PRODUCT DATASHEET EB-PSE-24V-1 EB-PSE-48V-2 Industrial Power over Ethernet (PoE) Injectors Pass Power & Data to your Ethernet Field Devices over the same Cable. The EB-PSE-24V-1 or EB-PSE-48V-2 industrial PoE power injectors add 48 VDC power into 1 or 2 Ethernet ports so that you can pass power and data over the same wire to your Ethernet devices in the field. The 24V-1 model steps up your 24 VDC for sourcing 1 PoE port so no separate DC/ DC converter is required. The 48V-2 model is two injectors in one to save space and money. Both are ultra-rugged, reliable and easy to use. PRODUCT HIGHLIGHTS n Simplify System Wiring n Reduce Maintenance Time n Save Money n Fully IEEE 802.3af compliant PSE (Power Sourcing Equipment) operation n Model 1 directly runs off of your existing 24 VDC and powers 1 PoE (48 VDC) port n Model 2 saves you space and money by powering 2 PoE (48 VDC) ports n Industrial rated for -40 to 75°C operation EB-PSE-24V-1 IEEE 802.3af compliant PoE ports n Power Sourcing Equipment (PSE) operation n Auto-detection of PD (powered devices) n Supplies up to 15.4 watts per channel n Over-temperature and over-current detection n Over and under-voltage protection True plug and play simplicity n No user settings n Ready to use right out of the box EB-PSE-48V-2 trouble free operation n Ultra-reliable 1,000,000+ hours MTBF n Slim package for DIN rail or panel mounting solutions for your industrial networking challenges www.sixnet.com EB-PSE-Injectors Industrial Power over Ethernet (PoE) Injectors specifications General n Ethernet protocols supported: All IEEE 802.3 n Ethernet connectors per channel: 2 (1 for Ethernet in, 1 for PoE out) n Ethernet port standards: 10/100BaseTX IEEE 802.3 / 802.3u PoE Output n Fully IEEE 802.3af compliant n IEEE 802.3af PoE operation: Power Sourcing Equipment (PSE) n PoE power output p48 VDC @ 15.4 Watts per channel p24V model: Derate 1W per 2°C over 60°C n RJ45 PoE pin assignments pA=unused pair: TX(3,6); RX(1,2); V-(7,8); V+(4,5) pB=signal pair: TX/V- (3, 6); RX/V+ (1, 2) n PoE operation: Auto-detection & power management nPoE disconnect mode: AC for 24V-1 and DC for 48V-2 nPoE protection: Over-temp, over-current, over/ under-voltage & transient POWER INPUT n Fully IEEE 802.3af PoE compliant n Power input for 48V-2 models: 45-56 VDC @ 31 Watts max. n Power input for 24V-1 models: 18-30 VDC @ 20 Watts max. n Transient protection 15,000 watts peak n Spike protection 5,000 watts (10 times for 10 uS) ENVIRONMENTAL n Operating temperature range: -40 to +75°C (cold startup @ -40°C) p 24V model: Derate 1W per 2°C over 60°C n Storage temperature range: -40 to +85 °C n Humidity (non-condensing) 5 to 95% RH n Vibration, shock and freefall: IEC68-2-6, -27 and -32 STANDARDS COMPLIANCE n Electrical safety:UL508/CSA C22.2/14; EN61010-1, CE n E M I e m i s s i o n s : F C C p a r t 1 5 , I C E S - 0 0 3 ; EN61000-6-4, CE n EMC immunity: IEC61000-6-2, CE nHazardous locations: UL1604, CSA C22.2/213 (Class I, Div. 2); EN60079-15 (Zone 2; Category 3), CE (ATEX) PHYSICAL n DIN rail or direct panel mounting n Packaging - Lexan with IP30 protection n Weight (approximate): 0.17 Kg (0.25 lbs) n Dimensions - 4 x 1 x 3.3” (10 x 2.5 x 8.3 cm) n MTBF (estimated): >1,000,000 hours MECHANICAL DRAWING Removable Screw Block EB-PSE-24V-1 2.90" [7.35 cm] Snaps to standard DIN rail EN50022 (35 mm) 1.01" [2.57 cm] 4.20" [10.67 cm] 3.95" [10.03 cm] Dia. 0.15" (0.38 cm) Use for direct panel mounting to a flat surface 1.98" [5.02 cm] 1.01" [2.57 cm] 3.26" [8.28 cm] 1.00" [2.54 cm] 1.98" [5.02 cm] 0.06" [0.15 cm] EB-PSE-48V-2 POWER WIRING eB-Pse-24V dual dc Power eB-Pse-24V single dc Power P2 P1 P2 P1 + + + - + + chassis gnd (panel) one dc supply (18 - 30 Vdc) + - + - two dc supplies (18 - 30 Vdc) chassis gnd (panel) eB-Pse-48V dc Power input + + - chassis gnd (panel) dc supply (45 - 56 Vdc) All specifications are subject to change. Consult factory for latest info. ORDERING GUIDE EB-PSE-24V-1A PoE injector for 1 PoE port (uses unused pairs), 24V input EB-PSE-48V-2A PoE injector for 2 PoE port (uses unused pairs), 48V input EB-PSE-24V-1B Special order: uses signal pairs for PoE, ideal for 4 wire cables EB-PSE-48V-2B Special order: uses signal pairs for PoE, ideal for 4 wire cables ACCESSORIES EB-PS-AC48-75 Industrial power supply, AC to 48 VDC, 75W, 1.5A EB-PS-AC48-120 Industrial power supply, AC to 48 VDC, 120W, 2.5A EB-PD-24V-1 PoE splitter for 24VDC devices, 13W (Other voltages available – special order) Sixnet Technology Park 331 Ushers Road • Ballston Lake, NY 12019 • USA 1.518.877.5173 • Fax 1.518.877.8346 • [email protected] solutions for your industrial networking challenges Datasheet EB-PSE-XXV Rev: June 25, 2010 www.sixnet.com