PRODUCT DATASHEET EB-PD-xxx-1 INDUSTRIAL POWER OVER ETHERNET (PoE) SPLITTER Power non-PoE or non-Ethernet Devices from your PoE Lines. These space saving industrial PoE splitters give you all the benefits of Power over Ethernet (PoE) without needing to upgrade your existing non-PoE Ethernet devices. These splitters generate isolated 24 VDC power for your non-PoE or even non-Ethernet devices. Think of this splitter as an industrial 24 VDC power supply that is powered by your incoming PoE (Etherbus) cable. The Ethernet output can be connected to any traditional (non-PoE) Ethernet device. These industrial splitters are ultra-rugged, reliable and easy to use. PRODUCT HIGHLIGHTS One IEEE 802.3af compliant Power over Ethernet (PoE) port One Ethernet output port where the 48 VDC has been removed Plug & play saves you time and money Truly industrial rated for any application Industrial PoE Splitter Power Input: PoE (48 VDC) Power Output: 24 VDC @13 watts IEEE 802.3af COMPLIANT PoE INPORT PORTS Powered Device (PD) operation Accepts power over signal or unused pairs Supports power detection & classification TRUE ISOLATED POWER 24 VDC power output (12/14V also available) 13 watts of power available TRUE PLUG AND PLAY SIMPLICITY No user settings Ready to use right out of the box TROUBLE FREE OPERATION Ultra-reliable 1,000,000+ hours MTBF Slim package for DIN rail or panel mounting SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES 14 VDC Output Special Order WWW.SIXNET.COM INDUSTRIAL POWER OVER ETHERNET (PoE) SPLITTER SPECIFICATIONS GENERAL EB-PD-xxx-1 PHYSICAL Ethernet protocols supported: All IEEE 802.3 DIN rail or direct panel mounting Ethernet ports: 2 (1 for PoE in, 1 for Ethernet out) Packaging - Polycarbonate with IP30 protection Ethernet port standards: 10/100BaseTX IEEE 802.3 / 802.3u Weight (approximate): 0.17 Kg (0.25 lbs) Dimensions - 4 x 1 x 3.3” (10 x 2.5 x 8.3 cm) MTBF (estimated): >1,000,000 hours PoE INPUT Fully IEEE 802.3af compliant IEEE 802.3af PoE operation: Powered Device (PD) PoE power input:Automatic detection and classification All specifications are subject to change. Consult factory for latest info. MECHANICAL DRAWING (power is accepted on either the signal or unused pairs) PoE protection: Over/under voltage lockout and inrush control PoE transient protection: 15,000 watts peak PoE spike protection: 5,000 watts (10 times for 10 uS) POWER OUTPUT Isolated power Voltage output: 24 VDC, 0.54 Amps (24V model) 14 VDC, 0.93 Amps (UPS model) (special) POWER WIRING Power output: 13 watts ENVIRONMENTAL Operating temperature range: -40 to +75°C (cold startup @ -40°C) Storage temperature range: -40 to +85 °C Humidity (non-condensing) 5 to 95% RH Vibration, shock and freefall: IEC68-2-6, -27 and -32 ORDERING GUIDE STANDARDS COMPLIANCE Electrical safety:UL508/CSA C22.2/14; EN61010-1, CE EMI emissions: FCC part 15, ICES-003; EN61000-6-4, CE EMC immunity: IEC61000-6-2, CE Hazardous locations: UL1604, CSA C22.2/213 (Class I, Div. 2); EN60079-15 (Zone 2; Category 3), CE (ATEX) EB-PD-24V-1 PoE splitter to power non-PoE or non-Ethernet 24 VDC dvices EB-PD-UPS-1 PoE splitter for non-PoE 12/14 VDC devices and/ or to charge a 12 VDC battery for UPS backup (special) ACCESSORIES EB-5ES-PSE-# 5 port Industrial Ethernet switch with 4 PoE ports EB-PSE-24V-1A PoE injector for 1 PoE port (uses unused pairs), 24V input EB-PSE-48V-1A PoE injector for 2 PoE port (uses unused pairs), 48V input Sixnet Technology Park 331 Ushers Road • Ballston Lake, NY 12019 • USA 1.518.877.5173 • Fax 1.518.877.8346 • [email protected] SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES Datasheet EB-PD-xxx-1 Rev: June 10, 2009 WWW.SIXNET.COM