SixTRAK I/O ® CONTROLLER

PRODUCT DATASHEET
ST-GT-1210
SixTRAK I/O ® CONTROLLER
Industrial I/O Controller for Ethernet I/O, RS485 I/O, or Modbus I/O
PRODUCT HIGHLIGHTS
 Process Control, SCADA, and RTU functionality
 IEC 61131-3 programming with all five languages
supported datalogging and peer-to-peer I/O transfers
 Ethernet, RS232, RS485 and local I/O Expansion
 Supports more than 40 Sixnet I/O modules Types
 Interface to other vendor's Modbus I/O
 Flexible communication
 Supports open Modbus/TCP, ASCII and RTU
 Supports telephone, wireless and other links


Compact DIN-rail industrial package
Zone 2 UL, CSA, CE and DNV rated

-30 to +70oC operating temperature range
PERFORMANCE SPECIFICATIONS

32-bit CPU

16 Meg flash and 16 Meg dynamic RAM

512K battery-backed static RAM

Up to 50,000 I/O registers

Configuration and diagnostics from Sixnet I/O Toolkit
software

Datalogging support - Sixnet Sixlog

IEC 61131 programming - Sixnet ISaGRAF
SixTRAK I/O (ST-BUS) PORT
 Up to 20 modules (640 I/O)
 SixTRAK I/O Specs - see individual data sheets
 ST-BUS Specs - see user manual for details
ENVIRONMENTAL
 DIN rail or flat panel mount
 Power - 10-30 VDC; 3 watts typ. (less modules)
 Temperature -30 to +70oC (-40 to +85oC storage)
 Humidity 5% to 95% RH (non-condensing)
 Electrical safety UL508, CSA C22.2/14; EN61010-1
 EMI emissions FCC part 15, ICES-003, Class A;
EN55022; EN61326-1; CE
 EMC immunity EN61326-1 (EN61000-4-2,3,4,6); CE
 Surge withstand IEEE-472 (ANSI C37.90)
 Vibration IEC68-2-6
 UL1604, CSA C22.2/213, Cenelec EN50021 Zone 2
 Marine/offshore tested and/or verified to meet various
marine and maritime standards
All specifications are subject to change. Consult factory for latest info.
MECHANICAL DRAWING
ETHERNET PORT
 10/100 BaseTx auto-sensing
 Connection - RJ45 (TD,RD,CTS,RTS,CD,DTR,DSR,GND)
 Isolation - 1200 VRMS 1 minute
 Protocols - Modbus and Sixnet over TCP or UDP
SERIAL PORTS
 Up to 115,200 baud
 RS232 port RJ45 (TD,RD,CTS,RTS,CD,DTR,DSR,GND)
 RS485 port Screws (485+, 485-, GND) 2-wire half-duplex
 RS485 network - up to 32 (full-load) stations
 RS485 distance - up to 0.5 miles (1km)
 Flow control - hardware, software, half/full-duplex modem
 Protocols - Modbus RTU, Modbus ASCII, and Sixnet
 Modes - master, slave and passthru
ORDERING INFORMATION
ST-GT-1210
Sixnet Technology Park
331 Ushers Road • Ballston Lake, NY 12019 • USA
1.518.877.5173 • Fax 1.518.877.8346 • [email protected]
SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES
SixTRAK I/O Controller
Datasheet ST-GT-1210
Rev. April 15, 2009
WWW.SIXNET.COM