NOTES: UNLESS OTHERWISE SPECIFIED B REVISED PER ER11418 BY APPD DATE DAO DESCRIPTION DAO 01/07/08 1.FOR GENERAL SERIES SPECIFICATIONS SEE 74-0000 REV 2. MATERIAL SPECIFICATIONS: BODY: BRASS PER ASTM B16 3. FINISH SPECIFICATIONS: BODY: .000010 MIN. GOLD PER SAE-AMS2422 OVER .000080 MIN. NICKEL PER SAE-AMS-QQ-N-290 .068 1.71 4. ELECTRICAL SPECIFICATIONS: CURRENT RATING: 30 AMPS 5. SUGGESTED FOR USE WITH 12 GA WIRE. .109 2.77 6.REFER TO CAP10-01 FRO CABLE ASSEMBLY PROCEDURE. .105±.003 2.67±.08 .280 7.11 .135 3.43 .218 5.54 FLATS .069 1.75 .144 3.66 .275 6.99 .250 6.35 STRIPPING LENGTH CATALOG No: 01369 .095 2.41 MAX STRIP WIRE VIEW PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX ± .01 [0.3] .XXX ± .005 [0.13] .XXXX ± .XXXX ANGLES: ± 2° SCALE: 4:1 Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER DRAWING DRAWN CWB APPROVED LMD DATE APPROVED 12/13/05 WPM DATE APPROVED 12/14/05 TMC RIGHT ANGLE, SOLDER DATE 02/16/06 DATE 02/16/06 LOW PROFILE MALE A SD01369 SHT 1 OF 1 REV B