Features Description ● ● ● ● ● ● ● ● ● ● Ultraminiature 25.4 x25.4x9.9mm Package 15 Watts Output Power Single or Dual Outputs Wide 4:1 Input Voltage Range 1.6kVDC Isolation Fixed Operating Frequency Six-Sided Continuous Shield Industry Standard Pinout Remote On/Off and Trim pins Efficiency to 87 % The RP15-SAW series are ultraminiature wide input voltage range power DC/DC converters in a case half the size of industry standard 15W converters. Despite their small size, the RP15-SAW converters are fully specified devices with output currents up to 4 Amps, no minimum load, 1600VDC isolation and low ripple/noise figures. The outputs are also fully protected against short circuits, overcurrent and overvoltage. The RP15-SAW series will find many uses in applications where board space and/or board height is at a premium. POWERLINE DC/DC-Converter with 3 year Warranty 15 Watt Single & Dual Output Selection Guide 24V and 48V Input Types Input (1) Efficiency (2) Capacitive (3) Current Load max. mA % Input Range VDC Output Voltage VDC Output Current mA RP15-243.3SAW** 9-36 3.3 4000 45/688 86 12000µF RP15-2405SAW** 9-36 5 3000 70/762 86 6000µF RP15-2412SAW** 9-36 12 1300 20/783 87 1000µF RP15-2415SAW** 9-36 15 1000 20/753 87 660µF RP15-483.3SAW** 18-75 3.3 4000 25/336 86 12000µF RP15-4805SAW** 18-75 5 3000 35/382 87 6000µF RP15-4812SAW** 18-75 12 1300 12/392 87 1000µF RP15-4815SAW** 18-75 15 1000 12/377 87 660µF RP15-2405DAW** 9-36 ±5 ±1500 20/772 85 ±3000µF RP15-2412DAW** 9-36 ±12 ±625 20/753 87 ±520µF Derating-Graph RP15-2415DAW** 9-36 ±15 ±500 20/744 88 ±330µF (Ambient Temperature) RP15-4805DAW** 18-75 ±5 ±1500 12/386 85 ±3000µF RP15-4812DAW** 18-75 ±12 ±625 15/382 86 RoHS 2011/65/EU 6/6 UL-60950-1 Certified E196683 RP15-AW RP15-4805SAW 125 ±520µF RP15-4815DAW** 18-75 ±15 ±500 20/377 87 ±330µF ** Standard part is without suffixes and Trim and CTRL pins are not fitted. * add suffix /P for CTRL function with positive logic (1=ON, 0=OFF) including trim pin for single output * add suffix /N for CTRL function with negative logic (0=ON, 1=OFF) including trim pin for single output * add suffix -HC for premounted heatsink and clips 100 75 Output Power (%) Part Number 50 Natural Convection 25 0 -40 -25 -10 0 A bi t T Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical support service at [email protected] www.recom-power.com REV: 0/2015 50 R 60 (°C) 70 80 90 100 RP15-4805SAW With Heat Sink 125 100 75 Output Power (%) Ordering Examples RP15-2405SAW/P = 24V 4:1 Input, 5V Output, Positive Logic CTRL pin and Trim pin fitted. RP15-4805DAW-HC = 48V 4:1 Input, ±5V Output, Premounted Heatsink RP15-483.3DAW/N = 48V 4:1 Input, ±5V Output, Negative Logic CTRL pin (no trim pin with dual output) t 50 Natural Convection 25 0 -40 -25 -10 0 50 60 70 80 90 100 Ambient Temperature Range (°C) 66 Refer to Application Notes P-37 RP15-S_DAW Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range 24V nominal input 9-36VDC 48V nominal input 18-75VDC Input Filter Pi Type Input Surge Voltage (100 ms max.) Input Reflected Ripple (nominal Vin and full load) 24V Input 50VDC 48V Input 100VDC (4) 30mAp-p Start Up Time (nominal Vin and constant resistor load) Optional Remote ON/OFF (5) 30ms max. DC-DC ON Short or 0V < Vr < 1.2V (Negative logic) DC-DC OFF Open or 3.0V < Vr < 15V Remote Pin drive current Nominal Vin -0.5mA~1.0mA Remote OFF input current Nominal Vin 2.5mA typ. Output Voltage Accuracy (full Load and nominal Vin) Optional Output Trim ±1% (5) ±10% Minimum Load 0% Line Regulation (low line, high line at full load) Load Regulation (0% to full load) Single ±0.2% Dual ±0.5% Single ±0.2% Dual ±1% Cross Regulation (Asymmetrical 25% <> 100% load) Dual Output ±5% Ripple and Noise (20MHz bandwidth, with 1µF MLCC on output) Single 3.3, 5V Outputs 75mVp-p Others 100mVp-p RP15-AW Dual Temperature Coefficient 100mVp-p ±0.02%/°C max. Transient