RM93 PCB power relays 81 • General purpose relays • Sensitive coil available • Protection category IP 40 or IP 67 • for PCB mounting Contacts Contact number & arrangement Contact material Max. switching voltage Min. switching voltage Rated load Min. switching current Rated current Max. breaking capacity Min. breaking capacity Resistance Max. operating frequency • at rated load • no load AC/DC AC1 DC1 AC1 AC1 1C/O, 1NO, 1NC AgCdO, AgCdO/Au 3 µm, AgCu/Au 0,2 µm 400 V / 250 V 10 V AgCdO, 5 V AgCdO/Au 3 µm, 10 V AgCu/Au 0,2 µm 8 A / 250 V AC 8 A / 24 V DC 5 mA AgCdO, 2 mA AgCdO/Au 3 µm, 5 mA AgCu/Au 0,2 µm 8A 2 000 VA 0,5 W AgCdO, 0,05 W AgCdO/Au 3 µm, 0,5 W AgCu/Au 0,2 µm ≤ 100 mΩ 600 cycles/hour 72 000 cycles/hour Coil Rated voltage Must release voltage Operating range of supply voltage Rated power consumption DC DC 6...80 V standard version DC: ≥ 0,1 Un see Table 1, 2 0,8 W standard version 0,5 W sensitive version 5...60 V sensitive version Insulation Insulation category Insulation rated voltage Dielectric strength • coil - contact • contact - contact Contact - coil distance • clearance • creepage C250 400 V AC 4 000 V AC 1 000 V AC ≥ 8 mm ≥ 8 mm General data Operating time (typical value) Release time (typical value) Electrical life • resistive AC1 • cosφ Mechanical life (cycles) Dimensions (L x W x H) Weight Ambient temperature • storing • operating Cover protection category Shock resistance Vibration resistance Solder bath temperature Soldering time Standard contact material marked with bolt type. www.relpol.com.pl 7 ms 2 ms > 2 x 105 8 A, 250 V AC see Fig. 2 > 3 x 107 28 x 12,5 x 26 mm for IP 67 H=26,5 mm 17 g -40...+85 oC -40...+70 oC IP 40 or IP 67 20 g 10 g 10...150 Hz max. 270 oC max. 5 s RM93 PCB power relays 82 www.relpol.com.pl RM93 PCB power relays 83 www.relpol.com.pl RM93 PCB power relays 84 Mounting Relays RM93 are mounted anly on PCBs. see Table 1, 2 page 82 www.relpol.com.pl