PM070WL3 Preliminary Version : 0.1 TECHNICAL SPECIFICATION MODEL NO. : PM070WL3 The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer’s Confirmation Customer Date By PVI’s Confirmation FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAYS.com The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 PM070WL3 TECHNICAL SPECIFICATION CONTENTS NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ITEM Cover Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input Terminals Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Color and Gray Scale Reference Block Diagram Interface Timing Power On Sequence Optical Characteristics Handling Cautions Reliability Test Packing Diagram Revision History PAGE 1 2 3 3 3 4 6 8 8 10 11 12 13 16 16 20 21 22 23 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 PM070WL3 1.Application This data sheet applies to a color TFT LCD module, PM070WL3. The application of panel are OA product, portable DVD, car TV(must use Analog to Digital driving board), which requires high quality flat panel display. Prime View assume no responsibility for any damage resulting from the use of the device which dose not comply with the instructions and the precautions in these specification sheet. 2. Features . Wide VGA (800*480 pixels) resolution . Amorphous silicon TFT LCD panel with LED back-light unit . Pixel in stripe configuration . Thin and light weight . Display Colors262,144 colors . 3.3V LVDS interface standard: THC63LVDF64A as receiver . +3.3V DC supply voltage for TFT LCD panel driving . Wide viewing angle 3.Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight LED Back-light Surface treatment Display mode Gray scale inversion direction Specifications 7.0(diagonal) 800(R, G, B)480 262,144 152.4(H)91.44(V) 0.1905(H)0.1905(V) Stripe 166.3(W)105.3 (H)10.7 (typ.) (D) TBD 33-LED Anti-glare and Wide View Film Normally white 6 o’clock Unit inch dot mm mm mm g [ ref to Page 17 viewing angle ] The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 PM070WL3 4.Mechanical Drawing of TFT-LCD Module Outline Drawing : Front View (unit mm) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 PM070WL3 Outline Drawing : Rear View (unit mm) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 PM070WL3 5.Input Terminals 5-1) TFT-LCD Panel Driving Connector type: DF19K-20P-1H (56)(HRS) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Symbol Vcc Vcc GND GND INOINO+ GND IN1IN1+ GND IN2IN2+ GND CLKCLK+ GND NC NC GND GND Function +3.3V Power Supply +3.3V Power Supply Ground Ground LVDS receiver signal channel 0 LVDS receiver signal channel 0 Ground LVDS receiver signal channel 1 LVDS receiver signal channel 1 Ground LVDS receiver signal channel 2 LVDS receiver signal channel 2 Ground LVDS receiver signal clock LVDS receiver signal clock Ground No connection No connection Ground Ground Remark LVDS Interface Block Diagram Hsync Vsync DENB CLK TIN12~TIN17 TIN18 TIN19 TIN20 CLK IN IN0+ IN1IN1+ IN2IN2+ CLK- PLL THC63LVDM 63A Customer system side IN0- CLK+ PLL RxOUT0~RxOUT5 RxOUT6~RxOUT11 RxOUT12~RxOUT17 RxOUT18 RxOUT19 RxOUT20 LCD Internal Circuit B0~B5 TIN6~TIN11 LVDS to TTL parallel G0~G5 TIN0~TIN5 TTL parallel to LVDS Graphic Controller Circuit R0~R5 CLK OUT THC63LVDF64A PM070WL3 module side The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 PM070WL3 Recommended Transmitter (THC63LVDM63A Thine) to PM070WL3 interface Assignment: Input terminal of THC63LVDM63A Symbol TIN0 TIN1 TIN2 TIN3 TIN4 TIN5 TIN6 TIN7 TIN8 TIN9 TIN10 TIN11 TIN12 TIN13 TIN14 TIN15 TIN16 TIN17 TIN18 TIN19 TIN20 CLK in No. 44 45 47 48 1 3 4 6 7 9 10 12 13 15 16 18 19 20 22 23 25 26 Graphic controller output signal Symbol R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5 Hsync Vsync DENB CLK Function Red pixel data (LSB) Red pixel data Red pixel data Red pixel data Red pixel data Red pixel data(MSB) Green pixel data (LSB) Green pixel data Green pixel data Green pixel data Green pixel data Green pixel data(MSB) Blue pixel data(LSB) Blue pixel data Blue pixel data Blue pixel data Blue pixel data Blue pixel data(MSB) Horizontal Synchronous Signal Vertical Synchronous Signal Compound Synchronization signal Data sampling clock To PM070WL3 Output signal interface terminal symbol (Symbol) Tout0- No.5 : IN0- Tout0+ No.6 : IN0+ Tout1- No.8 : IN1- Tout1+ No.9 : IN1+ Tout2- No.11 : IN2- Tout2+ N0.12 : IN2+ TCLK outTCLK out+ No.14 : CLK No.15 : CLK+ DENB input signal. If customer wanted to off the DENB mode , you must keep the DENB always High or Low. 1 0 5 6 tc 8 0 0 tc DENB (tc: the period of sampling clock) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 PM070WL3 6.Absolute Maximum Ratings: Parameters Supply Voltage Input Signals Voltage Backlight Driving Frequency Symbol VCC VIN FL MIN. -0.3 -0.3 0 MAX. +4.0 VCC +0.3 100 GND=0V, Ta=25 Unit Remark V V Note 6-1 KHz Note 6-1: LVDS signal. 7.Electrical Characteristics 7-1) Recommended Operating Conditions: Item Symbol VCC Supply Voltage Current Dissipation ICC LVDS Differential input high threshold VTH LVDS Differential input low threshold VTL Vcom Voltage Vcom Min. 3.0 -100 - Typ. 3.3 199.2 3.1 GND = 0VTa = 25 Max. Unit Remark 3.6 V 217.3 mA Note 7-1 100 mV Note 7-2 V Note 7-1 : To test the current dissipation of VCC, using the “color bars” testing pattern shown as below 1 2 3 4 5 6 7 8 1. 2. 3. 4. 5. 6. 7. 8. White Yellow Cyan Green Magenta Red Blue Black ICC current dissipation testing pattern Note7-2 : Please refers to THC63LVDF64A specification by THINE. This LCD module conforms to LVDS standard. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 PM070WL3 7-2) Backlight driving Connector type: JST BHSR-02VS-1 Pin No Symbol Description Remark 1 VL1 Input terminal (Hi voltage side) Wire color : Red 2 VL2 Input terminal (Ground side) Wire Color : Black 7-3) Recommended Driving Condition for LED Back Light Parameter Supply voltage of LED backlight Supply current of LED backlight Backlight Power Consumption Symbol VLED ILED PLED Min TBD TBD TYP 9.9 20 2.18 MAX TBD TBD GND = 0 V Ta = 25 Unit Remark V ILED = 20 mA mA Note 7-3 W Note 7-4 Note 7-3 : The LED driving condition is defined for each LED module. (3 LED Serial) Note 7-4 : PLED = VLED-1 * ILED-1 + VLED-2* ILED-2 ….. + VLED-10 * ILED-10+VLED-11 * ILED-11 V LED -1 V LED -2 GN D V LE D-10 V LED -11 7-4) Power Consumption Parameter LCD Power consumption (W/O BL) LED Backlight Power Consumption Total Power Consumption Symbol - Typ. 0.66 Max. 0.72 TBD TBD TBD TBD Unit W W W Remark Note 7-5 Note 7-5: Backlight lamp power consumption is calculated by IL x VL The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 PM070WL3 8. Pixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B 1 st Line RGB R G B R G B 2 nd Line RGB R G B 3 rd Line RGB 1 st Pixel 800 th Pixel 1 Pixel = R G B RGB 478 th Line RGBRGB RGB 479 th Line RGBRGBRGB 480 th Line RGB RGB The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 PM070WL3 9. Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 PM070WL3 10. Block Diagram 10-2) TFT-module Block Diagram #$ ! ! " THC63LVDF64A The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 PM070WL3 11. Interface Timing 11.1) Timing Parameters Power supply CLK Frequency HSYNC Period Display period Pulse width Back-porch Front-porch Hpw+Hbp Hsync-CLK Vsync-Hsync VSYNC Period DENB R,G,B Symbol VCC 1/tc tc Hp Min. 3.0 10 0 - Typ. 3.3 32 31.25 33 1056 800 128 86 42 214 0 17.325 525 480 2 33 10 35 Max. 3.6 Tc-10 200 - Unit V MHz ns us tc tc tc tc tc tc ns tc ms Hp Hp Hp Hp Hp Hp T1 860 1056 1064 tc T2 - 800 - tc T3 - 