Series DS 3A to 220 Vdc SIP Package DC Control Part Number Description DS6R3E 3A, 60 Vdc DS22R1E 1A, 220 Vdc Part Number Explanation DS 6 R 3 E FEATURES/BENEFITS • Industry standard package • Surge tolerant • Compact size NOTES 1) Line Voltage (nominal): 6 = 60 Vdc; 22 = 220 Vdc 2) Switch Type: R = Random turn-on 2) Control Range: E = 3-30 Vdc MECHANICAL SPECIFICATION ±0.01 ±.02 .39 (10.2) 1.70 (43.2) APPLICATIONS • Programmable logic controllers • Instrumentation • Test equipment • Solenoid drivers ±0.01 .98 (25.4) 4–3+ 2– 1+ ±.02 .19 (6.5) .30 (7.63) .49 ±.001 .40 ±.001 (12.7) (10.16) .20 ±.001 (5.08) WEIGHT: 0.7 oz. (20g) DESCRIPTION The DS 3-amp solid-state single inline package (SIP) four-pin relays are designed for mounting on printed circuit boards. The relays are designed for mediumpower DC loads. The Series DS relay is an alternative to electromechanical and reed relays. Ø1 .30 (7.62) TOLERANCES: ±0.1 Figure 1 – DS relays; dimensions in inches (mm) INPUT (CONTROL) SPECIFICATION Min Max Control Range 3 30 Vdc Input Current Range 1 30 mADC Must Turn-Off Voltage Input Resistance (Typical) Units 1 Vdc 1000 Ohms TYPICAL APPLICATION + 1+ 2– BLOCK DIAGRAM +3 (*) Load 1+ 2– –4 (*) On inductive loads Figure 2 – DS relays © 2003 TELEDYNE RELAYS - Figure 3 – DS relays (800) 284-7007 • www.teledynerelays.com DS 1 DS\032003\Q1 Series DS OUTPUT (LOAD) SPECIFICATION LOAD CURRENT RERATING CURVES Min Max Unit DS6R3E 2 60 Vdc DS22R1E 2 220 Vdc 5 Operating Range DS6R3E 60 Vpeak DS22R1E 220 Vpeak Load Current (A) Peak Voltage 4 Input voltage <10Vdc 3 2 Input voltage = 30Vdc 1 0 0 10 20 30 Load Current Range 40 50 60 70 80 90 100 110 Ambient Temperature (°C) DS6R3E .005 3 A DS22R1E .005 1 A Figure 4a — DS6R3E thermal curves 1.50 Maximum Surge Current Rating (Non-Repetitive) 10 Apeak DS22R1E 5 Apeak 1.6 Vdc 1 mA On-State Voltage Drop Off-State Leakage Current 1.25 Load Current (A) DS6R3E 1.00 0.75 0.50 0.25 Turn-On Time DS6R3E DS22R1E 0 µs 200 µs 300 0 10 20 30 40 50 60 70 80 90 100 110 Ambient Temperature (°C) Figure 4b — DS22R1E thermal curves Turn-Off Time DS6R3E 800 µs DS22R1E 2000 µs Off-State dv/dt 200 V/µs ENVIRONMENTAL SPECIFICATION Min Max Operating Temperature –40 80 Storage Temperature –40 Input-Output Isolation Switching Frequency DS6R3E 0 500 Hz DS22R1E 0 400 Hz Input-Output Capacitance Unit °C 105 °C 2500 Vrms 8 pF NOTES: 1. Electrical specifications at 25°C unless otherwise specified. 2. On inductive loads, a free-wheeling diode (or clamp) is recommended. 3. For additional/custom options, contact factory. DS 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2003 TELEDYNE RELAYS DS\032003\Q1