PRODUCT DATASHEET ET-16DO2 EtherTRAKTM DISCRETE OUTPUTS Select the ET-16DO2 when you need to control relays, solenoids, valves and other outputs over an Ethernet network. PRODUCT HIGHLIGHTS High density outputs save space Isolation protects the Ethernet network Time proportioned outputs for variable control Surge suppressors safely clamp inductive loads PERFORMANCE SPECIFICATIONS 16 output channels Output range 10 - 30 VDC Max. output current per channel 1 Amp Max. output current (entire module) 8 Amps Max. OFF state leakage current 0.05 mA Min. load current per channel 0.1 mA Inrush current (100 mS surge) 5 Amps Typical ON resistance 0.3 Ohms Typical ON voltage (@ 1 Amp) 0.3 VDC Time proportioned outputs1 configurable for each channel Fastest scan rate (16 channels) 2 mS Required supply voltage 10-30 VDC (0.75 watt typical) Operating temperature range -30 to 70° C Storage temperature range -40 to 85° C Humidity (non-condensing) 5 to 95% RS485 PORT FOR I/O EXPANSION 1 32 Max. RS485 stations (up to 512 I/O) Baud rate: 38,400 bps Recommended distance of up to 0.5 mile Protocol: Sixnet “I/O for Windows”, Modbus ASCII & RTU Isolation (from Ethernet port) 1200 Volts RMS 1 minute Time proportioned outputs control the duty cycle of the output in proportion to an analog output register value. The cycle time and minimum pulse time are configurable. ORDERING INFORMATION ET-16DO2-H 16 outputs with wiring base ET-16DO2-M Replacement module only All specifications are subject to change. Consult factory for latest info. Sixnet Technology Park • 331 Ushers Road • Ballston Lake, NY 12019 USA 1.518.877.5173 • Fax 1.518.877.8346 • [email protected] SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES 2006 DATASHEET ET-16DO2 2-MAR-09 WWW.SIXNET.COM