480 - T1 T4 520 525 800 T1 Hdp Hpw Hbp Hfp Hhc Hvh Vp Display period Pulse width Back-porch Front-porch Vpw+Vbp Horizontal scanning period Horizontal display period Vertical display period Frame cycling period CLK-DATA Vdp Vpw Vbp Vfp Dcd 10 - - ns DATA-CLK Ddc 8 - - ns Remark The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 PM070WL3 11.2) The Timing Diagram a. Input signal range a.1 tc Dcd R05-R00 G05-G00 B05-B00 Ddc DENB a.2 HSYNC timing Hp Hpw HSYNC Hbp Hdp Hfp R,G,B Vaild data a.3 CLK,HSYNC relationship CLK Hhc HSYNC The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 PM070WL3 a.4 HSYNC, VSYNC relationship a.5 VSYNC timing DENB a.6 DENB timing Line 1 Line 480 Line 1 Line 2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 PM070WL3 12. Power On Sequence VCC Logic Signal Backlight ON OFF >10ms OFF >10ms 1. 0t120ms 2. 0t250ms 3. 0t31s 13. Optical Characteristics 13-1) Specification: Parameter Horizontal Symbol Condition MIN. 21.22 55 12 Viewing 35 (to 12 ’clock) CR10 Angle Vertical 11 50 (to 6 o’clock) Contrast Ratio CR 250 =0 Rise Tr Response time =0 Fall Tf Brightness L 350 =0°/=0 Luminance Uniformity U 70 LED Life Time 30000 x TBD White Chromaticity =0°/=0 y TBD Cross Talk =0 TYP. 60 MAX. - Unit deg 40 - deg 55 - deg 400 15 25 400 75 TBD TBD - 30 50 TBD TBD 3.5 ms ms cd/ % hr % Ta=25 Remarks Note 13-1 Note 13-2 Note 13-3 Note 13-4 At 6mA Note 13-5 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 PM070WL3 All the optical measurement shall be executed 30 minutes after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field = 1° TFT-LCD module DC/AC Inverter Optical characteristics measuring configuration Topcon BM-5A or BM-7 fast luminance meter 1field of view is used in the testing (after 30 minutes’ operation). The typical luminance value is measured at lamp current 6.0 mA. Note 13-1: The definitions of viewing angles are as follow. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 PM070WL3 Note 13-2: The definition of contrast ratio = Note 13-3: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf Note 13-4: The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U= The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1/6 2/6 2/6 1/6 1/6 2/6 2/6 1/6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 PM070WL3 Note 13-5: Cross Talk (CTK) = YA-YB 100% YA YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 PM070WL3 4. Handling Cautions 14-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking care of static electricity. 14-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 14-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 14-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 PM070WL3 15. Reliability Test No 1 2 3 4 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity 5 Operation Test Thermal Cycling Test 6 (non-operating) 7 Vibration Test (non-operating) 8 Shock Test (non-operating) 9 Electrostatic Discharge Test (non-operating) Test Condition Remark Ta = +85, 240 hrs Ta = -40, 240 hrs Ta = +80, 240 hrs Ta = -30, 240 hrs Ta = +60, 90%RH, 240 hrs (No Condensation) -30+80, 200 Cycles 30min 30min Frequency10 ~ 55 HZ , Amplitude1 mm Sweep time: 11 min Test Period: 6 Cycles for each direction of X, Y, Z 100G, 6ms Direction: X, Y, Z Cycle: 3 times Contact mode: ±8KV,10times/point , 9 points/panel face Air mode: 150pF, 330ΩAir : ±15KV Ta: ambient temperature [Criteria] In the standard conditions, there is not display function NG issue occurred. (including : line defect ,no image). All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21 PM070WL3 16. Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:22 PM070WL3 Rev. 1.0 Eng. Issued Date Anson,Tsai Oct.27 ,2006 Revision History Revised Contents New The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:23