
• UL 1638 listed
WTP Weatherproof Plates
• E
nables flush mounting of outdoor devices to brick, ceramic tile,
concrete, and masonry brick
• Weatherproof NEMA 3R rated
• For use in both indoor and outdoor applications
• F
or use with all K-R series (outdoor) products
replacement models
• Universal mounting plate easily attaches to the weatherproof plate
Agency Listings
S4011
S3593
7300-1653:0195
7300-1653:0204
7300-1653:0222
582-06-E
The MP120K Mounting Plate is designed to use 120 VAC to power
SpectrAlert Advance horns, strobes, horn strobes, chimes, and
chime strobes.
Color Lens Attachments install easily on any indoor or outdoor
SpectrAlert Advance strobe devices to provide distinctive visual
signaling.
WTP Series Weatherproof Plates enable installers to flush
mount outdoor horns, strobes, horn strobes, speakers, and speaker
strobes to a variety of wall surfaces, including brick, ceramic tile,
concrete, and masonry brick. These NEMA 3R-rated plates come
in red and white to suit aesthetic and functional requirements.
Compatible with our outdoor devices, which can be used in indoor
and outdoor environments, as required by conditions. They easily
attach to the SpectrAlert Advance universal mounting plate.
Trim Rings for speakers and speaker strobes allow for additional
space within the backbox. Trim ring for horns, strobes, and horn
strobes allow 4-wire devices to mount to a single-gang back box.
SpectrAlert Advance Outdoor Back Boxes ensure a NEMA 4X
weatherproof listing for AV devices. In locations where you have
a hard surface to mount to, Surface Mount Back boxes are the
best solution. If you have an exposed junction box, the Back Box
Skirts offer an attractive solution to mask the junction box exposure.
Retrofit Plates cover paint outlines on the wall when replacing
legacy SpectrAlert Advance products.
SpectrAlert Advance DECALS are for use on our non-pad
printed wall- and ceiling-mount devices. Each decal comes with
AGENT, EVAC, ALERT, or FIRE label options. The Sync•Circuit
Module synchronizes SpectrAlert Advance strobes at 1 Hz and
horns and chimes at temporal 3 over a single pair of wires. Patented
module technology also allows the silencing of horns or chimes on
horn strobe and chime strobe models over a pair of wires. See the
Sync•Circuit Datasheet for more information.
Specifications
MP120K
120 VAC mounting plate model MP120K shall be listed to UL 464 for fire protective signaling systems. The mounting plate shall power a
two-wire SpectrAlert® Advance horn, strobe, horn strobe, chime or chime strobe from a 120 VAC supply converted to nominal 24 V FWR. For
indoor applications, the mounting plate shall be installed in a 4x4x21/8 -inch junction box. For outdoor applications, the mounting plate shall be
installed using the proper SpectrAlert Advance outdoor weatherproof back box and outdoor listed notification appliance.
Compatibility
MP120K may be used with any of the following products at all horn and strobe settings: P2R, P2RH, P2RK, P2RHK, P2W, P2WH, SR, SRH,
SRK, SRHK, SW, SWH, PC2R, PC2RH, PC2RK, PC2RHK, PC2W, PC2WH, SCR, SCRH, SCRK, SCRHK, SCW, SCWH, HR, HRK, HW, P2RK-P,
P2RHK-P, P2WK-P, P2WHK-P, SRHK-P, SWK-P, SWHK-P, SR-P, SW-P, SRH-P, SWH-P, P2R-P, P2W-P, P2RH-P, P2WH-P, SCW-P, SCRH-P,
PC2R-P, PC2W-P, PC2WH-P, SR-SP, P2R-SP, CHR, CHW, CHSR, CHSW.
Physical/Operating Specifications
Standard Operating Temperature
–40°F to 151°F (–40°C to 66°C)
Humidity Range
10 to 93% non-condensing (indoor products)
Nominal Voltage
Regulated 120 VAC
Operating Voltage Range
96–132 VAC
Current Draw From AC Line
150 mA max.
WTP Weatherproof Plates
The SpectrAlert Advance weatherproof plate for horns, strobes, and horn strobes shall mount to 4x4x11/4-inch and 2x4x11/2-inch back boxes.
