POSIROT® PRAS/PRDS Position magnets Sensor Position magnet Air gap [mm] Parallelism [°] Error by axial misalignment [°] 0.2 mm PRAS1 PRAS2 PRAS5 PRAS20 PRAS21 PRAS27 0.5 mm PRDS5 PRDS27 4 mm 0 ... 6.5 0 ... 5 0.15 0.4 0.8 2.2 5.0 – 0 ... 4 0 ... 5 0.2 0.4 1.0 3.8 10 – PRMAG22 0 ... 9.5 0 ... 5 0.1 0.4 1.0 2.2 4.5 8.0 PRMAG20 0 ... 6 0 ... 5 0.15 0.4 0.8 2.2 5.0 – PRMAG21 0 ... 3.5 0 ... 5 0.2 0.4 1.0 3.8 10 – PRMAG22 0 ... 9.0 0 ... 5 0.1 0.4 1.0 2.2 4.5 8.0 PRMAG5-Z 0 ... 7.5 0 ... 5 0.1 0.2 0.6 1.5 4.5 8.5 PRMAG20 0 ... 5.5 0 ... 5 0.15 0.4 0.8 2.2 5.0 – PRMAG21 0 ... 3 0 ... 5 0.2 0.4 1.0 3.8 10 – PRMAG22 0 ... 8.5 0 ... 5 0.1 0.4 1.0 2.2 4.5 8.0 PRMAG20 0 ... 7 0 ... 5 0.1 0.3 0.7 2.0 4.6 – PRMAG21 0 ... 2 0 ... 5 0.15 0.3 0.9 3.6 9.6 – PRMAG22 0 ... 10 0 ... 5 0.0 0.0 0.7 1.5 3.8 7.0 PRMAG20 0 ... 7.0 0 ... 5 0.1 0.3 0.7 2.0 4.6 – PRMAG21 0 ... 2 0 ... 5 0.15 0.3 0.9 3.6 9.6 – PRMAG22 0 ... 10 0 ... 5 0.0 0.0 0.7 1.5 3.8 7.0 PRMAG20 0 ... 7.5 0 ... 5 0.1 0.3 0.7 2.0 4.6 – PRMAG21 0 ... 2.5 0 ... 5 0.15 0.3 0.9 3.6 9.6 – PRMAG22 0 ... 10.5 0 ... 5 0.0 0.0 0.7 1.5 3.8 7.0 b Position magnet Air gap [mm] c a a PRDS2 3 mm PRMAG20 c PRDS1 2 mm PRMAG21 b Sensor 1 mm Parallelism [°] Error by axial misalignment [°] 0.2 mm 0.5 mm 1 mm 2 mm 3 mm 4 mm PRMAG20 0 ... 4.5 0 ... 5 0.15 0.4 0.8 2.2 5.0 – PRMAG21 0 ... 2.0 0 ... 5 0.2 0.4 1.0 3.8 10 – PRMAG22 0 ... 7.5 0 ... 5 0.1 0.4 1.0 2.2 4.5 8.0 PRMAG20 0 ... 4 0 ... 5 0.15 0.4 0.8 2.2 5.0 – PRMAG21 0 ... 1.5 0 ... 5 0.2 0.4 1.0 3.8 10 – PRMAG22 0 ... 7 0 ... 5 0.1 0.4 1.0 2.2 4.5 8.0 PRMAG5-Z 0 ... 5.5 0 ... 5 0.1 0.2 0.6 1.5 4.5 8.5 PRMAG20 0 ... 3.5 0 ... 5 0.15 0.4 0.8 2.2 5.0 – PRMAG21 0 ... 1 0 ... 5 0.2 0.4 1.0 3.8 10 – PRMAG22 0 ... 6.5 0 ... 5 0.1 0.4 1.0 2.2 4.5 8.0 PRMAG20 0 ... 4.5 0 ... 5 0.15 0.4 0.8 2.2 5.0 – PRMAG22 0 ... 7.5 0 ... 5 0.0 0.0 0.7 1.5 3.8 7.0 POSIROT® Accessories J K 5 [.197] 13 [.512] Sensor / Sensor sensor Marking Markierung / marking Weight 11 g (0.39 oz.) approx., moment of inertia 1.2 kgmm2 A misalignment of the position magnet has an effect on the linearity J K K J Sensor Sensor / sensor 6,6 [.260] Weight 3 g (0.11 oz.) approx., moment of inertia 0.1 kgmm2 A misalignment of the position magnet has an effect on the linearity 2,7 [.106] 5 [.197] Markierung / Marking marking 3,7 [.146] 2,7 [.106] 16 [.630] 8 [.315] Sensor/ Sensor sensor PRMAG21 8 [.315] 3,5 [.138] J K 4,5 [.177] 4,5 [.177] 30 [1.181] PRMAG20 20 [.787] Position magnets Ø5,4 [.213] Sensor/ Sensor sensor Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions please consult factory. POSIROT® Accessories Position magnets PRMAG22 E 5 4, 5 6 ,5 F 26 36 22 6,4 F E Weight 17 g (0.6 oz.) approx., moment of inertia 3 kgmm2 15 6,5 Marking Markierung / marking A misalignment of the position magnet has an effect on the linearity Sensor 9 [.354] PRMAG5Z G H 8,2 [.323] H 10 [.394] 15 [.591] Sensor / sensor G Weight 100 g (3.52 oz.) approx., moment of inertia 55 kgmm2 14 [.551] Ø48 0,05 [1.890 0.002] [ A misalignment of the position magnet has an effect on the linearity ] Ø66 +- 00,1 2.598 +- 00.004 Sensor / Sensor sensor 5 [.197] Nut Notch / notch Markierung / Marking marking Sensor / Sensor sensor Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions please consult factory. POSIROT® Accessories Position magnets for angle sensors with Dust-Ex-proof Weight 22 g (1.06 oz.) approx. moment of inertia 4,5 kgmm2 h9 4,5 [.177] 5 [.197] 8 [.315] 7 1. 