Formosa MS Axial Leaded Ultra Fast Rectifiers MUR460 List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings .............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 Taping & bulk specifications for AXIAL devices.................................... 4 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities........................................................... 6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 1 Document ID Issued Date Revised Date Revision Page. DS-222309 2012/09/10 - A 6 Formosa MS Axial Leaded Ultra Fast Rectifiers MUR460 4.0A Axial Leaded Ultra Fast Rectifiers-600V Package outline DO-201AD Features • Super fast switching time for Hi-efficiency. • Low Forward Voltage Drop . • High Surge Current Capabiltiy . • Low Power Loss . • Glass passivated chip junction. • Ultra-Fast Recovery Time. • Lead-free parts meet RoHS requirments. • Suffix "-H" indicates Halogen free parts, ex. ΜUR460-H. 1.0(25.4) MIN. .220(5.6) .197(5.0) DIA. .375(9.5) .285(7.2) Mechanical data 1.0(25.4) MIN. .052(1.3) • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, DO-201AD • Lead : Axial leads, solderable per MIL-STD-202, .048(1.2) DIA. Dimensions in inches and (millimeters) Method 208 guranteed • Polarity: Color band denotes cathode end • Mounting Position : Any • Weight : Approximated 1.10 gram Maximum ratings and Electrical Characteristics (AT PARAMETER T A=25 oC unless otherwise noted) CONDITIONS Forward rectified current See Fig.2 Forward surge current 8.3ms single half sine-wave (JEDEC methode) V R = V RRM T J = 25 OC Reverse current UNIT IO 4.0 A I FSM 150 A MIN. TYP. 5.0 IR V R = V RRM T J = 100 OC Typical Diode junction capacitance MAX. Symbol f=1MHz and applied 4V DC reverse voltage Storage temperature CJ T STG μA 100 pF 70 O +150 -65 C *1 Repetitive peak reverse voltage SYMBOLS MUR460 *1 V RRM (V) V RMS*2 (V) *3 VR (V) *4 VF (V) *5 t rr (ns) Operating temperature T J, ( OC) 600 420 600 1.25 50 -55 to +150 Note 1. Reverse recovery time test condition, I F =0.5A, I R =1.0A, I RR =0.25A http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 *2 RMS voltage *3 Continuous reverse voltage *4 Maximum forward voltage@I F=4.0A *5 Maximum Reverse recovery time, note 1 Page 2 Document ID Issued Date Revised Date Revision Page. DS-222309 2012/09/10 - A 6 Rating and characteristic curves FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE INSTANTANEOUS FORWARD CURRENT,(A) CHARACTERISTICS 100 10 1 4 3 2 1 0 25 75 50 100 175 150 125 0.1 AMBIENT TEMPERATURE (°C) PEAK FORWAARD SURGE CURRENT,(A) TJ =25°C Pulse Width=300us 1%Duty Cucle 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE,(V) FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS 50W NONINDUCTIVE 10W NONINDUCTIVE ( ) (+) D.U.T. 25Vdc (approx.) 5 AVERAGE FORWARD CURRENT,(A) FIG.1-TYPICAL FORWARD PULSE GENERATOR (NOTE 2) ( ) FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 200 150 Sine Wave 100 JEDEC method 50 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz (+) 1W NONINDUCTIVE 8.3ms Single Half TJ=25 C OSCILLISCOPE (NOTE 1) NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. FIG.5-TYPICAL JUNCTION CAPACITANCE 140 JUNCTION CAPACITANCE,(pF) trr | | | | | | | | +0.5A 0 -0.25A -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm 120 100 80 60 40 20 0 .01 .