RMB961 PCB power relays 54 BISTABLE • Height 15 mm • for PCB mounting • Insulation 4 kV / 8 mm • High switching capacity • Wash proof IP 67 version • Low power consumption • 1-coil bistable relays Contacts Contact number & arrangement Contact material Max. switching voltage Min. switching voltage AC/DC 1C/O, 1NO AgCdO, AgSnO2, AgCdO/Au 3,5 µm 400 V / 300 V 24 V AgCdO, 24 V AgSnO2, AgCdO/Au 3,5 µm - contact Relpol S.A. Rated load Min. switching current AC1 8 A / 250 V AC 100 mA AgCdO, 100 mA AgSnO2, AgCdO/Au 3,5 µm - contact Relpol S.A. Max. inrush current Rated current Max. breaking capacity Min. breaking capacity AC1 10 A 8A 2 000 VA 2,4 W AgCdO, 2,4 W AgSnO2, AgCdO/Au 3,5 µm - contact Relpol S.A. Resistance Max. operating frequency • at rated load • no load ≤ 100 mΩ AC1 3 600 cycles/hour 20 000 cycles/hour Coil Rated voltage Operating range of supply voltage Duration of supply voltage pulse DC 3...48 V see Table 1 min. 10 ms; max. 5 s Insulation Insulation category Insulation rated voltage Insulation max. voltage Dielectric strength • coil - contact • contact - contact Contact - coil distance • clearance • creepage C250 250 V AC 400 V AC 4 000 V AC 1 000 V AC ≥ 8 mm ≥ 8 mm General data Operating time (typical value) Release time (typical value) Electrical life • resistive AC1 • cos φ = 0,4 Mechanical life (cycles) Dimensions (L x W x H) Weight Ambient temperature • storing • operating Cover protection category Vibration resistance Solder bath temperature Soldering time 10 ms 6 ms > 105 8 A, 250 V AC > 1,3 x 105 5 A, 250 V > 3 x 107 29 x 10 x 15 mm 10 g -40...+80 oC -40...+70 oC IP 67 10 g 10...100 Hz max. 270 oC max. 5 s Standard contact material marked with bolt type. Note: At IP 67 version it is recommended that the vent pin is removed after soldering and washing process. www.relpol.com.pl RMB961 PCB power relays 55 Mounting Relays RMB961 1NO are mounted anly on PCBs. Relays RMB961 1C/O (3,2 mm pinning) are designed for: • direct PCB mounting • screw terminals sockets GZ96 with clip MS16, 35 mm DIN rail mount, EN 50022 or on panel mounting • terminals sockets for PCB mounting GW96 with clip MH16-2. www.relpol.com.pl RMB961 PCB power relays 56 see Table 1 page 55 www.relpol.com.pl