P-511-449(V:3) P D057V T 1 V ers ion : 3.0 T E C HNIC AL S P E C IF IC AT ION MODE L NO. : P D057V T 1 T he content of this information is s ubject to be changed without notice. P leas e contact P V I or its agent for further information. C us tomer•s C onfirmation C us tomer Date FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com By P V I•s C onfirmation C onfirmed B y P repared B y T he information contained herein is the exclus ive property of P rime V iew International C o., Ltd. and s hall not be dis tributed, reproduced, or dis clos ed in whole or in part without prior written permis s ion of P rime V iew International C o., Ltd. P age:1 P-511-449(V:3) PD057VT1 Revision History Rev. Issued Date 1.0 Jun. 07, 2007 2.0 Aug. 11, 2008 3.0 May 19, 2009 Revised Contents New Add Page 16 13.Handling Cautions d) items of 13-1 Delete backlight connector pin pitch BeforeǺ Connector typeǺJST BHR-03VS-1, PIN No 3 pins, pitch=8.0mm AfterǺ Connector typeǺJST BHR-03VS-1, PIN No 3 pins The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 P-511-449(V:3) PD057VT1 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Color and Gray Scale Reference Interface Timing Power On Sequence Optical Characteristics 1 2 3 4 4 4 5 6 7 7 8 9 10 12 12 16 18 19 Handling Cautions Reliability Test Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 P-511-449(V:3) PD057VT1 1. Application This data sheet applies to a color TFT LCD module, PD057VT1. PD057VT1 module applies to OA product, car TV (must use Analog to Digital driving board), which requires high quality flat panel display. If you must use in severe reliability environment, please don’t extend over PVI’s reliability test conditions. 2. Features . VGA (640*480 pixels) resolution . Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Thin and light weight . Display ColorsΚ262,144 colors . TTL interface 3. Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Gray scale inversion direction Specifications 5.7 (diagonal) 640ͪ(R,G,B)ͪ480 262,144 115.20 (H)ͪ86.4 (V) 0.18(H)ͪ0.18(V) Stripe 144.0 (W)Ø104.6(H)Ø13.0 (D) (typ.) 211²10 36-LED Anti-glare + EWV film Normally white 6 o’clock [ref. to Note 12-1] Unit inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 P-511-449(V:3) PD057VT1 4.Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 P-511-449(V:3) PD057VT1 5.Input / Output Terminals 5-1) TFT-LCD Panel Driving Connector typeΚELCO 08-6210-033-340-800A+, PIN No 33 pins Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol I/O GND I CK I Hsync I Vsync GND R0 I R1 I R2 I R3 I R4 I R5 GND I G0 I G1 I G2 I G3 I G4 I G5 GND I B0 I B1 I B2 I B3 I B4 I B5 GND I ENAB VCC VCC R/L I 31 U/D I 32 33 V/Q GND I - Description GND Clock signal for sampling each data signal Horizontal synchronous signal (neqative) Vertical synchronous signal (neqative) GND RED data signal (LSB) RED data signal RED data signal RED data signal RED data signal RED data signal (MSB) GND GREEN data signal (LSB) GREEN data signal GREEN data signal GREEN data signal GREEN data signal GREEN data signal (MSB) GND Blue data signal (LSB) Blue data signal Blue data signal Blue data signal Blue data signal Blue data signal (MSB) GND Signal to settle the horizontal display position(positive) +3.3V power supply +3.3V power supply Horizontal display mode select signal LΚNormal ,HΚLeft /Right reverse mode Vertical display mode select signal HΚNormal ,LΚUp/Down reverse mode HΚNormal GND Remark Note5-1 Note5-2 Note5-1ΚThe horizontal display start timing is settled in accordance with rising of ENAB signal. In case ENAB is fixed ”Low”,the horizontal start timing is determined as described in 10-2. Don`t keep ENAB”High” during operation. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 P-511-449(V:3) PD057VT1 Note 5-2ΚThe definitions of U/D & R/L R/L(PIN 30)= Low, U/D(PIN 31)= High R/L(PIN 30)= High , U/D(PIN 31)= Low 5-2) LED Backlight driving Connector typeΚJST BHR-03VS-1, PIN No 3 pins Pin No Symbol 1 + 2 NC 3 - Description Remark Input terminal (Anode) Red No connect - Input terminal (Cathode) Black 6.Absolute Maximum Ratings: Parameters Input Voltage GND=0V, Ta=25к Symbol VI Condition MAX. Unit V Ta=25к -0.3~+4 Ta=25к +3.3V supply voltage VCC 0~+3.6 V Note6-1ΚCK,R0~R5,G0~G5,B0~B5,Hsync,Vsync,ENAB,R/L,U/D,V/Q Remark Note6-1 7.Electrical Characteristics 7-1) Recommended Operating Conditions: Item +3.3V Supply Voltage Permissive input ripple voltage Input voltage(Low) Input voltage(High) GND=0V, Ta=25к Symbol VCC Min. Typ. Max. +3.0 +3.3 +3.6 VRF VIL VIH 0 0.7 VCC - 100 0.3 VCC VCC Unit Remark V mVp-p VCC=3.3V V V The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 P-511-449(V:3) PD057VT1 7-2) Recommended Driving Condition for LED Back Light Parameter LED voltage LED current Symbol VLED ILED Min. - Typ. 20 Max. (11) - Unit V mA Back Light Power Consumption PLED - - 2640 mW Ta=25к Remark Note 7-1 Note 7-2 Note 7-1 Note 7-3 Note 7-1ΚThe ILED = 20 mA (Constant current) Note 7-2ΚThe LED driving condition is defined for each LED module. (3 LED Serial) The input current= 20 mA*12=240 mA. Note 7-3ΚPLED = VLED-1 * ILED-1 + VLED-2* ILED-2 ….. + VLED-11 * ILED-11+VLED-12 * ILED-12 Anode Cathode 7-3) Power Consumption Parameters +3.3V Current Dissipation LCD Panel Power Consumption Total Power Consumption Symbol ICC - Typ. 67 0.22 Max. 100 0.33 Unit mA W - - 2.97 W Remark Note 7-4 Note 7-4ΚThe power consumption for back light is not included. 