CLAMP ON PROBE 9132-10

CLAMP ON PROBE 9132-10 < Clamp Sensors < Products
Clamp Sensors (For power line current measurement 50/60 Hz use-)
CLAMP ON PROBE 9132-10
Insulated
BNC terminal
Model 9132
Insulated BANANA terminal
OVERVIEW
Easy-to-use, current to voltage transformer
●
●
Intended primarily for application as an input sensor for a recorder
A secondary output provides an AC voltage waveform, and can be connected to an input impedance over
1M-ohm
Basic specifications
Rated current
1000 A AC (20 A to 1000 A full scale, 6 ranges selectable)
Frequency band width
40 to 1 kHz (±1 % max.)
Accuracy (at 50 or 60 Hz)
±3 % rdg. ±0.5 mV
Output rate
0.2 V AC at full scale range (waveform output), Output terminal: Insulated BNC
Max. circuit voltage
600 V AC rms (insulated wire)
Core jaw dia.
Ø55 mm(2.17 in), or 80 mm(3.15 in) busbar
Power supply
None
Dimensions, mass
99 mm(3.90 in)W × 192 mm(7.56 in)H × 33 mm(1.30 in)D, 580 g (20.5 oz), cord length: 3
m(9.84 ft)
Accessories
None
OVERVIEW
Generated by www.PDFonFly.com