SKKD 353/16 Absolute Maximum Ratings Symbol Conditions Values Unit Tc = 85 °C 350 A Tc = 100 °C 260 A 580 A 10500 A Recitifier Diode IFAV IFRMS IFSM SEMIPACK® 3 Rectifier Diode Modules i2t sin. 180° continuous operation 10 ms 10 ms Tj = 25 °C Tj = 130 °C 9500 A Tj = 25 °C 551250 A²s Tj = 130 °C 451250 A²s 1700 V VRSM VRRM Tj 1600 V -40 ... 130 °C Module SKKD 353/16 Features • Industrial standard package • Electrically insulated base plate • Heat transfer through aluminum oxide ceramic insulated metal base plate • Chip soldered on direct copper bonded Al2O3 ceramic • UL recognition applied for file no. E63532 Tstg Visol a.c.; 50 Hz; r.m.s. -40 ... 125 °C 1 min 3000 V 1s 3600 V Characteristics Symbol Conditions min. typ. max. Unit Diode VF Tj = 25 °C, IF = 750 A 1.38 V V(TO) Tj = 130 °C 0.84 V rT Tj = 130 °C 0.67 mΩ IRD Tj = 130 °C, VRD = VRRM Rth(j-c) Rth(j-c) cont. sin. 180° 15 mA per chip 0.09 K/W per module 0.045 K/W per chip 0.092 K/W per module 0.046 K/W Module Rth(c-s) chip 0.08 K/W module 0.04 K/W Ms to heatsink M5 4.25 Mt to terminals M8 7.65 5.75 a w 410 Nm 10.35 Nm 5 * 9,81 m/s² g SKKD © by SEMIKRON Rev. 1.0 – 01.06.2015 1 SKKD 353/16 Fig. 11L: Power dissipation per diode vs. forward current Fig. 11R: Power dissipation per diode vs. ambient temperature Fig. 12L: Power dissipation of two modules vs. direct current Fig. 12R: Power dissipation of two modules vs. case temperature Fig. 13L: Power dissipation of three modules vs. direct current Fig. 13R: Power dissipation of three modules vs. case temperature 2 Rev. 1.0 – 01.06.2015 © by SEMIKRON SKKD 353/16 Fig. 14: Transient thermal impedance vs. time Fig. 15: Forward characteristics Fig. 16: Surge overload current vs. time © by SEMIKRON Rev. 1.0 – 01.06.2015 3 SKKD 353/16 SKKD SEMIPACK 3 This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff. 4 Rev. 1.0 – 01.06.2015 © by SEMIKRON