Maintenance-Free Rechargeable Sealed Lead-Acid Battery BP1.2-12 The battery is constructed by plates, separators, safety valves and container. Since the electrolyte is held by a glassmat separator and plates, the battery can use in any direction and position without leakage. PERFORMANCE SPECIFICATIONS Nominal Voltage(V).......................................................................................................12 volts(6cells in series) Nominal Capacity(AH) 20 hour rate F.V.(1.75V/cell)( 60mA to 10.50volts) ................................................................................1.2A.H. 10 hour rate F.V.(1.75V/cell)( 114mA to 10.50volts).............................................................................1.14A.H. 5 hour rate F.V.(1.75V/cell)( 204mA to 10.50volts) ............................................................................1.02A.H. 1 hour rate F.V.(1.55V/cell)( 720mA to 9.30volts)...............................................................................0.72A.H. Approximate Weight......................................................................................................................590g(1.30lbs.) Terminal Standard......................................................................................................................................................T1 Internal Resistance (Fully Charged Battery)...........................................................................................<120m Maximum Discharge Current For 5 sec.(A).....................................................................................................18A Maximum Charge Current(A).......................................................................................................................0.36A Ambient Temperature Charge..........................................................................................................................0oC(32oF)~40oC(104oF) Discharge...................................................................................................................-20oC(-4oF)~50oC(122oF) Storage......................................................................................................................-20oC(-4oF)~40oC(104oF) Vibration test: Frequency: 16.7HZ Amplitude: 4mm Vibrate the battery horizontally or vertically for 60 minutes. The battery have no abnormality. Case.............................................................................................................................................................ABS Dimension(mm/inch) Length 1.5mm...................................................................................................................97/3.82 Width 1.5mm...................................................................................................................45/1.77 Container Height 1.5mm...................................................................................................................53/2.09 Total Height 2mm......................................................................................................................59/2.32 Application.....................................................................................................................Security Alarm Systems. O O BATTERY CHARGING CHARACTERISTICS BP1.2-12 Battery discharge characteristics (25 C/77 F) (Typical example of the charge characteristics for the standby use) Terminal Voltage(V) 11.0 0.204A 0.114A 0.06A 0.3A 10.0 0.72A 9.0 8.0 3.6A 2.4A 0.21 15.0 120 0.18 14.0 100 0.15 13.0 80 60 40 Charge voltage(V) Charge volume(%) 12.0 140 Charge current(CA) 13.0 0.12 0.09 0.06 20 0.03 0 0 Charge voltage C ha rg e 1 Discharge 100 %(0.05CA x 20h) 50 %(0.05CA x 10h) 2 Constant voltage charging Charge voltage:2.275V/cell Charge current:0.1CA O O 3 Temperature:20 C(68 F) 12.0 11.0 10.0 Charge current 1.2A 7.0 0 0 1 2 3 5 10 20 30 60 2 3 5 10 20 For cycle service 20 25 Effect of Temperature on Long Term Float Life 10 8 Temperature Charging Max. charging compensation Voltage current coefficient of at 20OC (CA) charging voltage (V/cell) (mV/ OC/cell) 2.25~2.30 -3 Charging time O 0.1CA, 20 C (h) 100% discharge 24 0.3 Temp O ( C) 50% discharge 20 0~40 O (32~104 F) 2.40~2.50 -4 0.3 16 6 5 4 Life expectancy(year) Constant voltage & Constant current charging (with current restrication) 15 Charge time (hr) Charging Procedure For standby power Source 10 30 Discharge time Charging method 5 Hr Min Application vo lu m e Charging voltage : 2.275V/cell 3 2 1 10 O 0.5 O *Temperature compensation of charging voltage is not needed, when using the batteries within 5 C to 35 C range. 20 68 30 86 50 oC 122 oF 40 104 Battery temperature OUTER DIMENSIONS TERMINAL TYPE mm(inch) Constant power discharge characteristics at 25 oC/77 oF Discharge time Terminal T1 4.75(0.187) Final Voltage 15Min 30Min 1Hr 3Hr 5Hr 10Hr 20Hr 0.8(0.03) 10.80V 43.4 31.9 25.6 15.2 8.73 3.50 2.41 1.35 0.70 10.50V 50.2 34.6 26.8 15.8 9.00 3.57 2.45 1.37 0.72 10.20V 53.4 35.8 27.6 16.2 9.16 3.60 2.46 1.37 0.72 9.90V 55.8 36.7 28.2 16.4 9.27 3.63 2.47 1.38 0.73 9.60V 57.6 37.4 28.8 16.6 9.36 3.65 2.48 1.38 0.73 45 1.5(1.77 0.06) TERMINAL POSITION 53 1. 5( 2. 09 0.. 06) 59 2( 2. 32 0. 08) 97 1.5(3.82 0.06) 10Min Battery output power(W) 3.2(0.13) 6.35(0.25) 5Min UL R MH19884 B.B. BATTERY CO., LTD. Web Site: http://www.bb-battery.com USA : B&B BATTERY (USA) INC. 6415 RANDOLPH ST. COMMERCE, CA, 90040 U.S.A. TEL: 1-323-278-1900 . 1-800-278-8599 FAX: 1-323-278-1268 CHINA FACTORY: CHENG DONG TRIAL AREA, HUANG GANG, RAOPING GUANG DONG, CHINA, 515700 TEL: 86-768-7601001-2 FAX: 86-768-7601469 UK: JAPAN: B & B BATTERY (UK) CO., LTD. TEL: 44-161-339-9458 FAX: 44-161-343-7030 B & B BATTERY(JAPAN) CO., LTD. TEL: 81-426-256-537 FAX: 81-426-256-537 HONG KONG: TAIWAN: NATIONAL TRADING LTD. B & B BATTERY CO., LTD. TEL: 852-2301-3800 FAX: 852-2739-1182 TEL: 886-6-5898081~3 FAX: 886-6-5898087 QUALITY ASSURED FIRM NATIONAL ACCREDITATION OF CERTIFICATION BODIES I S O 1 4 0 0 1 UKAS ENVIRONMENTAL MANAGEMENT Reg. No. 059-C