11mm x 1.4mm BACKLIGHT PRELIMINARY SPEC Part Number: AA1114/2PBCA/CC BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description zLOW The Blue source color devices are made with InGaN on POWER CONSUMPTION. zIDEAL zMOISTURE zRoHS SiC Light Emitting Diode. FOR BACKLIGHTING. SENSITIVITY LEVEL : LEVEL 4. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic COMPLIANT. glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG5692 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/19/2006 DRAWN: Y.W.WANG PAGE: 1 OF 4 ERP: 1201002377 Selection Guide Dice Part No. AA1114/2PBCA/CC Iv (mcd) [2] @ 20mA Lens Type BLUE (InGaN) Viewing Angle [1] Min. Typ. 2θ1/2 18 50 120° WATER CLEAR Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity/ Luminous Flux: +/-15% Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 3.8 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm 2.Forward Voltage: +/-0.1V Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 114 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAG5692 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/19/2006 DRAWN: Y.W.WANG PAGE: 2 OF 4 ERP: 1201002377 BLUE AA1114/2PBCA/CC SPEC NO: DSAG5692 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/19/2006 DRAWN: Y.W.WANG PAGE: 3 OF 4 ERP: 1201002377 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAG5692 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu AA1114/2PBCA/CC DATE: JUN/19/2006 DRAWN: Y.W.WANG PAGE: 4 OF 4 ERP: 1201002377