Setup menu General information The optional user settings of the wall operating unit are configured in the Setup menu. EASY Color Drive Calling up the Setup menu Press buttons F1+F2 simultaneously and hold for at least 5 s until the Setup symbol (3) appears on the display (A). A F2 F1 - C + speed esc D F4 Navigating and configuring Select menu item/setting: Use the jog wheel (D) Confirm selection: Press the central button (C) Cancel and return: Press button F4 briefly Leaving the Setup menu Press button F4 and hold for at least 3 s or select the „Exit“ menu item. 3 A LEARN Wall operating unit Configuration SETUP RF Parameter settings The menu items for configuration are described below. Default or reset settings are highlighted in bold. Menu item Backlight B. color Colour (1…12) B. brightn. Brightness (off, low, mid, high) B. timeout Switch-off delay time or time to return to standby (3 s, 5 s, 10 s) Nightlight Orientation lighting for the central button (external power supply required) Jog wheel basic function Default Brightness Changing the brightness Color Change the colour/colour temperature Scenes Call up scenes Last func. Function selected last None Switch On To last state Scene 1…16 To scene A1…A16 All channels to 100% Channel control RGB 3-channel colour control RGB+ white 3-channel colour control with white channel Warm/Cold 2-channel colour temperature control Ch-1 = warm-white channel Ch-3 = cold-white channel 8-Ch. … 1-Ch. Scene set Scenes 1-8 Scenes 9-16 Scenes Scene 1…8 Scene 9…16 Sequence Sequence A…D Speed set 8-channel/8-groups- … 1-channel/1-group control Scene range A1-A8 A9-A16 Scenes that can be called up from the scene range (see "Scene set") A1…A8 (enabled=available / disabled = not available) A9…A16 Sequence A...D can be called up/cannot be called up via F3 button Speed setting Fade Time Via fade time Multiplier Via speed factor Disabled Buttons EASY_Color_Drive_ko0908en_we1.01.indd None Switch on Last state 100% Channel set VIII 2009 Function Background lighting Disabled Enable/disable buttons F1-Color F1 F2-Brightness F2 F3-Play F3 F4-Stop F4 Jogwheel Jog wheel OSRAM GmbH Kunden Service Center Customer-Service-Center (CSC) C1-On/Off Service Steinerne Furt 62 86167 Augsburg Germany Reset Exit Demo Mode On/off button Start demo mode Reset wall transmitter to default settings Leave the Setup menu Tel : +49 (0) 1803 677 - 200 (kostenpflichtig / charges apply) Fax.: +49 (0) 1803 677 - 202 www.osram.com www.osram.de 40083214217776 4008321421777 Page 1 of 2 Basic settings B Use DIP switches 1 and 2 on the back (G). Do not change DIP switches 4-8. E Function DIP switch Signal transmission type G 1 ON 2 3 4 5 6 7 Access to user settings Radio 1 ON ... Wired 1 OFF ... Enable 2 ON ... Disable 2 OFF ... 8 OFF Default setting RESET of control units Reset the connected control units to the default setting. 1 ON 2 3 4 5 6 7 8 Set DIP switch 3 on the back of the wall operating unit (G) to OFF. Press central button (C). OFF Set DIP switch 3 to ON again. G Conformity with the relevant EU directives is confirmed by the CE symbol. Page 2 of 2