PRODIS®-INC

PRODIS®-INC
PD-INC
Digital Process Meter for incremental Sensors
•
•
•
•
•
•
•
For position sensors with incremental output
Integrated sensor supply
Counting rate up to 250 kHz (<1 MHz edge frequency)
6-digit LED display
RS-232 interface
Optional 4 comparator outputs
Easy programming
PRODIS-INC is designed for use with incremental position sensors to display angles and
displacements. The fast counter processes 90° phase shifted A,B signals (quadrature
­signals) for direction and counting information. Sensor excitation is supplied from the meter.
With four membrane keys all parameters can be programmed for the special application. An
zero signal and a reference signal can be used for calibration of the measurement system.
Optional comparator functions with 4 NPN open-collector outputs are available, additional 2
of them have relay output.
Specifications
Display
Counting frequency
Excitation voltage/current
Sensor excitation
Inputs
Comparator outputs (option)
Relay
NPN
Connection
Operating temperature
Storage temperature
Weight
Protection class
Humidity
Safety of equipment
Electromagnetic compatibility, EMC
Order Code PRODIS-INC
6-digit, 7-segment LED, height 14 mm,
decimal point programmable
250 kHz max., 1 MHz edge frequency
24 V DC ±10%/150 mA, residual ripple 1%ss;
85-250 V AC, 50-60 Hz/180 mA max.
24 V DC/300 mA or 5V DC/500 mA
A, B, Z, T (reference signal)
250 V AC/5 A, 30 V DC/5 A
24 V max./50 mA to GND
Terminal strip 12-pole, excitation 3-pole
-10 ... +40 °C
-20 ... +85 °C
24 V DC: approx. 250 g; 230 V AC: approx. 400 g
Front IP60, rear IP40
Max. 80 % R.H., non condensing
Directive 2006/95/EWG:
DIN EN61010-1:2010
Directive 2004/108/EWG:
DIN EN61326-1:2013
PD-INC
Model name
Excitation voltage
24VDC = 24 V DC
230VAC= 85...250 V AC
Sensor excitation voltage
G24V = 24 V DC
G5V = 5 V DC
Sensor signal
HTL = HTL level with excitation voltage G24V
TTL = TTL level with excitation voltage G5V or G24V
Options
REL2 = Comparator
DT = Desktop version
Order example: PD - INC - 24VDC - G24V - HTL - REL2
PD-INC-DAT-US-13
www.asmsensors.com
[email protected]
1
PRODIS®-INC
PD-INC
Digital Process Meter for incremental Sensors
Programmable
parameters / value range
Wiring basic unit
Value range display, offset, limit values
Divisor, Multiplier
Other programmable parameters
-999999 to +999999
0 to 999999
Counting direction, decimal point position, last-value
memory, Z signal evaluation, display brightness
Manual zero, key lock, display value hold, Z release,
relative measurement activation
Signal T
Signals
Connector X1 pin no.
Sensor excitation +UB 24 V
Sensor excitation 0 V (GND)
Control input terminal 1: tare function
Control input terminal 2: programming lock
Voltage input terminal 0 ... 10 V, channel 1
Voltage input terminal 0 ... 10 V, channel 2
Current input terminal 0 ... 20 mA, channel 1
Current input terminal 0 ... 20 mA, channel 2
Voltage divider input terminal, channel 1
Voltage divider input terminal, channel 2
Reference voltage 5 V for voltage divider
GND
PD-INC-24VDC
Excitation +24 V
Excitation 0 V (GND)
PD-INC-230VAC
Excitation
Protective ground
Connector X2 pin no.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
13, 15
14
5 ........ 1
5 ........ 1
RS-232
Rear view without
comparator Output
RS-232 interface
Level
Data format
Transmission rate
Signals
1.....................................12
13 14 15
X1
X2
RS-232: ±8 V, galvanically isolated
1 start bit, 8 data bits, 1 stop bit, no parity
9600 Baud
Connector X3
Pin No.
TxD
RxD
GND
17
16
18
D-Sub
Pin No.
2
3
5
For rear view with comparator Output and outline drawings see pages 3 and 4.
2
PD-INC-DAT-US-13
1-888-ASM-USA-1
ASM Sensors, Inc.
PRODIS®-INC
PD-INC
Digital Process Meter for incremental Sensors
30
29
28
Rear view with
comparator Output
Comparator
function
(option)
Desktop version
(option)
27
26
25
24 .................................18..17..16
X3
X4
Comparator
Comparator output
NPN Connector X3
Collector pin no.
Comparator 1
NPN1
20
Comparator 2
NPN2
21
Comparator 3
Comparator 4
NPN3
NPN4
NPN GND
NPN UB (+24V)
22
23
24
19
RS-232
RS-232
Relay Connector X4
pin no.
LED
Relay 1
NO
NC
Common
Relay 2
NO
NC
Common
LED1
25
27
26
28
30
29
LED2
Mains switch
8 ............................. 1
15 ....................... 9
X1
85 ... 250 V AC
Wiring of connector X1 see table at page 2.
PD-INC-DAT-US-13
www.asmsensors.com
[email protected]
3
PRODIS®-INC
PD-INC
Digital Process Meter for incremental Sensors
Outline drawing
Cutout according to
DIN 43700
Dimensions in mm [inch]
PD-INC-24VDC- ...
Dimensions in mm [inch]
PD-INC-230VAC- ...
Dimensions informative only.
For guaranteed dimensions consult factory.
4
PD-INC-DAT-US-13
1-888-ASM-USA-1
ASM Sensors, Inc.