RP TNC Male Right Angle Connector Crimp/ Solder Attachment For RG58 TECHNICAL DATA SHEET PE4678 RP TNC Male Right Angle Connector Crimp/Solder Attachment For RG58 Configuration Connector Connector Specification Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style TNC Male Reverse Polarity MIL-C-39012 RG58 Crimp/Solder Right Angle Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 1.13 [28.7] 0.59 [15] 1.345 [34.16] Weight, lbs [g] 0.061 [27.67] Connector Type Contact Material and Plating Contact Plating Specification Body Material and Plating Body Plating Specification Dielectric Type TNC Male Reverse Polarity Brass, Gold 3µ in. minimum Brass, Nickel 70µ in. minimum Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level RP TNC Male Right Angle Connector Crimp/Solder Attachment For RG58 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: RP TNC Male Right Angle Connector Crimp/Solder Attachment For RG58 PE4678 URL: http://www.pasternack.com/tnc-male-reverse-polarity-rg58-connector-pe4678-p.aspx PE4678 REV 1 © 2013 Pasternack Enterprises All Rights Reserved PE4678 REV CONTACT: .068" HEX CRIMP TOOL FERRULE: .213" HEX CRIMP TOOL CRIMP SIZE REQUIRED 3. SLIDE FERRULE OVER BRAID & CRIMP. 2. INSTALL CABLE INTO BODY. PUSH CABLE FORWARD UNTIL CONTACT IS IN THE CORRECT POSITION. 1. STRIP CABLE AS SHOWN. SLIDE FERRULE OVER CABLE & CRIMP CONTACT TO CENTER CONDUCTOR. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4678 DWG TITLE CAD FILE 060702 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. RP TNC Male Right Angle Connector Crimp/Solder Attachment For RG58 PE4678 CAD Drawing 2