CLAMP ON SENSOR 9694 < Clamp Sensors < Products Clamp Sensors (Current sensor for Models 3169 and 3196) CLAMP ON SENSOR 9694 CAT III 300 V POWER QUALITY ANALYZER 3196 OVERVIEW Clamp-on Sensors for the POWER QUALITY ANALYZER 3196 and CLAMP ON POWER HiTESTER 3169 For input of 5A CT, select our Model 9694, This sensor is are designed with a safety barrier to protect the user from being in direct contact with live conductors and completely meet all CE marking requirements. Basic specifications Rated input current 5 A AC Rated output current 50 mV AC Accuracy (at 45 to 66 Hz) Amplitude: ±0.3 % rdg. ±0.02 % f.s. , Full scale (f.s.) is the 3196 range value, Phase: ±2° or less Frequency characteristics 66 Hz to 5 kHz (±1 % or less from accuracy) Max. allowable input continuous 50 A rms (45 to 66 Hz) Max. circuit voltage 300 V AC rms (insulated wire) Core jaw dia. Ø15 mm(0.59 in) Dimensions, mass 46 mm(1.81 in)W × 135 mm(5.31 in)H × 21 mm(0.83 in)D, 230 g (8.1 oz), cord length: 3 m(9.84 ft) OVERVIEW Generated by www.PDFonFly.com