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 3 Document ID Issued Date Revised Date Revision Page. DS-222309 2012/09/10 - A 6 Formosa MS Axial Leaded Ultra Fast Rectifiers MUR460 Pinning information Pin Pin1 Pin2 Simplified outline cathode anode Symbol 1 2 1 2 Marking Type number Marking code MUR460 MUR460 Taping & bulk specifications for AXIAL devices 52.4mm 17mm DIA. 55mm Max. A 17mm DIA. 72mm DIA. 71mm Max. 355mm OFF Center both sids 1.0mm Max OFF Alignment 1.2mm 6.3mm REEL PACKING DEVICE Q'TY 1 COMPONENT CARTON Q'TY 2 APPROX. CASE (PCS / REEL) SPACING SIZE (PCS / CARTON) CROSS "A" in FIG. A (m/m) 10 mm 380 * 340 * 370 TYPE DO-201AD 1,200 WEIGHT(kg) 4,800 9.1 AMMO PACKING DEVICE Q'TY 1 INNER CARTON Q'TY 2 APPROX. CASE (PCS / BOX) BOX SIZE SIZE (PCS / CARTON) CROSS (m/m) (m/m) TYPE DO-201AD 1,200 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 260 * 83 * 160 440 * 270 * 340 Page 4 WEIGHT(kg) 12,000 17.0 Document ID Issued Date Revised Date Revision Page. DS-222309 2012/09/10 - A 6 Formosa MS Axial Leaded Ultra Fast Rectifiers MUR460 BULK PACKING DEVICE Q'TY 1 INNER CARTON Q'TY 2 APPROX. CASE (PCS / BOX) BOX SIZE SIZE (PCS / CARTON) CROSS TYPE (m/m) DO-201AD 500 WEIGHT(kg) (m/m) 305 * 73 * 40 347 * 320 * 271 12,000 16.4 Suggested thermal profiles for soldering processes 1.Lead free temperature profile wave-soldering 280 Peak soldering temperature not to exceed 260ºC 260 240 220 Temperature(°C) 200 180 160 140 120 Peak Max well time 5 Max 100 80 Cool Down Max gradient-4ºC/s Suggested gradient - 2ºC/s or less 60 40 20 Preheat Max gradient 2ºC/s 0 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 5 Document ID Issued Date Revised Date Revision Page. DS-222309 2012/09/10 - A 6 Formosa MS Axial Leaded Ultra Fast Rectifiers MUR460 High reliability test capabilities Item Test Conditions Reference o 1. Solder Resistance at 260±5 C for 10±2sec. immerse body into solder 1/16"±1/32" MIL-STD-750D METHOD-2031 2. Solderability at 245±5 oC for 5 sec. MIL-STD-202F METHOD-208 3. Pull Test 2.0kg in axial lead direction for 10 sec. I F=I O 4. Bend Lead 5. High Temperature Reverse Bias 6. Forward Operation Life 7. Intermittent Operation Life 8. Pressure Cooker MIL-STD-202F METHOD-211A 2.0kg weight applied to each lead bending arc 90 o±5 o for 3 times MIL-STD-202F METHOD-211A V R=80% rate at T J=150 oC for 168 hrs. MIL-STD-750D METHOD-1038 Rated average rectifier current at T A=25 oC for 500hrs. MIL-STD-750D METHOD-1027 T A = 25 OC, I F = I O On state: power on for 5 min. off state: power off for 5 min, on and off for 500 cycles. MIL-STD-750D METHOD-1036 JESD22-A102 15P SIG at T A=121 oC for 4 hrs. MIL-STD-750D METHOD-1051 9. Temperature Cycling -55 oC to +125 oC dwelled for 30 min. and transferred for 5min. total 10 cycles. 10. Forward Surge 8.3ms single half sine-wave one surge. MIL-STD-750D METHOD-4066-2 11. Humidity at T A=85 oC, RH=85% for 1000hrs. MIL-STD-750D METHOD-1021 12. High Temperature Storage Life at 175 oC for 1000 hrs. MIL-STD-750D METHOD-1031 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 6 Document ID Issued Date Revised Date Revision Page. DS-222309 2012/09/10 - A 6