The weatherproof plate for speakers and speaker strobes shall mount to 4x4x21/8-inch back boxes. The weatherproof plate may be installed
on brick, concrete, ceramic tile, and masonry brick and must be used with System Sensor “K-R” series outdoor replacement models. Outdoor
SpectrAlert Advance products shall operate between -40°F and 151°F.
Physical Specifications
Speaker Strobe
7.25” L x 6.26” W x 3.00” D (including speaker and lens)
Speaker
7.25” L x 6.26” W x 1.30” D (including speaker)
Horn Strobe
6.90” L x 5.90” W x 2.80” D (including strobe lens)
Horn
6.90” L x 5.90” W x 1.60” D (including horn)
Note: WTP and WTPW are compatible with 4x4x1¼-inch and 2x4x1½-inch back boxes. (Compatible with outdoor horns, horn strobes and strobes)
WTP-SP and WTP-SPW are compatible with 4x4x21/8-inch back boxes. (Compatible with outdoor speakers and speaker strobes)
Models Available for Use with the Weatherproof Plates:
WTP
HRK-R, P2RK-R, P2RHK-R, P4RK-R, SRK-R
WTPW
P2WK-R, P2WHK-R, SWK-R, SWHK-R
WTP-SP
SPRK-R, SPSRK-R
WTP-SPW
SPWK-R, SPSWK-R
Note: K-R models ship without the outdoor back box. The weatherproof mounting plates are designed to be used only with K-R
replacement models.
Specifications
Colored Lens Attachments
The System Sensor SpectrAlert Advance colored lens attachments shall be approved for fire protective service as listed in UL 1638. The lens
attachments shall only be used with plain (no “FIRE” print) System Sensor strobe devices. The lens shall mount to any wall- or ceiling-mount
strobes and shall be rated from −35°F to 151°F.
Compatibility
Colored lens attachments may be used with the following System Sensor plain (non-FIRE-printed) indoor or outdoor strobe models: SR-P,
SRH-P, SW-P, SWH-P, P2R-P, P2W-P, P2WH-P, P4R-P, P4W-P, P2RK-P, P2RHK-P, SCW-P, PC2R-P, PC2W-P, PC2WH-P, SPSW-P, SPSR-P,
SPSWH-P, SPSRH-P, SPSRV-P, SPSCW-P, SPSCWH-P, SPSCWV-P, SPSCWVH-P, SPSCWHK-P, SRK-P, SRHK-P, SWK-P, SWHK-P, P2WK-P,
P2WHK-P, SPSWK-P, SPSRK-P, SW-CLR-ALERT, SCW-CLR-ALERT, SPSCW-CLRALERT, SEP-SW-P, SEP-SPSW-P.
Colored Lens Installation
Installation to Wall-Mount Strobe
Installation to Ceiling-Mount Strobe
Candela Rating for UL 1638
Light output of color lenses is measured per UL 1638, on axis, and is not derated.
Strobe Output (cd)
Candela Switch Setting
15
15/75*
30
75
95
110
115
135
150
177
185
On-Axis Candela Rating (UL1638) – All Colors
15
NA
30
75
95
110
115
135
150
177
185
*15/75 Candela setting not to be used with color lenses
Ordering Information (continued)
Part No.
Description
Metal Weatherproof Backboxes
Part No.
