CLAMP ON PROBE 9018-50

CLAMP ON PROBE 9018-50 < Clamp Sensors < Products
Clamp Sensors (For power line current measurement 50/60 Hz use-)
CLAMP ON PROBE 9018-50
CAT III 600 V
OVERVIEW
OPTION
New & Improved! Easy-to-use, current to voltage transformer
●
●
●
●
●
Choose from up to six general-purpose ranges
Advanced phase characteristics
Intended primarily for application as an input sensor for a recorder
Accurately record and analyze waveforms and harmonic signals
Connect with optional BNC-Banana Adapter for greater flexibility
Basic specifications
Rated current
10/20/50/100/200/500A AC
Frequency band width
40 to 3 kHz (±1 % max.), phase ±2.5 ° max.
Accuracy (at 50 or 60 Hz)
±1.5 % rdg. ±0.1 % f.s.(45 to 66Hz)
Output rate
0.2 V AC at full scale range (AC voltage output), Connect to a voltage input device
providing a high input impedance of 1Mohm, etc.
Output terminal: Insulated BNC
Max. current input
150A rms (10/20/50A range)
400A rms (100/200A range)
650A rms (500A range)
Max. circuit voltage
600 V AC rms (insulated conductor)
Core jaw dia.
Ø46 mm(1.81 in)
Power supply
None
Dimensions, mass
74 mm(2.91 in)W × 190 mm (7.48 in)H × 35 mm(1.38 in)D, 420 g (14.8 oz), cord length: 3
m(9.84 ft)
Accessories
None
OVERVIEW
OPTION
Generated by www.PDFonFly.com