Features Description ● ● ● ● ● ● ● ● ● 4:1 Wide Input Voltage Range 30 Watts Output Power 1.6kVDC Isolation UL Certified Fixed Operating Frequency Six-Sided Continuous Shield Standard 50.8 x40.6x10.2mm Package Efficiency to 88 % Available as Power Module (RPM30-EW) The RP30-EW series wide input range DC/DC converters are certified to UL 60950-1 and to cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2” x 1.6” package meets military standards for thermal shock and vibration tolerance. POWERLINE DC/DC-Converter with 3 year Warranty 30 Watt Single & Dual Output Selection Guide 24V and 48V Input Types Input Range VDC Output Voltage VDC Output Current mA Input (4) Current mA Efficiency (5) Capacitive (6) Load max. % RP30-243.3SEW 10-40 3.3 6000 994 87 19500µF RP30-2405SEW 10-40 5 6000 1506 87 10200µF RP30-2412SEW 10-40 12 2500 1506 87 3300µF RP30-2415SEW 10-40 15 2000 1488 88 1100µF RP30-483.3SEW 18-75 3.3 6000 497 87 19500µF RP30-4805SEW 18-75 5 6000 744 88 10200µF RP30-4812SEW 18-75 12 2500 753 87 3300µF RP30-4815SEW 18-75 15 2000 744 88 1100µF RP30-2412DEW 10-40 ±12 ±1250 1563 84 ±1000µF RP30-2415DEW 10-40 ±15 ±1000 1543 86 ±680µF RP30-4812DEW 18-75 ±12 ±1250 772 85 ±1000µF RP30-4815DEW 18-75 ±15 ±1000 762 86 ±680µF * no suffix for CTRL function with Positive Logic (1=ON, 0=OFF), this is standard * add /N for CTRL function with Negative Logic (0=ON, 1=OFF) * add suffix -HC for premounted heatsink and clips Ordering Examples RP30-2405SEW = 24V Input, 5V Output, Positive Logic CTRL pin. RP20-4812DEW/N-HC = 48V Input, ±12V Output, Negative Logic CTRL pin, Heatsink fitted RoHS 2011/65/EU 6/6 UL-60950-1 Certified E196683 RP30-EW Derating-Graph (Ambient Temperature) 125 RP30-2412SEW 100 75 Output Power (%) Part Number 50 Natural Convection 25 0 -40 -25 -10 0 50 60 70 Ambient Temperature Range (°C) 80 90 100 55°C RP30-2412SEW With Heat Sink 125 100 Output Power (%) 75 Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical support service at [email protected] www.recom-power.com REV: 0/2015 50 Natural Convection 25 0 -40 -25 -10 0 50 60 70 Ambient Temperature Range (°C) 80 90 100 64°C Refer to Application Notes P-67 RP30-S_DEW Series POWERLINE DC/DC-Converter Typical Characteristics RP30-483.3SEW RP30-483.3SEW Efficiency VS Output Load 88 87 86 85 84 83 82 81 80 79 78 Efficiency (%) Efficiency (%) Efficiency VS Input Voltage 10 15 20 25 30 35 40 87 86 85 84 83 82 81 80 75 70 65 1 2 3 4 5 6 Intput Voltage (V) Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range Under Voltage Lockout 24V nominal input 10-40VDC 48V nominal input 18-75VDC 24V input RP30-EW 48V input Input Filter DC-DC ON 10VDC DC-DC OFF 8VDC DC-DC ON 18VDC DC-DC OFF 16VDC (1) L-C Type Input Voltage Variation dv/dt (Complies with ETS300 132 part 4.4) Input Surge Voltage (100 ms max.) 24V Input 50VDC 48V Input 100VDC Input Reflected Ripple (nominal Vin and full load) (3) 20mAp-p Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (7) Remote OFF input current 10ms typ. DC-DC ON Open or 3.0V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V Nominal input Output Power 3mA 30W max. Output Voltage Accuracy (full Load and nominal Vin) ±1% Voltage Adjustability ±10% Minimum Load Single Dual Line Regulation (low line, high line at full load) Load Regulation (25% to 100% full load) 5V/ms max (9) Cross Regulation (Asymmetrical 25% <> 100% load) 0% 10% of full load ±0.5% Single ±0.5% Dual ±1% Dual ±5% continued on next page P-68 REV: 0/2015 www.recom-power.com RP30-S_DEW Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Ripple and Noise (20MHz bandwidth, with 1µF MLCC on output) Single 3.3V 60mVp-p (Measured with a 100nF/50V MLCC) Single 5V 75mVp-p Single 12, 15V 100mVp-p Dual 12, 15V 100mVp-p Temperature Coefficient ±0.02%/°C max. Transient Response (25% load step change) 250µs Over Voltage Protection 3.3V 3.9V Zener diode clamp 5V 6.2V 12V 15V 15V 18V Over Load Protection (% of full load at nominal Vin) 150% max. Undervoltage Lockout See Application Notes Short Circuit Protection Hiccup, automatic recovery Efficiency see „Selection Guide“ table Isolation Voltage (rated for one minute) 1600VDC Isolation Resistance 1 GΩ min. Isolation Capacitance 1000pF max. Operating Frequency 300kHz typ. Approved to Safety Standards EN60950 Operating Temperature Range -40°C to +85°C(with derating) +100°C Storage Temperature Range -55°C to +125°C Over Temperature Protection 115°C typ. Thermal Impedance (8) Natural convection Natural convection with Heat Sink Thermal Shock 10°C/Watt 8.24°C/Watt MIL-STD-810F Vibration 10-55Hz, 10G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel plated copper Base Material Non-conductive black plastic Potting Material Epoxy (UL94-V0) Weight 48g Packing Quantity Refer to App Notes for tube dimensions Dimensions Conducted Emissions 5 pcs per Tube 50.8 x 40.6 x 10.2mm (10) Radiated Emissions EN55022 Class A EN55022 Class A ESD EN61000-4-2 Perf. Criteria B Radiated Immunity EN61000-4-3 Perf. Criteria A Fast Transient EN61000-4-4 Perf. Criteria B Surge EN61000-4-5 Perf. Criteria B EN61000-4-6 Perf. Criteria A Conducted Immunity MTBF 1315 x 103 hours (2) www.recom-power.com REV: 0/2015 P-69 RP30-EW Maximum Case Temperature RP30-S_DEW Series POWERLINE DC/DC-Converter Notes : 1. An external filter capacitor is required for normal operation. The capacitor should be capable of handling 1A ripple current for 48V/24V models. RECOM suggest: Nippon chemi-con KY series, 220µF/100V, ESR 90m Ω. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input. Positive logic ON/OFF is standard, no suffix (Ex. RP30-2405SEW) Negative logic ON/OFF is marked with suffix-N (Ex. RP30-2405SEW/N). 8. Heat sink is optional and P/N: 7G-0011-C. Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips (add suffix -HC). See Application Notes for heatsink details. 9. The dual output required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 10.See application notes for class B common mode filter suggestion. Package Style and Pinning (mm) 50.80 40.60 10.20 5.6 dia. 1.0 RP30-EW Pin Connections Pin # 1 2 4 5 6 7 8 45.70 5 17.80 Bottom View 5.10 15.20 1 10.20 Single +Vin -Vin CTRL No Pin +Vout -Vout Trim Dual +Vin -Vin CTRL +Vout Com -Vout Trim Pin Pitch Tolerance ±0.35 mm 12.70 6 2 7 4 10.20 17.80 8 External Output Trimming Output can be externally trimmed by using the method shown below. ( ) for dual output trim. See Application Notes for details. 7(7) Trim Up 8(8) RD RU 8(8) Trim Down 6(5) The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. P-70 REV: 0/2015 www.recom-power.com