T-1 (3mm) SOLID STATE LAMP ATTENTION P/N: L-934MBC BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description LOW POWER CONSUMPTION. The Blue source color devices are made with GaN on SiC POPULAR T-1 DIAMETER PACKAGE. Light Emitting Diode. GENERAL PURPOSE LEADS Static electricity and surge damage the LEDS. RELIABLE AND RUGGED. It is recommended to use a wrist band or LONG LIFE - SOLID STATE RELIABILITY. anti-electrostatic glove when handling the LEDs. AVAILABLE ON TAPE AND REEL. All devices, equipment and machinery must be electrically RoHS COMPLIANT. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAA1932 REV NO: V.6 DATE: APR/14/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.K.ZHNAG PAGE: 1 OF 3 Selection Guide Part No. Dice L-934MBC Iv (mcd) [2] @ 20 mA Lens Type BLUE (GaN) Viewing Angle [1] Min. Typ. 2θ θ1/2 36 80 20° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 430 nm IF=20mA Blue 466 nm IF=20mA Spectral Line Half-width Blue 60 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.8 4.5 V IF=20mA IR Reverse Current Blue 10 uA VR= 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAA1932 REV NO: V.6 DATE: APR/14/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.K.ZHNAG PAGE: 2 OF 3 Blue L-934MBC SPEC NO: DSAA1932 REV NO: V.6 DATE: APR/14/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.K.ZHNAG PAGE: 3 OF 3