Response (25% load step change) 250µs Over Voltage Protection 3.3V 3.7-5.4V Zener diode clamp (only single) 5V 5.4-7.0V 12V 13.5-19.6V 15V 16.8-20.5V Over Load Protection (% of full load at nominal Vin) 150% typ Undervoltage Lockout See Application Notes Short Circuit Protection Hiccup, automatic recovery Efficiency see „Selection Guide“ table Isolation Voltage (rated for one minute) 1600VDC Isolation Resistance 1 GΩ min. Isolation Capacitance 1000pF max.Operating Frequency 400kHz typ Operating Temperature Range -40°C to +85°C(with derating) Maximum Case Temperature +105°C Storage Temperature Range -55°C to +125°C Thermal Impedance (6) Natural convection 18.2°C/Watt Natural convection with Heat Sink 15.8°C/Watt Thermal Shock MIL-STD-810F continued on next page P-38 REV: 0/2015 www.recom-power.com RP15-S_DAW Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Vibration 10-55Hz, 10G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel plated copper Base Material FR4 PCB Potting Material Conducted Emissions Epoxy (UL94-V0) (7) EN55022 Class A Radiated Emissions EN55022 ESD EN61000-4-2 Perf. Criteria A Radiated Immunity EN61000-4-3 Perf. Criteria A Fast Transient EN61000-4-4 Perf. Criteria A Surge (8) Conducted Immunity Class A EN61000-4-5 Perf. Criteria A EN61000-4-6 Perf. Criteria A Weight 15g Packing Quantity Refer to App Notes for tube dimensions 8 pcs per Tube Dimensions MTBF 25.4 x 25.4 x 9.9mm (9) Bellcore TR-NWT-000332 1330 x 103 hours MIL-HDBK 217F 1459 x 103 hours Notes : 6. 7. 8. 9. RP15-AW 1. 2. 3. 4. 5. Values at nominal input voltage and no load/full load. Typical Value at nominal input voltage and full load. Test by minimum Vin and constant resistor load. Simulated source impedance of 12µH. 12µH inductor in series with +Vin. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input. Positive logic ON/OFF is marked with suffix-P (eg. RP15-2405SAW/P) Negative logic ON/OFF is marked with suffix-N (eg. RP15-2405SAW/N). If no suffix is specified, the control pin will be omitted. Optional Heat-sink P/N is 7G-0047-C. Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips (add suffix -HC). See Application Notes for heatsink details. Meets Class A with external input capacitors shown below. Will meet Class B with external common mode filter (see Application Notes) Requires external capacitor to meet EN61000-4-5: 220µF/100V, low ESR (48mOhm) BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C. MIL-HDBK 217F Notice 2. Ta = 25°C, full load, (Ground Benign, controlled environment). External Output Trimming (optional) Trim Up 4 5 REV: 0/2015 Trim Down RD RU With /CTRL suffix, output can be externally trimmed by using the method shown here. See Application Notes for details. www.recom-power.com 6 5 P-39 RP15-S_DAW Series POWERLINE DC/DC-Converter RP15-4805SAW RP15-4805SAW Efficiency VS Input Voltage Efficiency VS Output load 90 88 86 84 82 80 78 76 74 72 70 18 24 30 36 42 48 54 60 66 72 Efficiency (%) Efficiency (%) Typical Characteristics 90 85 80 75 70 65 60 55 50 45 40 0 25 75 50 100 Output Load (%) Input Voltage (V) Package Style and Pinning (mm) 25.40 Pin Connections 25.40 9.9 5.60 RP15-AW 1.0 dia 20.32 Pin # Single 1 2 3 4 5 6 +Vin -Vin no pin +Vout no pin -Vout Single/ P or /N +Vin -Vin CTRL +Vout Trim -Vout Dual +Vin -Vin no pin +Vout Com -Vout Dual/ P or /N +Vin -Vin CTRL +Vout Com -Vout Case Tolerance ±0.5 mm Pin Pitch Tolerance ±0.25 mm 2.54 20.32 4 4 6 Bottom View Standard 1 20.32 2 5.08 10.16 5 2.54 6 2.54 Bottom View /CTRL Option 2 1 1.60ø+0.15/0 2.54 10.16 2.54 3 5.08 2.54 Top View Footprint Details EMC Filtering - For Class B filter suggestion, see Application Notes Class A Filter Vin=24V: C1=6.8µF/50V 1812 MLCC, C2 omitted. Vin=48V: C1, C2 = 2.2µF/100V 1812 MLCC Fuse Input + + C1 C2 Output The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. P-40 REV: 0/2015 www.recom-power.com