NS-5/V2I Dual Axis Inclinometer

NS-5/V2I Dual Axis Inclinometer
With current output
The NS-5/V2I dual-axis inclinometer is a member of a
family of high performance, competitively priced, single and
dual-axis inclinometers.
The heart of every HL
Planartechnik inclinometer is a small, state-of-the-art,
inclination sensor. The sensor, which is comprised of a
molded, ceramic case bonded, via a glass sealing process,
to a ceramic substrate. Thin film, platinum electrodes are
deposited on the substrate. Then the chamber is partially
filled with electrolytic fluid and hermetically sealed. The
molded, ceramic, sensor housing combined with a precise,
planar electrode geometry yields excellent performance
and consistent part-to-part uniformity.
Applications
Advantages
• Zero point detection • Wide range of
application
• Aligning and level
• Low vibration
control
sensitivity
• Angle
• Low price
4
3
5
1
7
2
Pinout
All VI-type inclinometers have an internal pre-processor
and produce a 4-20 mA current output. They have a
compact sturdy design and a whole range of uses are
possible thanks to the possibility of many different externalswitching combinations. With their machined, aluminum
baseplate and IP 65 housing, they are an ideal choice for a
variety of industrial, automotive and aerospace
applications.
6
Diagram (angle vs. output signal)
25
1
+Ub
Supply Voltage
2
GND
Ground
3
Erde
Earth
4
GNDx
Ground for analog output Ix
5
GNDy
Ground for analog output Iy
6
Ix
Current output Ix
7
Iy
Current output Iy
Output current
in mA
20
15
10
5
Angle in °
Dimensions(mm)
0
-6
60
40
1,5
-2
5,5
90
75
Range:
Precision:
Resolution:
Temperature stability:
Zero point:
Sensitivity:
Analog Output:
60
4,3
45
0
2
4
6
Specifications
1,5
3,5
-4
Operating temp. Range:
Storage temp. Range:
Supply voltage:
Current consumption:
Protection class:
Connection:
± 5°
0.03° for -3°... +3°
0.001°
0.1° for 0°C ... 50°C
0.3° for 0°C ... 50°C
≈ 20mA (-5°) to
≈ 4mA (+5°)
0°C ... +70°C
-40°C … +85°C
+12 ...+24VDC
ca. 30mA
IP 65
Connector or Pigtail
HL-Planartechnik GmbH
Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
Internet: http://www.hlplanar.com E-Mail: [email protected]
Stand: 29.06.01
Design: Zn