Features Description ● ● ● ● ● ● ● ● ● ● 2:1 Wide Input Voltage Range 30 Watts Output Power 1.6kVDC Isolation UL Certified Fixed Operating Frequency Six-Sided Continuous Shield International Safety Standard Approvals Standard 50.8 x40.6x10.2mm Package Efficiency to 90 % Available as Power Module (RPM30-E) The RP30-E series DC/DC converters are certified to UL 60950-1 and cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2” x 1.6” package meets military standards for thermal shock and vibration tolerance. POWERLINE DC/DC-Converter with 3 year Warranty 30 Watt Single & Dual Output Selection Guide 12V, 24V and 48V Input Types Input (4) Efficiency (5) Capacitive (6) Current Load max. mA % Part Number Input Range VDC Output Voltage VDC Output Current mA RP30-123.3SE 9-18 3.3 6000 2037 85 19500µF RP30-1205SE 9-18 5 6000 3012 87 10200µF RP30-1212SE 9-18 12 2500 2976 88 3240µF RP30-1215SE 9-18 15 2000 2976 88 1100µF RP30-243.3SE 18-36 3.3 6000 1031 86 19500µF RP30-2405SE 18-36 5 6000 1490 88 10200µF RP30-2412SE 18-36 12 2500 1470 89 3300µF RP30-2415SE 18-36 15 2000 1470 89 1100µF RP30-483.3SE 36-75 3.3 6000 500 87 19500µF RP30-4805SE 36-75 5 6000 740 89 10200µF RP30-4812SE 36-75 12 2500 730 90 3300µF RP30-4815SE 36-75 15 2000 730 90 1100µF RP30-1212DE 9-18 ±12 ±1250 3012 87 ±1020µF RP30-1215DE 9-18 ±15 ±1000 3012 87 ±675µF RP30-2412DE 18-36 ±12 ±1250 1488 88 ±1020µF RP30-2415DE 18-36 ±15 ±1000 1488 88 ±675µF 125 RP30-4812DE 36-75 ±12 ±1250 744 88 ±1020µF 100 RP30-4815DE 36-75 ±15 ±1000 744 88 ±675µF 75 UL-60950-1 Certified E196683 RP30-E Derating-Graph (Ambient Temperature) Output Power (%) * no suffix for CTRL function with Positive Logic (1=ON, 0=OFF), this is standard * add suffix -HC for premounted heatsink and clips RoHS 2011/65/EU 6/6 50 RP30-4805SE Natural Convection 25 0 -40 -25 -10 0 50 60 70 Ambient Temperature Range (°C) Ordering Examples RP30-2405SE = 24V Input, 5V Output, Positive Logic CTRL pin. 80 90 100 62°C RP30-4805SE With Heat Sink 125 RP20-4812DE-HC = 48V Input, ±12V Output, Positive Logic CTRL pin, Heatsink fitted 100 Output Power (%) 75 Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical support service at [email protected] www.recom-power.com REV: 0/2015 50 Natural Convection 25 0 -40 -25 -10 0 50 60 70 Ambient Temperature Range (°C) 80 90 100 71°C Refer to Application Notes P-63 RP30-S_DE Series POWERLINE DC/DC-Converter Typical Characteristics RP30-4805SE RP30-4805SE Efficiency VS Output Load Efficiency VS Input Voltage 92 90 89 88 87 86 85 84 80 78 76 74 Efficiency (%) Efficiency (%) 93 92 91 90 89 88 87 86 85 84 83 82 36 40 45 50 55 60 65 70 75 1 2 3 4 5 6 Output Load (A) Intput Voltage (V) Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range 9-18VDC 24V nominal input 18-36VDC 48V nominal input 36-75VDC 12V input RP30-E Under Voltage Lockout 12V nominal input 24V input 48V input Input Filter DC-DC ON 9VDC DC-DC OFF 8VDC DC-DC ON 17.8VDC DC-DC OFF 16VDC DC-DC ON 36VDC DC-DC OFF 33VDC (1) L-C Type Input Voltage Variation dv/dt (Complies with ETS300 132 part 4.4) Input Surge Voltage (100 ms max.) 12V Input 36VDC 24V Input 50VDC 48V Input 100VDC Input Reflected Ripple (nominal Vin and full load) (3) 30mAp-p Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (7) Remote OFF input current 5V/ms max 25ms typ. DC-DC ON Open or 