PRODUCT DATASHEET EB-PS-x INDUSTRIAL 48 VDC POWER SUPPLIES These Sixnet industrial power supplies are designed to meet or exceed the requirements of the industrial devices they power. They are ideal for any industrial application where consistent performance and long term reliability are a must. PRODUCT HIGHLIGHTS n AC input up to 264 VAC at 50/60 Hz n DC input up to 370 VDC n 48 VDC output up to 120 Watts (2.5 Amps) n Fully protected from short circuit, over-load, over-voltage and over-temperature conditions n DIN rail mounting standard n Wide operating temperature range n Certified to perform EB-PS-AC48-75 75 Watts for up to 5 full power PoE devices AC Input 48 VDC Output SEVERAL MODELS TO CHOOSE FROM n EB-PS-AC48-75 (75 Watts) p Output: 48 VDC @ 1.5 Amps (75 watts) p Universal AC input from 85 – 264 VAC p Compact size – fits in small enclosures p Ideal to power up to 5 PoE devices n EB-PS-AC48-120 120 Watts for up to 8 full power PoE devices AC Input 48 VDC Output EB-PS-AC48-120 (120 Watts) p Output: 48 VDC @ 2.5 Amps (120 Watts) p Selectable AC input up to 264 VAC Compact size - high power to size ratio p p Ideal to power up to 8 PoE devices n EB-PS-4824-13 (13 Watts) p Ultra-compact DC-DC converter p Ideal for 48 VDC (PoE) systems requiring some 24 VDC p Output: 24 VDC @ 540 mA (13 Watts) p Input: 45-56 VDC (48 VDC nominal) p Slim packaging fits on any DIN rail EB-PS-4824-13 48VDC Input 24 VDC Output 13 Watts ORDERING GUIDE EB-PS-AC48-75 AC to 48 VDC power supply; 75 Watts (1.5 Amp) EB-PS-AC48-120 AC to 48 VDC power supply; 120 Watts (2.5 Amps) EB-PS-4824-13 48 VDC to 24 VDC power supply; 13 Watts (0.540 Amps) SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES WWW.SIXNET.COM INDUSTRIAL 48 VDC POWER SUPPLIES SPECIFICATIONS MODEL DC Voltage 24VDC 48VDC 48VDC 1.6Amps 2.5Amps Current Range 0 - 0.54Amps 0 - 1.6Amps 0 - 2.5Amps OUTPUT Ripple/Noise (max) Voltage Adjust 13 Watts 76.8 Watts 120 Watts 200 mV p-p 240 mV p-p 100 mVp-p - 48-53 VDC +/- 1% +/- 1% Line Regulation N/A +/- 0.5% Load Regulation N/A +/- 1% Voltage Tolerance Setup & Rise Time - 1000mS & 60mS @ 230V 500mS & 70mS @230V Hold Time (typical) - 12/60mS @ 115/230 VAC 32/36mS @ 115/230 VAC AC Voltage Range N/A 85 - 264 VAC 88 - 133, 176-264 VAC DC Voltage Range 45 - 56 VDC 120 - 370 VDC 248 - 370 VDC Frequency Range N/A Efficiency (typical) 85% 81% 85% 0.32Amps @ 48VDC 1.6Amps @115VAC, 0.96Amp @ 230VAC 2.6Amps @115VAC, 1.6Amps @ 230VAC Current (typical) - Leakage Current - PROTECTION Inrush Current ENVIRONMENTAL INPUT EB-PS-AC48-120 0.54Amps Over-load Operation Temp. STANDARDS EB-PS-AC48-75 Rated Current Rated Power Over-voltage Over-temp. Opearation Humidity 47 - 63 Hz Cold start - 20Amps @ 115VAC, 40Amps @ 230 VAC <1mA @ 240VAC <3.5mA @ 240VAC Current limiting w/automatic recovery 105 - 150% rated output, current limiting w/automatic recovery Transient: 15Kw peak; Surge: 5Kwatts (10x10uS) 58 - 65 VDC shut down output, cycle power to recover 140oC w/auto recovery 90oC shurt down w/auto recovery -40 to +75oC -20 to +70oC (derate ouput 3% per oC above 50oC) 5 to 95% RH (non-cond.) 20 to 90% RH (non-cond.) -40 to +85oC -40 to +85oC @ 10 to 95% RH - +/-0.03% per oC Vibration, shock and freefall IEC 68-2-6, -27 and -32 10 - 500Hz; 2G 10 min per cycle; 60m period each along X, Y, Z axes Safety UL508 / CSA C22 (CUL), EN61010-1 CUL (UL508 / CSA C22.2); TUV EN60950-1 Haz. Locations UL1604, CSA C22.2/213, Cenelec EN50021 - Withstand Volt. Input to output: 1500Vrms Input to output: 3KVAC; Input to GND: 1.5KVAC; Output to GND: 0.5KVAC Storage Temperature Coefficient Isolation Resistance - 100M Ohms @ 500VDC EMI Emissions FCC part 15, ICES-003, E55022 EN55011, EN55022 (CISPR22) Class B EMC Immunitiy IEC61326-1 EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV5024; EN50024; EN61000-62 (50082-2); heavy industry level, critera A N/A EN61000-3-2, EN61000-3-3 Harmonic Current MISCELLANEOUS EB-PS-4824-13 EB-PS-x MTBF >1,000,000 (estimated) 123,000 hrs per MIL-HDBK-217 @25oC Packaging Polycarbonate; IP30 Metal; IP20 Mounting DIN rail or flat to panel DIN rail Weight 0.17Kg (0.25lbs) Dims 0.60Kg (1.3lbs) 137,000 hrs per MILHDBK-217 @25oC 0.79Kg (1.7lbs) See mechanical drawings All specifications are subject to change. Consult factory for latest info. SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES WWW.SIXNET.COM INDUSTRIAL 48 VDC POWER SUPPLIES MECHANICAL DRAWINGS EB-PS-x EB-PS-4824-13 POWER WIRING OUTPUT DERATING Sixnet Technology Park 331 Ushers Road • Ballston Lake, NY 12019 • USA 1.518.877.5173 • Fax 1.518.877.8346 • [email protected] SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES Datasheet EB-PS-xx Rev April 10, 2014 WWW.SIXNET.COM