Description
Colored Lenses
MWBBW
LENS-B
Wall-mount, blue
LENS-R
Wall-mount, red
LENS-G
Wall-mount, green
LENS-A
Wall-mount, amber
LENS-BC
Ceiling-mount, blue
LENS-RC
Ceiling-mount, red
LENS-GC
Ceiling-mount, green
LENS-AC
Ceiling-mount, amber
MWBB
MWBBCW
SA-WBBW
SA-WBB
white, wall-mount, compatible with: SPWK-R,
SPWK, SPSWK-R, SPSWK-P, SPSWK,
SPSWK-CLR-ALERT
red, wall-mount, compatible with: SPRK-R,
SPRK, SPSRHK, SPSRK-P, SPSRK, SPSRK-R
white, ceiling-mount, compatible with: SPCWK,
SPSCWK,SPCWK-R, SPSCWK-R, SPSCWHK,
SPSCWHK-R
white, wall-mount, compatible with: P2WK,
P2WHK, P2WHK-P, P2WK-P, SWK, SWK-R, SWK-P,
P2WHK-R, P2WK-R, SWHK, SWHK-P, P4WK
red, wall-mount, compatible with: P2RK,
P2RK-P, P2RK-R, SRK, SRK-P, SRK-R P2RHK,
P4RK, P4RHK, SRHK, HRK, P2RHK-R, P2RK-R,
HRK-R, P4RHK-R, P4RK-R
Decals
DECAL-R
red letters, used for non-pad-printed wall-mount
devices. (10 total decals per box for 5 devices)*
DECAL-RC
red letters, used for non-pad-printed ceilingmount devices. (15 total decals per box for
5 devices)*
SA-WBBC
red, ceiling-mount, compatible with: SCRK,
SCRHK, PC2RK, PC2RHK
DECAL-W
SA-WBBCW
white, ceiling-mount, compatible with: PC2WK,
PC2WHK, PC4WK, SCWK, SCWHK
white letters, used for non-pad-printed wall-mount
devices. (10 total decals per box) for 5 devices*
DECAL-WC
white letters, used for non-pad-printed ceilingmount devices. (15 total decals per box for
5 devices)*
Surface Mount Back Box
SBBR
red, wall-mount, compatible with: HR, CHR, SR,
SR-SP, SRH, P2R, P2R-SP, P2RH, P4R, P4RH,
CHSR, P2R-P, SR-P, SRH-P
*All Decals include Labels: “AGENT, EVAC, ALERT & FIRE”
SBBW
white, wall-mount, compatible with:HW, CHW, SW,
SWH, P2W, P2WH, P4W, P4W-P, CHSW, P2W-P,
P2WH-P, SW-P, SWH-P, SW-ALERT, SWH-ALERT
RFPW
9.5" x 7" white
RFP
9.5" x 7" red
Retrofit Plates
(For use with horn strobe & speaker strobe devices)
SBBSPR
red, wall-mount, compatible with: SPR, SPRV,
SPSR, SPSRH, SPSRV, SPSR-P, SPSRH-P, SPSRV-P
SBBSPW
white, wall-mount, compatible with: SPW, SPWV,
SPSW, SPSWH, SPSWV, SPSW-P, SPSWH-P,
SPSW-ALERT, SPSW-CLR-ALERT
MP120K
red, ceiling-mount compatible with: SCR, SCRH,
PC2R, PC2RH, PC4R, PC4RH, SPCR, SPCRV,
SPSCR, SPSCRH, SPSCRV, SPSCRVH, PC2R-P
MDL3W
white, 12/24 volt Sync-Circuit module.
MDL3R
red, 12/24 volt Sync-Circuit module
SBBCR
SBBCW
white, ceiling-mount, compatible with:
SCW, SCWH, PC2W, PC2W-SP, PC2WH,
PC4W, SPCW, SPCWV, SPSCW, SPSCWH,
SPSCWV, SPSCWVH, PC2W-P, PC2WH-P,
SCW-P, SPSCW-P, SPSCWH-P, SPSCWHK-P,
SPSCWV-P, SPSCWVH-P, SPSCW-CLR-ALERT,
SCW-CLR-ALERT
Back Box Skirts
BBS-SP201W
Surface-mount back-box skirt for the PF24V
(ExitPoint™ Directional Sounder with Voice
Messaging)
SEP-BBSW
Surface mount back box skirt for strobe only
Expander Plate
SPSEP-BBSW
Surface mount back box skirt for speaker strobe
Expander Plate
Mounting Plate
120 VAC Adapter Mounting Plate
Sync Modules
Trim Rings
TR
red, wall-mount for use with speaker devices
TRC
red, ceiling-mount for use with speaker devices
TRCW
white, ceiling-mount for use with speaker devices
TR-HS
red, wall-mount for use with horn strobes devices
TRW
white, wall-mount for use with speaker devices
Weatherproof Plates
WTPW
white, for use with horn, strobes & horn strobe devices
WTP
red, for use with horn, strobes & horn strobe devices
WTP-SPW
white, for use with speaker devices
WTP-SP
red, for use with speaker devices
3825 Ohio Avenue • St. Charles, IL 60174
Phone: 800-SENSOR2 • Fax: 630-377-6495
www.systemsensor.com
©2015 System Sensor.
Product specifications subject to change without notice. Visit systemsensor.com
for current product information, including the latest version of this data sheet.
AVDS4004 • 03/15