CLAMP ON SENSOR 9650 < Clamp Sensors < Products Clamp Sensors (Current sensor -for the 3636-20 CLAMP LOGGER, and 8205-10/8206-10 MICRO HiCORDER-) CLAMP ON SENSOR 9650 CAT III 300 V CLAMP LOGGER 3636-20 OVERVIEW Clamp-on Sensors for the CLAMP LOGGER 3636-20, and MICRO HiCORDER 8205-10/8206-10 For input up to AC 500A, select our Model 9651, and for smaller currents of up to AC 100A, select Model 9650. Both sensors are designed with a safety barrier to protect the user from being in direct contact with live conductors and completely meet all CE marking requirements. Basic specifications Rated input current 100 A AC Rated output current 100 mA AC Accuracy (at 50/60 Hz) Amplitude: ±1.5 % rdg. ±0.03 % f.s. , Full scale (f.s.) is the rated input current value Frequency characteristics 40 Hz to 1 kHz (±8 % or less) Max. allowable input continuous 130 A rms (45 to 66 Hz) Max. circuit voltage 300 V AC rms (insulated wire) Core jaw dia. Ø15 mm(0.59 in) Dimensions, mass 46 mm(1.81 in)W × 135 mm(5.31 in)H × 21 mm(0.83 in)D, 200 g (7.1 oz), cord length: 3 m(9.84 ft) OVERVIEW Generated by www.PDFonFly.com CLAMP ON SENSOR 9651 < Clamp Sensors < Products Clamp Sensors (Current sensor -for the 3636-20 CLAMP LOGGER, and 8205-10/8206-10 MICRO HiCORDER-) CLAMP ON SENSOR 9651 CAT III 600 V CLAMP LOGGER 3636-20 OVERVIEW Clamp-on Sensors for the CLAMP LOGGER 3636-20, and MICRO HiCORDER 8205-10/8206-10 For input up to AC 500A, select our Model 9651, and for smaller currents of up to AC 100A, select Model 9650. Both sensors are designed with a safety barrier to protect the user from being in direct contact with live conductors and completely meet all CE marking requirements. Basic specifications Rated input current 500 A AC Rated output current 500 mA AC Accuracy (at 50/60 Hz) Amplitude: ±1.5 % rdg. ±0.03 % f.s. , Full scale (f.s.) is the rated input current value Frequency characteristics 40 Hz to 1 kHz (±3 % or less) Max. allowable input continuous 600 A rms (45 to 66 Hz) Max. circuit voltage 600 V AC rms (insulated wire) Core jaw dia. Ø46 mm(1.81 in) Dimensions, mass 77 mm(3.03 in)W × 151 mm(5.94 in)H × 42 mm(1.65 in)D, 340 g (12.0 oz), cord length: 3 m(9.84 ft) OVERVIEW Generated by www.PDFonFly.com CLAMP ON SENSOR 9668 < Clamp Sensors < Products Clamp Sensors (Current sensor -for the 3636-20 CLAMP LOGGER, and 8205-10/8206-10 MICRO HiCORDER-) CLAMP ON SENSOR 9668 CAT III 600 V MICRO HiCORDER 8205-10, 8206-10 OVERVIEW Clamp-on Sensors for MICRO HiCORDER 8205-10/8206-10 For input up to AC 1000A, select our Model 9668, This sensor is designed with a safety barrier to protect the user from being in direct contact with live conductors and completely meet all CE marking requirements. Basic specifications Rated input current 1000 A AC Rated output current 1000 mA AC Accuracy (at 45 to 66 Hz) Amplitude: ± 3.0 % rdg. ± 0.03 % f.s. , Full scale (f.s.) is the rated input current value Frequency characteristics 40 Hz to 1 kHz (±3 % or less) Max. allowable input continuous 1000 A rms (45 to 66 Hz) Max. circuit voltage 600 V AC rms (insulated wire) Core jaw dia. Ø55 mm(2.17 in), 80 mm (3.15 in) × 20 mm (0.79 in) busbar Dimensions, mass 99.5 mm(3.92 in)W × 188 mm(7.40 in)H × 42 mm(1.65 in)D, 550 g (19.4 oz), cord length: 3 m(9.84 ft) OVERVIEW Generated by www.PDFonFly.com