Options Selection Guide

OPTIONS SELECTION GUIDE
DC/DC CONVERTERS AND
AC/DC POWER SUPPLIES
Option E
FE
L
N
T
VLK
PIN CONNECTIONS FOR OUR MOST
REQUESTED OPTIONS
W
Pin
B ............................................................................................•
Outputs
1
AC in
B5..........• ........................• ............• ......................................•
J ..........• ................................................................................•
K ..........• ....................................................• ........................•
K2..........• ................................................................................•
L ..........• ................................................................................•
M ..........• ................................................................................•
N ..........• ....................................................• ........................•
T ..........• ............• ..........• ............• ......................................•
UK ........• ....................................................• ........................•
OF THE OPTIONS LIST-
8 screw terminal strip in lieu of pins. See diagram for
electrical and mechanical information.
B
B5 5 screw terminal strip in lieu of pins. See diagram for
electrical and mechanical information.
J
Faraday shielding
K
AC input, 200 to 252VAC at 50 to 440Hz
K2 AC input 105 to 125VAC and 200 to 252VAC at 50 to
440Hz.
See diagram for electrical and mechanical information.
(Strappable)
L
Banana jacks, toggle switch, and line cord
Option BK2
(AC Input)
110 Volts In / Single
AC in
2
Shield (if used)
Connect to terminal #1
3
AC in
Connect to terminal #4
4
N/C
AC in
5
N/C
N/C
6
+ Vout
+ Vout
7
N/C
Common**
8
Common
- Vout
Dual Output
P ..........• ................................................................................•
DESCRIPTIONS
ED ABOVE:
Option B
(AC Input)
Single Output
220 Volts In
1
AC in
AC in
2
Shield (if used)
Connect to terminal #3
3
AC in
Connect to terminal #2
4
N/C
AC in
5
N/C
N/C
6
+ Vout
+ Vout
7
Common
Common**
8
- Vout
- Vout
Option T
Triple Output
N/A on E Series
1
AC in
2
Shield (if used)
3
AC in
4
+ 5 VDC
5
5 VDC return
6
+ Vout
7
Common
8
- Vout
M 2.2” spacing on AC input pins
N
AC input, 90 to 110VAC, at 50 to 440Hz
P
AC in line cord
T
5 screw terminal strip in lieu of pins. See diagram for
electrical and mechanical information. When specifying the
T option, allow for increase in case height to next higher
increment. Example: W15S500, 1.55”H case W15S500T,
2.0”H case
UK AC input, 216 to 265VAC, at 50 to 440Hz
Note: Not all options available on every unit. Case sizes may
change depending on options chosen.
134
Pin
Option T
(AC Input)
Option B5
(AC Input)
Single Output
Single Output
1
AC in
AC in
2
AC in
AC in
3
+ Vout
+ Vout
4
N/C
N/C
5
Common
Common
603-778-2300
www.wallindustries.com
OPTIONS SELECTION GUIDE
Options B and
CUSTOMIZATIONS
Option B5
AVAIL-
ABLE UPON REQUEST:
•
•
•
•
•
•
•
•
•
•
•
•
•
Pin
Option T
(AC Input)
Dual Output
Option B5
(AC Input)
Dual Output
1
AC in
AC in
2
AC in
AC in
3
+Vout
+Vout
4
Common
Common
5
- Vout
- Vout
+ DC in
2
- DC in
- DC in
3
+ Vout
+ Vout
4
N/C
N/C
5
Common
- Vout
Over voltage temperature shutdown
3.3 V
Option
(DC Input) Single Output(DC Input) Single Output
1
Output voltage trim
Custom pin configurations
Threaded mounting inserts
3.3 Volt (and lower) outputs available
Other voltages and currents
Chassis-mountable configurations
Flying leads
Extended temperature range
Additional input and output filtering
High voltage outputs
Remote sense
Remote on/off
+ DC in
•
3.3 Volt Outputs available for production
quantities on most all of our DC/DC
converters.
(DC Input) Dual Output (DC Input) Dual Output
1
+DC in
+ DC in
2
- DC in
-DC in
3
+Vout
+ Vout
4
Common
Common
5
- Vout
-Vout
•
Consult factory for more details.
** Common not used on single output modules.
Wall Industries, Inc.
603-778-2300
135