Gateway to SIXTRAK I/O Select an ET-GT-ST-1 when… …you need a large number of I/O or a special SIXTRAK I/O type in an EtherTRAK I/O station n Connect 1024 I/O to a single Ethernet port n Choose from over 24 I/O module types n Supports the Modbus TCP/IP open standard n Low-cost SIXTRAK Ethernet gateway n RS232 port for laptop or modem link n Windows software ready (OPC, DDE, DLL ...) Performance Specifications Maximum SIXTRAK I/O modules Maximum modules w/o expanders Maximum I/O (any mix) per gateway Ethernet port Protocols Supported Ethernet isolation Incoming supply voltage Power consumption (less modules) Operating temperature range Storage temperature range Humidity (non-condensing) 128 20 (See note) 1024 10BaseT at 10Mbps TCP/IP and UDP with Modbus and SIXNET protocol 1200VRMS 1 minute 18-30 VDC 1.6 watts -30 to 70 °C -40 to 85 °C 5 to 95% Note: An ST-EX-001-20U I/O expander is required to address more than 20 I/O modules. Click here for details. Additional EtherTRAK I/O modules All other Ethernet computers and devices Ethernet network RS232 to laptop or modem POWER STATUS ACT LINK ET-GT-ST Ethernet I/O Expander SIXTRAK Gateway EtherTRAK I/O Expander Create large Ethernet I/O stations that seamlessly integrate into your real-time open systems. Ordering Information Description EtherTRAK gateway to SIXTRAK I/O I/O expander (more than 20 modules) SIXTRAK I/O modules SIXNET • Box 767 • Part Number ET-GT-ST-1 ST-EX-001-20U See selection guide Clifton Park, NY 12065 USA • +1 (518) 877-5173 Additional SIXTRAK I/O modules • FAX +1 (518) 877-8346 • [email protected]