Series DS6R3E 3A to 60 Vdc SIP Package DC Control Part Number Description DS6R3E 3A, 60 Vdc Part Number Explanation DS 6 R 3 E Control Range Series Switch Type2 1 Line Voltage Output Current – Amps 4 FEATURES/BENEFITS • Industry standard package • Surge tolerant • Compact size NOTES 1) Line Voltage (nominal) 6 = 60 Vdc 2) Switch Type: R = Random turn-on 3) Control Range: E = 3-30 Vdc MECHANICAL SPECIFICATION 0.01 .02 .39 (10.2) 1.70 (43.2) 0.01 APPLICATIONS • Programmable logic controllers • Instrumentation • Test equipment • Solenoid drivers .98 (25.4) 4–3+ 2– 1+ .02 .19 (6.5) .30 (7.63) .49 .001 .40 .001 (12.7) (10.16) .20 .001 (5.08) WEIGHT: 0.7 oz. (20g) DESCRIPTION The DS 3-amp solid-state single inline package (SIP) four-pin relays are designed for mounting on printed circuit boards. The relays are designed for medium power DC loads. The Series DS relay is an alternative to electromechanical and reed relays. Ø1 .30 (7.62) TOLERANCES: 0.1 TYPICAL APPLICATION Figure 1 – DS relays; dimensions in inches (mm) + 1+ BLOCK DIAGRAM 2– +3 1+ (*) Load 2– –4 Figure 2 – DS relays (*) On inductive loads - Figure 3 – DS relays © 2014 TELEDYNE RELAYS (800) 284-7007 • www.teledynerelays.com DS6R3E Page 1 DS6R3E\072014\Q3 Series DS6R3E 3A to 60 Vdc SIP Package DC Control INPUT (CONTROL) SPECIFICATION Control Range Min Max Units 3 30 Vdc LOAD CURRENT RERATING CURVES 5 Input Current Range 1 Must Turn-Off Voltage 30 mAdc 1 Vdc Load Current (A) 4 Input voltage <10Vdc 3 2 Input voltage = 30Vdc 1 Input Resistance (Typical) 1000 Ohms 0 0 OUTPUT (LOAD) SPECIFICATION Operating Range 20 30 40 50 60 70 80 90 100 110 Ambient Temperature (C) Min Max Units 2 60 Vdc 60 Vpeak 3 A Peak Voltage 10 ENVIRONMENTAL SPECIFICATION Load Current Range .005 Min Max Units Operating Temperature -40 80 °C -40 105 ºC Maximum Surge Current Rating (Non-Repetitive) On-State Voltage Drop Off-State Leakage Current 10 Apeak Storage Temperature 1.6 Vdc Input-Output Isolation 2500 Vrms 1 mA Input-Output Capacity 8 pF Turn-On Time 200 μs Turn-Off Time 800 μs Off-State dv/dt 200 V/μs Switching Frequency DS6R3E Page 2 0 500 NOTES 1) Electrical specifications at 25°C unless otherwise specified 2) On inductive loads, a free-wheeling diode (or clamp) is recommended 3) For additional/custom options, contact factory. Hz SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2014 TELEDYNE RELAYS DS6R3E\072014\Q3