8. Pixel Arrangement The LCD module pixel arrangement is stripe configuration. 640 478 479 480 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 P-511-449(V:3) PD057VT1 9. Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker ʆ Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker ʆ Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker ʆ Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 P-511-449(V:3) PD057VT1 10. Interface Timing 10-1) Timing Parameters Note 10-1 : In case of low-frequency, the deterioration of display quality, flicker etc., may occur. 10-2) Display Position in horizontal direction Display position in horizontal direction is designated by rising timing of ENAB signal. When ENAB is fixed to “Low”, the horizontal display will starts from 144th clock after HS falling. 10-3) Display Position in vertical direction th Display start position in vertical direction is fixed to the 35 line. The ENAB signal does not relate to Vertical display position. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 P-511-449(V:3) PD057VT1 10-4) Timing Diagram THWh Tcph Tcwl Tcwh *Only when enable terminal is fixed “ Low” Tdhd Tdsu Horizontal invalid data period THs D638 D639 D640 Horizontal invalid data period Tesu Twv TSTV Vertical invalid data period DH1 DH2 DH3 DH479 DH480 Vertical invalid data period The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 P-511-449(V:3) PD057VT1 11. Power On Sequence VDD 3.0V 3.0V Signal*3 0.3V t2 t1 t3 Back Light ON OFF OFF 10ms 10ms 1. 0Іt1Љ20ms 2. 0Іt2Љ50ms 3. 0Іt3Љ1s 12. Optical Characteristics 12-1) Specification: Parameter Symbol Ӱ Horizontal Viewing Angle Vertical Contrast Ratio Response time Ӱ(to 6 o’clock) Ӱ(to 12 o’clock) CR Rise Tr Fall Tf Condition CRЊ10 At optimized viewing angle Ӱ=0̓ Ӱ=0°/ӽ=0 MIN. TYP. MAX. 70 75 - Ta=25к Unit Remarks deg 65 70 - deg 45 50 - deg 400 600 - - - 15 30 ms - 25 ms 450 500 50 - Note 12-1 Note 12-2 Note 12-3 Brightness - Luminance Uniformity U% 80 85 - % x 0.26 0.30 0.34 - y 0.29 0.33 0.37 - 20000 - 3.5 - % Note 12-7 hrs Note 12-6 White Chromaticity Cross Talk - LED Life Time - Ӱ=0̓ cd/ф Note 12-4 Note 12-5 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 P-511-449(V:3) PD057VT1 Note 12-1ΚThe definitions of viewing angles are as follow LED Note 12-2ΚThe definition of contrast ratio CR = Luminance at White Pattern Luminance at Black Pattern Note 12-3ΚDefinition of Response Time Tr and Tf W hite Black W hite 100% 90% Brightness 10% 0% Tr Tf The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 P-511-449(V:3) PD057VT1 Note 12-4ΚAll optical measurements shall be performed after backlight being turned-on for 30 mins. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field = 1° TFT-LCD module Optical characteristics measuring configuration Note 12-5ΚThe uniformity of LCD is defined as U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter: BM-5A or BM-7 fast (TOPCON) Measurement distance: 500 mm +/- 50 mm Ambient illumination: < 1 Lux Measuring direction: Perpendicular to the surface of module The test pattern is white. 1/6 2/6 2/6 1/6 1/6 2/6 2/6 1/6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 P-511-449(V:3) PD057VT1 Note 12-6ΚThe “LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25к and ILED = 240mA. Note 12-7ΚCross Talk (CTK) = ⏐YA-YB⏐ ͪ100% YA YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 P-511-449(V:3) PD057VT1 13. Handling Cautions 13-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. d) Please following the tear off direction as figure 13-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 13-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 13-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 13-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. 13-5) Polarizer mark The polarizer mark is to describe the direction of wide view angle film how to match up with the rubbing direction. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 P-511-449(V:3) PD057VT1 Figure 13-1 the way to peel off protective film The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 P-511-449(V:3) PD057VT1 14. Reliability Test No Test Item Test Condition 1 High Temperature Storage Test Ta = +80к, 240 hrs 2 Low Temperature Storage Test Ta = -40к, 240 hrs 3 High Temperature Operation Test Ta = +70к, 240 hrs 4 Low Temperature Operation Test Ta = -30к, 240 hrs 5 6 Remark High Temperature & High Humidity Ta = +60к, 90%RH, 240 hrs Operation Test (No Condensation) Thermal Cycling Test -20к+70к, 200 Cycles (non-operating) 30 min 30 min Frequency: 10 ~ 57 HZ /Vibration Width:0.075mm 2 58-500 Hz / Gravity: 9.8m/s Sweep time: 11 minutes Test period: 3 hrs for each direction of X, Y, Z Gravity: 490m/s2 * 6ms Direction: ̈́X, ̈́Y, ̈́Z 3 times for each direction Vibration Test 7 (non-operating) Shock Test 8 (non-operating) 150pFΔ330Ө Electrostatic Discharge Test 9 (non-operating) AirΚ±15KVΙContactΚ±8KV 10 times/pointΔ9 points/panel face Ta: ambient temperature Note: The protective film must be removed before temperature test [Criteria] In the standard conditions, there is not display function NG issue occurred. (IncludingΚline defect, no image) All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 P-511-449(V:3) PD057VT1 15. Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19