Click on Series name for product info on aimtec.com Series AM1/4L-NZ 1/4 Watt | DC-DC Converter FEATURES: RoHS Compliant SMD Package Low ripple and noise High efficiency up to 68% Operating temperature -40oC to + 85oC Input/Output Isolation 1000 and 3000VDC Pin compatible with multiple manufacturers UL94-VO Package Models Single output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) AM1/4L-0505S-NZ AM1/4L-1205S-NZ 4.5-5.5 10.8-13.2 5 5 50 50 1000 1000 64 65 AM1/4L-0505SH30-NZ AM1/4L-1205SH30-NZ AM1/4L-1212SH30-NZ 4.5-5.5 10.8-13.2 10.8-13.2 5 5 12 50 50 20 3000 3000 3000 64 66 67 Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) 21.6-26.4 ±5 ±25 1000 62 AM1/4L-0505DH30-NZ 4.5-5.5 ±5 ±25 * Not recommended for new design NOTE: Add suffix “TR” to a part number when ordering in tape and reel package 3000 64 Models Dual output Model *AM1/4L-2405D-NZ Input Specifications Parameters Parameters Voltage range Nominal Typical 5 12 24 Maximum 4.5-5.5 10.8-13.2 21.6-26.4 Capacitor Filter Units VDC Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec Rated Units 1000 & 3000 VDC MOhm pF Maximum Units > 1000 60 Output Specifications Parameters Voltage accuracy Voltage balance Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Ripple & Noise www.aimtec.com F 051e R8.J Conditions Typical See the tolerance graph Dual Output For 1% change of Vin For 1% change of Vin Load 10 – 100% Load 10 – 100% ±5 ±2 ±1.2 ±1.2 10 10 ±0.03 75 At 20MHz Bandwidth Tel: +1 514 620 2722 1 of 4 % % % % % % %/oC mV p-p Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1/4L-NZ 1/4 Watt | DC-DC Converter General Specifications Parameters Conditions Typical 100% load single 100% load dual Switching frequency Short circuit protection Operating temperature Storage temperature Cooling Humidity Case material Weight Maximum Units 100 150 Momentary (1sec) -40 to +85 -55 to +125 Free air convection Without derating KHz KHz oC oC 95 % Plastic UL94-VO 1.5 g Single 1000VDC 0.50 x 0.44 x 0.26 inch 12.70 x 11.20 x 6.70 mm Dimensions (L x W x H) Dual 1000VDC 0.60 x 0.44 x 0.26 inch 15.24 x 11.20 x 6.70 mm Single and Dual 3000 VDC 0.60 x 0.44 x 0.26 inch 15.24 x 11.20 x 6.70 mm MTBF >3 500 000hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) oC Max Case Temperature 95 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified Pin Out Specifications Single and Dual 1000VDC Pin Out Specifications Single and Dual 3000VDC Pin Single Pin Dual Pin Single Dual 1 2 3 4 5 6 7 8 - V Input + V Input N.C. - V Output + V Output N.C. N.C. N.C. 1 2 3 4 5 6 7 8 9 10 - V Input + V Input N.C. Common - V Output N.C. + V Output N.C. N.C. N.C. 1 2 3 5 6 7 8 10 11 12 - V Input + V Input N.C. -V Output N.C. N.C. +V Output N.C. N.C. N.C. - V Input + V Input N.C. Common -V Output N.C. +V Output N.C. N.C. N.C. Typical characteristics Tolerance Envelope Graph +10 % Typical Load Line + 5% +2.5% -2.5% Output Voltage Nominal Voltage -7.5% 10% www.aimtec.com F 051e R8.J 50% Output Current (%) 100% Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1/4L-NZ 1/4 Watt | DC-DC Converter Dimensions Single 1000VDC Front View 6.70 (0.26) Side View 4.13 (0.16) A 6.00 6.25 (0.24) (0.25) 0.30 (0.01) 0.25 (0.01) 7.00 (0.28) 1.85 (0.07) Top View A 12.70 (0.50) 7.62 (0.30) 0.50 (0.02) 5.00º angle 11.20 7.50 (0.44) (0.30) 1.50 (0.06) 1 0.50 (0.02) 2.54 (0.10) All dimensions are in mm (inch) All Pins are on a 2.54mm (0.10inch) pitch with tolerance of ±0.25mm (0.01inch) Dimensions Dual 1000VDC Front View 6.70 (0.26) Side View 4.13 (0.16) 6.00 (0.24) A 6.25 (0.25) 0.30 (0.01) 0.25 (0.01) 1.85 (0.07) Top View 7.00 (0.28) 15.24 (0.60) A 7.62 (0.30) 0.50 (0.02) 11.20 7.50 (0.44) (0.30) 5.00º angle 1 1.50 (0.06) 2.54 (0.10) 0.50 (0.02) All dimensions are in mm (inch) All Pins are on a 2.54mm (0.10inch) pitch with tolerance of ±0.25mm (0.01inch) www.aimtec.com F 051e R8.J Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1/4L-NZ 1/4 Watt | DC-DC Converter Dimensions single and dual 3000VDC Front View Side View 6.70 (0.26) 4.13 (0.16) 6.00 (0.24) A 6.25 (0.25) 0.30 (0.01) 0.25 (0.01) 1.85 (0.07) 7.00 (0.28) Top View A 15.24 (0.60) 0.50 (0.02) 11.20 7.50 (0.44) (0.30) 5.00º angle 1 0.50 (0.02) 2.54 (0.10) 1.50 (0.06) All dimensions are in mm (inch) All Pins are on a 2.54mm (0.10inch) pitch with tolerance of ±0.25mm (0.01inch) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R8.J Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only