41 )[ 06 0, (- +0 h9 36 J 13 [.512] H 10 [.394] Nut Notch / notch Sensor / Sensor 3 [.118] A misalignment of the position magnet has an effect on the linearity H [ J 4,2 [.165] 26 +- 0,05 1.024 +- .002 0 0 ] (- +0 .0 0 2 )] PRMAG2Z-EX sensor Markierung / Marking marking Sensor / Sensor 9 [.354] PRMAG5-EX G H 8,2 [.323] H 10 [.394] 15 [.591] sensor G 14 [.551] Ø48 0,05 [ Weight 275 g (9.7 oz.) approx. moment of inertia 150 kgmm2 ] Ø66 +- 00,1 2.598 +- 00.004 Sensor / Sensor sensor NutNotch / notch 5 [.197] A misalignment of the position magnet has an effect on the linearity [1.890 0.002] Markierung / Marking marking Sensor / Sensor sensor EX - Explanation (II 3D Ex tD A22 IP65 T80°C X) II 3D Ex tD A22 IP65 T80°C X = for all Explosive Areas, excluding Surface and Underground Mining Systems = Equipment Category 3, applicable in Zone 22; D = dust = meets the requirements of the European Ex-Directive = type of ignition protection: protection by enclosure “tD” = measurement of the surface temperature acc. to procedure A for applications in Zone 22 = IP Protection Class = maximum surface temperature = tested with low impact energy POSIROT® Accessories Mounting Plates PRPT-BPL1 40 [1.575] ] 17 [.2 5 , 5 Ø33 [1.299] (screw mounting) For PRAS2, PRDS2, PRAS3, PRDS3 In combination with the mounting clamps PRPT-BFS1 (3 x M2.5) or in combination with the mounting bracket PRPT-BFS2 (3 x M4). 40 [1.575] 90 5 [.197] ° 11 0° 4 8 [1 4 2[ .890 ] 1.6 5 4] 3x M2,5 4 [.157] 4 [.157] 55 [2.165] 3x M4 Dimensions in mm [inch] Weight 30 g (1.06 oz.) approx. Dimensions informative only. For guaranteed dimensions please consult factory. PRPT-BPL2 Ø33 [1.299] (welding assembly) For PRAS2, PRDS2, PRAS3, PRDS3 90 In combination with the mounting clamps PRPT-BFS1 (3 x M2.5) or in combination with the mounting bracket PRPT-BFS2 (3 x M4). ° 11 0° 4 4 8 [1 2[ 4 [.157] 4 [.157] 3x M2,5 55 [2.165] 3x M4 .89 0 1.6 5 4] ] POSIROT® Accessories Mounting Plates PRPT-BPL3 For PRAS3, PRDS3 Dimensions in mm [inch] Weight 30g (1.06 oz.) approx. Dimensions informative only. For guaranteed dimensions please consult factory. Mounting possibilities PRAS2/PRDS2 PRAS3/PRDS3 PRPT-BPL2 + PRPT-BFS2 PRPT-BPL1 + PRPT-BFS2 PRPT-BPL2 + PRPT-BFS1 PRPT-BPL1 + PRPT-BFS1 POSIROT®/ POSITILT® Accessories Connector Cables Connector cable for POSIROT®POSITILT ® sensors 4 pins M12 Suitable for 5-pin sensor connectors M12A5 and M12R5 The 4-core screened cable is supplied with a mating 4-pin 90° M12 connector at one end and 4 wires at the other end. Available lengths are 6.6 ft. (2 m), 16.4 ft. (5 m) and 32.8 ft. (10 m). Order code: KAB - XM - M12/4F/W - LITZE IP69K: KAB - XM - M12/4F/W/69K - LITZE Length in m Connector cable for POSIROT®POSITILT ® sensors4 pins M12 Suitable for 5-pin sensor connectors M12A5 and M12R5 The 4-core screened cable is supplied with a mating 4-pin M12 connector at one end and 4 wires at the other end. Available lengths are 6.6 ft. (2 m), 16.4 ft. (5 m) and 32.8 ft. (10 m). Order code: KAB - XM - M12/4F/G - LITZE IP69K: KAB - XM - M12/4F/G/69K - LITZE Length in m Signal wiring M12, 4 pin Connector cable for POSIROT®POSITILT ® sensors 8 pins M12 Connector pin / cable color 1 Brown 2 White 3 Blue 4 Black The 8-core screened cable is supplied with a mating 8-pin 90° M12 connector at one end and 8 wires at the other end. Available lengths are 6.6 ft. (2 m), 16.4 ft. (5 m) and 32.8 ft. (10 m). Order code: KAB - XM - M12/8F/W - LITZE IP69K: KAB - XM - M12/8F/W/69K - LITZE Length in m Connector cable for POSIROT®POSITILT ® sensors 8 pins M12 The 8-core screened cable is supplied with a mating 8-pin M12 connector at one end and 8 wires at the other end. Available lengths are 6.6 ft. (2 m), 16.4 ft. (5 m) and 32.8 ft. (10 m). Order code: KAB - XM - M12/8F/G - LITZE IP69K: KAB - XM - M12/8F/G/69K - LITZE Length in m Signal wiring M12, 8 pin Connector pin / cable color 1 White 2 Brown 3 Green 4 Yellow 5 Grey 6 Pink 7 Blue 8 Red