● ● ● ● ● ● ● ● Features Regulated Converters Description 4:1 Wide Input Voltage Range 12 Watts Regulated Output Power 1.6kVDC Isolation Over Current and Over Voltage Protection Five-Sided Shield No Derating to 61°C Standard DIP24 Pinning Efficiency to 88 % POWERLINE DC/DC-Converter with 3 year Warranty 12 Watt DIP24 & SMD, Single & Dual Output The RP12-AW series wide range input DC/DC converters are certified to UL 60950-1 and cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The DIP24 package is available in both pinned and SMD case styles and meets military standards for thermal shock and vibration tolerance. Selection Guide 24V and 48V Wide Input Types Part Number Input (4,5) Efficiency (6) Capacitive (7) Current Load max. mA % Input Range VDC Output Voltage VDC Output Current mA RP12-243.3SAW** 9-36 3.3 3500 55/602 84 2000µF RP12-2405SAW** 9-36 5.1 2400 55/614 87 2000µF RP12-2412SAW** 9-36 12 1000 25/610 86 430µF RP12-2415SAW** 9-36 15 800 25/610 86 300µF RP12-483.3SAW** 18-75 3.3 3500 20/301 84 2000µF RP12-4805SAW** 18-75 5.1 2400 20/307 87 2000µF RP12-4812SAW** 18-75 12 1000 13/302 87 430µF RP12-4815SAW** 18-75 15 800 13/298 88 300µF RP12-2405DAW** 9-36 ±5 ±1200 20/625 84 ±1250µF RP12-2412DAW** 9-36 ±12 ±500 25/610 86 ±200µF RP12-2415DAW** 9-36 ±15 ±400 25/610 86 ±120µF RP12-4805DAW** 18-75 ±5 ±1200 10/309 85 ±1250µF RP12-4812DAW** 18-75 ±12 ±500 13/301 87 ±200µF RP12-4815DAW** 18-75 ±15 ±400 13/301 87 ±120µF DIP24 (SMD) RoHS 2011/65/EU 6/6 UL-60950-1 Certified E196683 RP12-AW Derating-Graph (Ambient Temperature) ** add Suffix SMD for SMD package RP12-4805SAW 125 100 Output Power (%) 75 50 75Vin Natural Convection Nom Vin 25 0 -40 -25 -10 0 50 60 70 80 90 100 110 Ambient Temperature Range (°C) 65 Derating graphs are valid only for the shown part numbers. If you need detailed derating information about a part-number not shown here, please contact our technical support service at: [email protected] Refer to Application Notes P-22 REV: 0/2015 www.recom-power.com RP12-S_DAW Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range 24V nominal input 9-36VDC 48V nominal input 18-75VDC Input Filter Pi Type Input Surge Voltage (100ms max) 50VDC (24V Type), 100VDC (48V Type) Input Reflected Ripple (nominal Vin and full load) 20mAp-p Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (1 ) Remote OFF input current 450ms typ. DC-DC ON Open or 3.0V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V Nominal input 2.5mA Output Power 12W max. Output Voltage Accuracy (full Load and nominal Vin) ±1.2% Minimum Load 0% Line Regulation (low line, high line at full load) ±0.2% Load Regulation (0% to 100% load) ±0.5% Single, ±0.5% Cross Regulation Dual Ouput (asymmetric 25% <>100% Load ) ±5% Ripple and Noise (20MHz bandwidth, with 1µF MLCC on output) 85mVp-p Temperature Coefficient ±0.02%/°C max. Transient Response (25% load step change) Input Voltage Variation, dv/dt 250µs complies with ETS300 132, part 4.4 Over Load Protection (% of full load at nominal Vin) 5V/ms 150% typ Overvoltage Protection (Single) Zener Diode Clamp See Application Notes Short Circuit Protection Continuous, automatic recovery Efficiency see „Selection Guide“ table Isolation Voltage (rated for one minute) In to Out and I/O to case 1600VDC Isolation Resistance 10 GΩ min. Isolation Capacitance 1500pF max. Operating Frequency 400kHz typ. Operating Temperature Range (No derating) 5.1, 12, 15, ±12, ±15V -40°C to +65°C 3.3, ±5V -40°C to +61°C Maximum Case Temperature +105°C Storage Temperature Range -55°C to +125°C Thermal Impedance Natural convection Case Material 20°C/Watt Nickel plated copper with non-conductive plastic base Potting Material Epoxy (UL94-V0) Weight 18g (DIP), 20g (SMD) Packing Quantity Refer to App Notes for tube dimensions Conducted Emissions (3) Radiated Emissions (3) EN55022 EN55022 7pcs per Tube Class A Class A ESD EN61000-4-2 Perf. Criteria B Radiated Immunity EN61000-4-3 Perf. Criteria A Fast Transient EN61000-4-4 Perf. Criteria B continued on next page www.recom-power.com REV: 0/2015 P-23 RP12-AW Undervoltage Protection RP12-S_DAW Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Surge EN61000-4-5 Pref. Critera B Conducted Immunity EN61000-4-6 Pref. Critera A Thermal Shock MIL-STD-810D Vibration 10-55Hz, 10G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH MTMF (2) 2350 x 103 hours Bellcore-TR-NWT-000332 Notes : 1. 2. 3. 4. 5. 6. 7. The ON/OFF control pin voltage is referenced to negative input. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). Requires external filter to meet EN55022 Class A Typical value at nominal input voltage and no load. Maximum value at nominal input voltage and full load Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistor load. Package Style and Pinning (mm) DIP24 Package Style 31.80 20.30 10.20 3.8 RP12-AW 2 5.10 20.30 2.54 Pin Connections 15.20 Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin NC = No Connection 0.5 dia. 1 2 3 9 11 16 14 Bottom View 23 22 Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin Pin Pitch Tolerance ±0.35 mm SMD Package Style and Pinning (mm) (Same spec. as the original DIP sepc. and pin definition, excl. of the SMD Typ pin.) 32.00 20.30 31.40 11.20 2.54 10.90 3.81 6.35 Pin area 0.1 x 0.50 21.30 Pin Connections 25.40 Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin Others NC NC = No Connection 2.54 0.50 1.60 2.40 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.54 24.14 24 23 22 21 20 16 15 14 13 Top View 1 Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin NC Pin Pitch Tolerance ±0.35 mm 27.94 11 x 2.54 The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. P-24 REV: 0/2015 www.recom-power.com