PRODUCT DATASHEET SLX-8ES-6/7 THREE FIBER INDUSTRIAL ETHERNET UNMANAGED SWITCH The SLX-8ES-6/7 is an 8 port industrial Ethernet unmanaged switch featuring 3 noise-immune Fiber optic ports. This ruggedized switch is industrial hardened to provide superior reliability for long term operation. They require no user setup and immediately start operating as soon as you power them up. PRODUCT HIGHLIGHTS Three 100 Mbps fiber optic ports for noise immune links up to 120 km n Slim packaging fits on your DIN rail n High performance and value n Truly industrial hardened design n Dual power inputs keeps you running n Plug & play saves you time and money n REAL-TIME OPERATION Intelligent routing - No collisions! n Ideal for any 10/100 Ethernet system n FIVE 10/100 RJ45 AND THREE FAST ETHERNET FIBER OPTIC PORTS PLUG AND PLAY SIMPLICITY Auto-sensing for speed and duplex n Auto-mdi/mdix-crossover and auto-polarity n TROUBLE FREE OPERATION Ultra-reliable 1,000,000+ hours MTBF n -40 to +85°C operating range n UL, CSA (CUL), CE and Hazloc (Zone 2) rated n Dual power inputs with spike/surge protection n Rugged corrosion-resistant aluminum case n DIN rail or direct panel mounting in multiple positions – No accessories required! n SIXNET KNOWS INDUSTRIAL – We have been designing industrial hardware such as Remote Terminal Units for over 30 years and have used this expertise to design the toughest Ethernet switches on the market. Don’t trust your critical communications to so-called industrial hardware from commercial switch manufacturers. SIXNET switches give you proven assurance that your system will keep running for years to come. SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES WWW.SIXNET.COM SLX-8ES-6/7 8 PORT INDUSTRIAL ETHERNET UNMANAGED SWITCH ETHERNET PERFORMANCE STANDARD COMPLAINCE n Unmanaged with 8 Ethernet ports n Electrical safety - UL508/CSA C22.2/14, EN61010-1, CE n Ethernet switch type: Intelligent store and n EMC - FCC part 15, ICES-003, EN55022, EN61000-6, CE forward wire speed n Hazardous locations: UL1604/CSA C22.2/213 (Class I, Div. 2); n Ethernet protocols supported: All IEEE 802.3 EN60079-15 (Zone 2, Category 3), CE (ATEX) n RJ45 ports (shielded): 10/100BaseTX n Maritime rated for marine & offshore per ABS n RJ45 speed (10 or 100 Mbps): Auto-negotiation n Eye safety (fiber models) - IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11 n RJ45 MDI/MDIX and TD/RD: Auto-crossover and auto-polarity PHYSICAL n Fiber optic port speed: 100BaseFX (100 Mbps) n DIN rail or direct panel mounting n Fiber optic port wavelength: 1300 nm center n Packaging: Aluminum with IP30 protection n n Weight: 11 oz. (0.31kg) Fiber multimode (mm) typical: 50 or 62.5/125 um (SC or ST) n Fiber singlemode (sm) typical: 9 or 10/125 um (SC or ST) n Dimensions – see mechanical diagram n Fiber max. distance (full duplex) (see web for details) 4 km (mm), 20 (sm) or 40 km (long haul) or more All specifications are subject to change. Consult factory for latest info. (contact SIXNET) MECHANICAL DRAWING n See separate datasheet for complete fiber transceiver details. 3.82" n Typical latency for 100M ports [9.70 cm] p 5 us + frame time p Varies on load Removable Snaps to n Typical latency for 10M ports Screw Block standard p 16 us + frame time DIN Rail SC Fiber p Varies on load EN50022 or (35 mm) ST Fiber n Fiber duplex operation: Full duplex 4.70" 5.20" n MAC addresses supported: 1024 Removable DIN clip for [11.94 cm] [13.21 cm] n Memory bandwidth: 3.2 Gbps direct panel mounting n Ethernet isolation: 1500 VRMS 1 minute ETHERNET COMPLIANCE n IEEE 802.3 (10Mbps Ethernet supports legacy devices) n IEEE 802.3u (Fast Ethernet 100Mbps for newer devices) n IEEE 802.3x (Full-Duplex with Flow Control) POWER INPUT n Redundant input terminals n Input power consumption: 8.0 W (typical w/ all ports active) n Power input voltage: 10-30 VDC p Transient protection: 15,000 watts peak p Spike Protection: 5,000 watts (10 times for 10 uS) ENVIRONMENTAL n Operating temperature range p -40 to +85 °C p cold startup @ -40°C n Storage temperature range:-40 to +85 °C n Humidity (non-condensing): p 5 to 95% RH p Conformal coating is available – contact SIXNET n Vibration: IEC68-2-6 Panel mounting ears accept up to a #12 screw on newer models Console Port(s) 4.21" [10.70 cm] 1.60" [4.07 cm] See the User Manual for a More Detailed Diagram ORDERING GUIDE SLX-9ES-### See separate datasheets for unmanaged slim line models with only 1 fiber optic port SLX-8ES-6SC SLX-8ES-6ST Unmanaged with 5 RJ45 ports & 3 multimode fiber optic port with SC or ST style connector SLX-8ES-7SC SLX-8ES-7ST Unmanaged with 5RJ45 ports & 3 singlemode fiber optic port with SC or ST style connector Special, mixed or long haul (up to 120km) fiber transceivers are available for special order. Contact Sixnet for details. ACCESSORIES: ET-PS-024-02 Industrial power supply – AC to 24VDC, 2A, with compact packaging, DIN rail mount SP-ETH-2 Dual port surge & lightning protector SIXNET Technology Park 331 Ushers Road • Ballston Lake, NY 12019 • USA 1.518.877.5173 • Fax 1.518.877.8346 • [email protected] SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES Datasheet SLX-8ES-6/7 Rev: 12 JUNE 2009 WWW.SIXNET.COM