SEMiX341D16s Absolute Maximum Ratings Symbol Conditions Values Unit Tc = 85 °C 348 A Tc = 100 °C 267 A Tj = 25 °C 2500 A Tj = 130 °C 2000 A Tj = 25 °C 31250 A²s Tj = 130 °C 20000 A²s VRSM 1700 V VRRM 1600 V -40 ... 130 °C -40 ... 125 °C 1 min 4000 V 1s 4800 V Recitifier Diode ID IFSM i2t SEMiX® 13 Tj = 130 °C sinus 180° 10 ms 10 ms Tj Bridge Rectifier Module (uncontrolled) Module Tstg Visol SEMiX341D16s AC sinus 50Hz Characteristics Features • Terminal height 17 mm • Chips soldered directly to isolated substrate • UL recognised file no. E63532 Typical Applications* • Input Bridge Rectifier for AC/DC motor control • Power supply Symbol Conditions min. typ. max. Unit V Diode VF Tj = 25 °C, IF = 400 A 1.75 V(TO) Tj = 130 °C 0.9 V rT Tj = 130 °C 2.7 m IRD Tj = 130 °C, VRD = VRRM Rth(j-c) sin. 180 per diode 4.5 mA 0.22 K/W K/W Module Rth(c-s) per chip K/W per module 0.04 K/W Ms to heat sink (M5) 3 5 Mt to terminals (M6) 2.5 5 Nm 5 * 9,81 m/s² a w 350 Nm g D © by SEMIKRON Rev. 1 – 20.03.2013 1 SEMiX341D16s Fig. 4L: Power dissipation per module vs. direct current Fig. 4R: Power dissipation per module vs. case temperature Fig. 6: Transient thermal impedance vs. time Fig. 7: On-state characteristics Fig. 8: Surge overload current vs. time 2 Rev. 1 – 20.03.2013 © by SEMIKRON SEMiX341D16s spring configuration SEMiX 13 This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff. © by SEMIKRON Rev. 1 – 20.03.2013 3