NS-5/V2 Dual Axis Inclinometer With Analog Voltage Output The NS-5/V2 dual-axis inclinometer is a member of a family of high performance, competitively priced, single and dual-axis inclinometers. The heart of every HL Planartechnik inclinometer is a small, state-of-the-art, inclination sensor. The sensor, which is comprised of a molded, ceramic case bonded, via a glass sealing process, to a ceramic substrate. Thin film, platinum electrodes are deposited on the substrate. Then the chamber is partially filled with electrolytic fluid and hermetically sealed. The molded, ceramic, sensor housing combined with a precise, planar electrode geometry yields excellent performance and consistent part-to-part uniformity. Applications Advantages • Zero point detection • Wide range of application • Aligning and level • Low vibration control sensitivity • Angle • Low price measurement 3 Pinout 4 5 2 The V-type sensors have an internal pre-processor and produce a -/+2V analog output. They have a compact sturdy design and a whole range of uses are possible thanks to the possibility of many different externalswitching combinations. With their machined, aluminum baseplate and IP 65 housing, they are an ideal choice for a variety of industrial, automotive and aerospace applications. 6 1 Diagram (angle vs. output signal) 7 2,5 1 +Ub Supply Voltage 2 GND Ground 3 Erde Earth 4 GNDx Ground for analog output Ux 0,5 5 GNDy Ground for analog output Uy 0 6 Ux Voltage output Ux 7 Uy Voltage output Uy Output voltage in V around 2,5V 2 1,5 1 -6 -4 -2 -0,5 Angle in ° 0 2 4 6 -1 -1,5 Dimensions (mm) -2 60 -2,5 40 1,5 Specifications 5,5 3,5 1,5 90 75 60 45 4,3 Range: Precision: Resolution: Temperature stability: Zero point: Sensitivity: Output signals: Operating temp. Range. Storage temp. Range: Supply voltage: Current consumption: Protection class: Connection: ± 5° 0,03° for -3°... +3° 0,001° 0,1° for 0°C ...+50°C 0,3° for 0°C ... +50°C -2V (-5°) to +2V (+5°) 0°C ...+70°C -40°C …+85°C +12 ... +24VDC ~ 9mA IP 65 Connector or Pigtail HL-Planartechnik GmbH Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020 Internet: http://www.hlplanar.com E-Mail: [email protected] Stand: 28.01.03 Design: Zn