3.0V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V Nominal input Output Power 2.5mA 30W max. Output Voltage Accuracy (full Load and nominal Vin) ±1% Voltage Adjustability ±10% Minimum Load Single & Dual 0% Line Regulation (low line, high line at full load) Single ±0.2% Dual ±0.5% continued on next page P-64 REV: 0/2015 www.recom-power.com RP30-S_DE Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Load Regulation (25% to 100% full load) Cross Regulation (Asymmetrical 25% <> 100% load) Single ±0.5% Dual ±1% Dual ±5% Ripple and Noise (20MHz bandwidth, with 1µF MLCC on output) Single 3.3, 5V 50mVp-p (Measured with a 1004pF/50V MLCC) Single 12, 15V 75mVp-p Dual 5, 12, 15V 100mVp-p Temperature Coefficient ±0.02%/°C max. Transient Response (25% load step change) 300µs Over Voltage Protection 3.3V 3.9V Zener diode clamp (only single) 5V 6.2V 12V 15V 15V 18V Over Load Protection (% of full load at nominal Vin) 150% typ Undervoltage Lockout See Application Notes Short Circuit Protection Hiccup, automatic recovery Efficiency see „Selection Guide“ table Isolation Voltage (rated for one minute) 1600VDC Isolation Resistance 1 GΩ min. Isolation Capacitance 1000pF max. Operating Frequency 300kHz typ. Approved to Safety Standards UL 1950, EN60950 Operating Temperature Range -40°C to +85°C(with derating) +100°C Storage Temperature Range -55°C to +125°C Over Temperature Protection 115°C typ. Thermal Impedance (8) Natural convection Natural convection with Heat Sink Thermal Shock 10°C/Watt 8.24°C/Watt MIL-STD-810D Vibration 10-55Hz, 10G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel plated copper Base Material Non-conductive black plastic Potting Material Epoxy (UL94-V0) Weight 48g Packing Quantity Refer to App Notes for tube dimensions Dimensions Conducted Emissions Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity 5 pcs per Tube 50.8 x 40.6 x 10.2mm (9) EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 1535 x 103 hours MTBF (2) www.recom-power.com Class A Class A Perf. Criteria B Perf. Criteria B Perf. Criteria B Perf. Criteria B Perf. Criteria B REV: 0/2015 P-65 RP30-E Maximum Case Temperature RP30-S_DE Series POWERLINE DC/DC-Converter Notes : 1. An external filter capacitor is required for normal operation. The capacitor should be capable of handling 1A ripple current for 48V/24V models. RECOM suggest: Nippon chemi-con KY series, 220µF/100V, ESR 90m Ω. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. The ON/OFF control pin voltage is referenced to negative input 8. Heat sink is optional and P/N: 7G-0011-C. Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips (add suffix -HC). See Application Notes for heatsink details. 9. See application notes for Class B common mode filter suggestion. Package Style and Pinning (mm) 50.80 40.60 10.20 5.6 dia. 1.0 RP30-E Pin Connections Pin # 1 2 4 5 6 7 8 45.70 5 17.80 Bottom View 5.10 15.20 1 10.20 12.70 Single +Vin -Vin CTRL No Pin +Vout -Vout Trim Dual +Vin -Vin CTRL +Vout Com -Vout Trim Pin Pitch Tolerance ±0.35 mm 6 2 7 4 10.20 17.80 8 External Output Trimming Output can be externally trimmed by using the method shown below. ( ) for dual output trim. See Application Notes for details. 7(7) Trim Up 8(8) RD RU 8(8) Trim Down 6(5) The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. P-66 REV: 0/2015 www.recom-power.com